EN 61747-2-1:2013
(Main)Liquid crystal display devices - Part 2-1: Passive matrix monochrome LCD modules - Blank detail specification
Liquid crystal display devices - Part 2-1: Passive matrix monochrome LCD modules - Blank detail specification
IEC 61747-2-1:2013 serves as a Blank Detail Specification (BDS) for a high quality approval system and contains requirements for style and layout and minimum content of detail specifications. These requirements are applicable when the detail specification is published (e.g. for standard product). This second edition of IEC 61747-2-1 cancels and replaces the first edition published in 1998, and constitutes a technical revision. The main changes from the previous edition are as follows: - several words and test conditions were added in Clause 7 and Clause 8; - the new edition was editorially changed according to the current ISO/IEC Directives - Part 2.
Flüssigkristall-Anzeige-Bauelemente – Teil 2-1: Einfarbige passive Matrix-Flüssigkristall-Anzeigemodule (LCD-Module) – Vordruck für Bauartspezifikation
Dispositifs d’affichage à cristaux liquides - Partie 2-1: Modules d'affichage à cristaux liquides (LCD) monochromes à matrice passive - Spécification particulière cadre
La CEI 61747-2-1:2013 sert de Spécification Particulière Cadre (SPC) en vue d'un système d'homologation de qualité élevée et elle contient des exigences relatives au modèle et à la présentation ainsi qu'au contenu minimal des spécifications particulières. Ces exigences sont applicables une fois que la spécification particulière est publiée (ex. pour un produit normalisé). Cette deuxième édition de la CEI 61747-2-1 annule et remplace la première édition parue en 1998, dont elle constitue une révision technique. Les modifications principales par rapport à l'édition antérieure sont les suivantes: - plusieurs mots et conditions d'essais ont été ajoutés à l'Article 7 et l'Article 8; - la nouvelle édition a subi des modifications rédactionnelles conformément aux Directives ISO/CEI, Partie 2 actuelles.
Prikazovalniki s tekočimi kristali - 2-1. del: Pasivni matrični enobarvni moduli LCD - Okvirna podrobna specifikacija
Ta del standarda IEC 61747 je okvirna podrobna specifikacija za visokokakovostni sistem odobritve ter vsebuje zahteve glede sloga in postavitve ter minimalne vsebine v podrobni specifikaciji. Te zahteve se uporabljajo ob izdaji podrobne specifikacije (npr. za proizvod po standardu).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2013
1DGRPHãþD
SIST EN 61747-2-1:2002
3ULND]RYDOQLNLVWHNRþLPLNULVWDOLGHO 3DVLYQLPDWULþQLHQREDUYQLPRGXOL/&'
2NYLUQDSRGUREQDVSHFLILNDFLMD
Liquid crystal display devices - Part 2-1: Passive matrix monochrome LCD modules -
Blank detail specification
/
Dispositifs d’affichage à cristaux liquides - Partie 2-1: Modules d'affichage à cristaux
liquides (LCD) monochromes à matrice passive - Spécification particulière cadre
Ta slovenski standard je istoveten z: EN 61747-2-1:2013
ICS:
31.120 Elektronske prikazovalne Electronic display devices
naprave
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61747-2-1
NORME EUROPÉENNE
June 2013
EUROPÄISCHE NORM
ICS 31.120 Supersedes EN 61747-2-1:2001
English version
Liquid crystal display devices -
Part 2-1: Passive matrix monochrome LCD modules -
Blank detail specification
(IEC 61747-2-1:2013)
Dispositifs d’affichage à cristaux liquides - Flüssigkristall-Anzeige-Bauelemente -
Partie 2-1: Modules d'affichage à cristaux Teil 2-1: Einfarbige passive Matrix-
liquides (LCD) monochromes à matrice Flüssigkristall-Anzeigemodule (LCD-
passive - Module) – Vordruck für
Spécification particulière cadre Bauartspezifikation
(CEI 61747-2-1:2013) (IEC 61747-2-1:2013)
This European Standard was approved by CENELEC on 2013-04-22. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61747-2-1:2013 E
Foreword
The text of document 110/371/CDV, future edition 2 of IEC 61747-2-1, prepared by IEC TC 110
"Electronic display devices" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 61747-2-1:2013.
The following dates are fixed:
• latest date by which the document has (dop) 2014-01-22
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-04-22
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61747-2-1:2001.
1:2001:
– several words and test conditions were added in Clause 7 and Clause 8;
– the new edition was editorially changed according to the current CEN-CENELEC Internal Regulations –
Part 3.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61747-2-1:2013 was approved by CENELEC as a European
Standard without any modification.
- 3 - EN 61747-2-1:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 61747-1 1998 Liquid crystal and solid-state display devices - EN 61747-1 1999
+ A1 2003 Part 1: Generic specification + A1 2003
IEC 61747-2 1998 Liquid crystal and solid-state display devices - EN 61747-2 1999
Part 2: Liquid crystal display modules -
Sectional specification
IEC 61747-5 1998 Liquid crystal and solid-state display devices - EN 61747-5 1998
Part 5: Environmental, endurance and
mechanical test methods
IEC 61747-2-1 ®
Edition 2.0 2013-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Liquid crystal display devices –
Part 2-1: Passive matrix monochrome LCD modules – Blank detail specification
Dispositifs d’affichage à cristaux liquides –
Partie 2-1: Modules d'affichage à cristaux liquides (LCD) monochromes à
matrice passive – Spécification particulière cadre
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX N
ICS 31.120 ISBN 978-2-83220-689-8
– 2 – 61747-2-1 © IEC:2013
CONTENTS
FOREWORD . 3
1 General . 5
1.1 Scope . 5
1.2 Normative references . 5
2 Guidance for preparation of a detail specification . 5
3 Marking . 7
4 Ordering information . 7
5 Limiting values (absolute maximum rating system) . 7
6 Operating range and electrical and optical characteristics . 9
6.1 Recommended operating range . 9
6.2 Electrical and optical characteristics . 10
7 Test conditions and inspection requirements . 11
8 Qualification approval test (group D) . 13
9 Additional information . 13
Annex A (informative) Additional information items . 14
Figure 1 – Block diagram examples for explanation of supply voltages . 9
Table 1 – Limiting values . 8
Table 2 – Recommended operating range . 10
Table 3 – Electrical and optical characteristics . 11
Table 4 – Group A – Lot-by-lot inspection . 12
Table 5 – Group B – Lot-by-lot inspection . 12
Table 6 – Group C – Periodic tests . 12
61747-2-1 © IEC:2013 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LIQUID CRYSTAL DISPLAY DEVICES –
Part 2-1: Passive matrix monochrome LCD modules –
Blank detail specification
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61747-2-1 has been prepared by IEC technical committee 110:
Electronic display devices.
This second edition of IEC 61747-2-1 cancels and replaces the first edition published in 1998,
and constitutes a technical revision. The main changes from the previous edition are as
follows:
– several words and test conditions were added in Clause 7 and Clause 8;
– the new edition was editorially changed according to the current ISO/IEC Directives –
Part 2.
– 4 – 61747-2-1 © IEC:2013
The text of this standard is based on the following documents:
CDV Report on voting
110/371/CDV 110/446/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts in the IEC 61747 series, under the general title Liquid crystal display
devices, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
61747-2-1 © IEC:2013 – 5 –
LIQUID CRYSTAL DISPLAY DEVICES –
Part 2-1: Passive matrix monochrome LCD modules –
Blank detail specification
1 General
1.1 Scope
This part of IEC 61747 serves as a Blank Detail Specification (BDS) for a high quality
approval system and contains requirements for style a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.