Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

This standard applies to switches, disconnectors, switch-disconnectors and fuse-combination units to be used in distribution circuits and motor circuits of which the rated voltage does not exceed 1 000 V a.c. or 1 500 V d.c. The manufacturer shall specify the type, ratings and characteristics according to the relevant standard of any incorporated fuses. This standard does not apply to equipment coming within the scope of EN 60947-2, EN 60947-4-1 and EN 60947-5-1; however, when switches and fuse-combination units coming into the scope of this standard are normally used to start, accelerate and/or stop an individual motor they shall also comply with the additional requirements given in Appendix A. This standard does not include the additional requirements necessary for electrical apparatus for explosive gas atmospheres. Notes 1. Depending on its design, a switch (or disconnector) can be referred to as "a rotary switch (disconnector)", "camoperated switch (disconnector)", "knife-switch (disconnector)", etc. 2. If they are not manually operated, switches and disconnectors may have to comply with additional requirements. 3. In this standard, the word "switch" also applies to the apparatus referred to in French as "commutateurs", intended to modify the connections between several circuits and inter alia to substitute a part of a circuit for another. 4. In general, throughout this standard switches, disconnectors, switch-disconnectors and fuse-combination units will be referred to as "equipment".

Niederspannungsschaltgeräte - Teil 3: Lastschalter, Trennschalter, Lasttrennschalter und Schalter-Sicherungs-Einheiten

Appareillage à basse tension - Partie 3: Interrupteurs, sectionneurs, interrupteurs-sectionneurs et combinés-fusibles

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 947-3:1990 + corrigendum Dec.1991 (Modified))

General Information

Status
Withdrawn
Publication Date
29-Apr-1992
Withdrawal Date
28-Feb-1993
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Jan-2002
Completion Date
01-Jan-2002

Relations

Buy Standard

Standard
EN 60947-3:1998
English language
62 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-1998
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-
disconnectors and fuse-combination units (IEC 947-3:1990 + corrigendum
Dec.1991 (Modified))
Low-voltage switchgear and controlgear -- Part 3: Switches, disconnectors, switch-
disconnectors and fuse-combination units
Niederspannungsschaltgeräte -- Teil 3: Lastschalter, Trennschalter, Lasttrennschalter
und Schalter-Sicherungs-Einheiten
Appareillage à basse tension -- Partie 3: Interrupteurs, sectionneurs, interrupteurs-
sectionneurs et combinés-fusibles
Ta slovenski standard je istoveten z: EN 60947-3:1992
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.