EN 60317-28:1996
(Main)Specifications for particular types of winding wires - Part 28: Polyesterimide enamelled rectangular copper wire, class 180
Specifications for particular types of winding wires - Part 28: Polyesterimide enamelled rectangular copper wire, class 180
Former HD 555.28 S1
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 28: Flachdrähte aus Kupfer, lackisoliert mit Polyesterimid, Klasse 180
Spécifications pour types particuliers de fils de bobinage - Partie 28: Fil de section rectangulaire en cuivre émaillé avec polyesterimide, classe 180
Specifications for particular types of winding wires - Part 28: Polyesterimide enamelled rectangular copper wire, class 180
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60317-28:2001
01-september-2001
Specifications for particular types of winding wires - Part 28: Polyesterimide
enamelled rectangular copper wire, class 180
Specifications for particular types of winding wires -- Part 28: Polyesterimide enamelled
rectangular copper wire, class 180
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten -- Teil 28:
Flachdrähte aus Kupfer, lackisoliert mit Polyesterimid, Klasse 180
Spécifications pour types particuliers de fils de bobinage -- Partie 28: Fil de section
rectangulaire en cuivre émaillé avec polyesterimide, classe 180
Ta slovenski standard je istoveten z: EN 60317-28:1996
ICS:
29.060.10 Žice Wires
SIST EN 60317-28:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60317-28:2001
---------------------- Page: 2 ----------------------
SIST EN 60317-28:2001
---------------------- Page: 3 ----------------------
SIST EN 60317-28:2001
---------------------- Page: 4 ----------------------
SIST EN 60317-28:2001
---------------------- Page: 5 ----------------------
SIST EN 60317-28:2001
---------------------- Page: 6 ----------------------
SIST EN 60317-28:2001
CEI
NORME
IEC
INTERNATIONALE
317-28
INTERNATIONAL
Première édition
STANDARD
First edition
1990-10
Spécifications pour types particuliers
de fils de bobinage
Partie 28:
Fil de section rectangulaire en cuivre émaillé
avec polyesterimide, classe 180
Specifications for particular types
of winding wires
Part 28:
Polyesterimide enamelled rectangular
copper wire, class 180
© CEI 1990 Droits de reproduction réservés —
Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni
No part of this publication may be reproduced or utilized In
utilisée sous quelque forme que ce soit et par aucun pro-
any form or by any means, electronic or mechanical,
cédé, électronique ou mécanique, y compris la photocopie et
k cltd g photocopying and microfilm, without permission
les microfilms, sans l'accord écrit de l'éditeur.
h writing from the publisher.
Bureau Central de la Commission Electrotechnique Inte
rnationale 3, rue de Varembé Genève, Suisse
Commission Electrotechnique
Internationale
CODE PRIX
International
Electrotechnical
Commission
PRICE CODE
IEC
Meninyttapo u4aa 3neKrporextHw ecMatt
KoMHCC.tw
• •
Po
ur prix, voir catalogue en afgueur
For prloe, see current cata
logue
---------------------- Page: 7 ----------------------
SIST EN 60317-28:2001
317-28 ©IEC - 3 -
CONTENTS
Page
FOREWORD 5
INTRODUCTION 7
Clause
1 Scope 9
2 Normati
ve references 9
3 Definitions and general notes on methods of test 11
4 Dimensions 11
5 Electrical resistance 11
6 Elongation 11
7 Springiness 11
8 Flexibility and adherence 11
9 Heat shock 11
10 Cut-through 11
11 Resistance to abrasion 11
12 Resistance to solvents 11
13 Breakdown voltage 11
14 Continuity of insulation 13
15 Temperature index 13
16 Resistance to refrigerants 13
17 Solderability 13
18 Heat or solvent bonding 13
19 Dielectric dissipation factor 13
20 Resistance to transformer oil 13
21 Loss of mass 13
22 High temperature failure 13
30 Packaging 13
---------------------- Page: 8 ----------------------
SIST EN 60317-28:2001
- 5 -
317-28 © IEC
INTERNATIONAL ELECTROTECHNICAL COMMISSION
SPECIFICATIONS FOR PARTICULAR TYPES
OF WINDING WIRES
Part 28: Polyesterimide enamelled rectangular copper wire,
class 180
FOREWORD
1) The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
They have the form of recommendations for international use and they are accepted by the National
2)
Committees in that sense.
In order to promote international unification, the IEC expresses the wish that all National Committees
3)
should adopt the text of the IEC recommendation for their national rules in so far as national conditions will
permit. Any divergence between the IEC recommendation and the corresponding national rules should, as
far as possible, be clearly indicated in the latter.
This International Standard has been prepared by IEC Technical Committee No. 55:
Winding wires.
It has been decided to issue IEC 182 and IEC 317 in a new layout. The text of IEC 182
has been incorporated into the relevant IEC 317 without technical changes. All general
requirements for enamelled rectangular copper wires have been removed to IEC 317-0-2
without technical changes.
The text of this standard is based on the following documents:
Report on Voting
Six Months' Rule
55(CO)382 55(CO)402
Full information on the voting for the approval of this standard can be found in the Voting
Report indicated in the table above.
--------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.