EN 61499-4:2006
(Main)Function blocks - Part 4: Rules for compliance profiles
Function blocks - Part 4: Rules for compliance profiles
Defines rules for the development of compliance profiles which specify the features of EN 61499-1 and 61499-2 to be implemented in order to promote the following attributes of EN 61499-based systems, devices and software tools:
Funktionsbausteine - Teil 4: Regeln für normgerechte Profile
Blocs fonctionnels - Partie 4: Règles pour la conformité des profils
Defines rules for the development of compliance profiles which specify the features of EN 61499-1 and 61499-2 to be implemented in order to promote the following attributes of EN 61499-based systems, devices and software tools:
Funkcijski bloki – 4. del: Pravila za ustreznostne profile (IEC 61499-4:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61499-4:2006
01-julij-2006
Funkcijski bloki – 4. del: Pravila za ustreznostne profile (IEC 61499-4:2005)
Function blocks - Part 4: Rules for compliance profiles
Funktionsbausteine - Teil 4: Regeln für normgerechte Profile
Blocs fonctionnels - Partie 4: Règles pour la conformité des profils
Ta slovenski standard je istoveten z: EN 61499-4:2006
ICS:
25.040.40
SIST EN 61499-4:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 61499-4
NORME EUROPÉENNE
April 2006
EUROPÄISCHE NORM
ICS 25.040.40
English version
Function blocks
Part 4: Rules for compliance profiles
(IEC 61499-4:2005)
Blocs fonctionnels Funktionsbausteine
Partie 4: Règles pour la conformité Teil 4: Regeln für normgerechte Profile
des profils (IEC 61499-4:2005)
(CEI 61499-4:2005)
This European Standard was approved by CENELEC on 2006-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61499-4:2006 E
---------------------- Page: 2 ----------------------
EN 61499-4:2006 - 2 -
Foreword
The text of the International Standard IEC 61499-4:2005, prepared by IEC TC 65, Industrial-process
measurement and control, was submitted to the formal vote and was approved by CENELEC as
EN 61499-4 on 2006-02-01 without any modification.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-02-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61499-4:2005 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 61499-4:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 61499-1 - Function blocks EN 61499-1 2005
Part 1: Architecture
1) 2)
IEC 61499-2 - Part 2: Software tools requirements EN 61499-2 2005
1) 1)
ISO/IEC DIR-2, - ISO/IEC Directives CEN/CENELEC -
3)
mod. Part 2: Rules for the structure and IR 3
drafting of International Standards
1)
Undated reference.
2)
Valid edition at date of issue.
3)
CEN/CENELEC Internal Regulations – Part 3: Rules for the structure and drafting of CEN/CENELEC publications
---------------------- Page: 4 ----------------------
INTERNATIONAL IEC
STANDARD 61499-4
First edition
2005-08
Function blocks –
Part 4:
Rules for compliance profiles
IEC 2005 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Swit
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.