EN 61747-6-2:2011
(Main)Liquid crystal display devices - Part 6-2: Measuring methods for liquid crystal display modules - Reflective type
Liquid crystal display devices - Part 6-2: Measuring methods for liquid crystal display modules - Reflective type
IEC 61747-6-2:2011 gives details of the quality assessment procedures, the inspection requirements, screening sequences, sampling requirements, and test and measurement procedures required for the assessment of liquid crystal display modules. The purpose of this standard is to indicate and list the procedure-dependent parameters and to prescribe the specific methods and conditions that are to be used for their uniform numerical determination. The contents of the corrigendum of January 2012 have been included in this copy.
Flüssigkristall-Anzeige-Bauelemente - Teil 6-2: Messverfahren für Flüssigkristall-Anzeigemodule - Reflektive Ausführung
Dispositifs d'affichage à cristaux liquides - Partie 6-2: Méthodes de mesure pour les modules d'affichage à cristaux liquides - Type réflexible
La CEI 61747-6-2:2011 définit de manière détaillée les procédures d'évaluation de la qualité, les exigences d'inspection, les séquences d'examen, les exigences d'échantillonnage ainsi que les procédures d'essai et de mesure requises pour l'évaluation des modules d'affichage à cristaux liquides. L'objectif de la présente norme est d'indiquer et d'énumérer les paramètres qui dépendent de la procédure, ainsi que de prescrire les méthodes et conditions spécifiques à utiliser pour en obtenir une détermination numérique uniforme. Le contenu du corrigendum de janvier 2012 a été pris en considération dans cet exemplaire.
Prikazovalniki s tekočimi kristali - 6-2. del: Merilne metode za module prikazovalnikov s tekočimi kristali - Odsevni tip
Ta del IEC 61747 podaja podrobnosti postopkov ocenjevanja kakovosti, zahteve za pregled, zaporedja projiciranja, zahteve za vzorčenje ter preskusne in merilne postopke, potrebne za ocenjevanje modulov prikazovalnikov s tekočimi kristali. Ta standard je omejen na module odsevnih prikazovalnikov s tekočimi kristali, ki uporabljajo segmentno, pasivno ali aktivno matrico, in akromatske ali barvne LCD (glej opombo). Poleg tega ta standard vključuje tudi odsevne načine odbojno-prepustnih modulov LCD z izključeno osvetlitvijo iz ozadja in odsevne module LCD s sprednjo osvetlitvijo brez enote za sprednjo osvetlitev. Odsevni modul LCD s kombinacijo tipkovnice na dotik ali enoto za sprednjo osvetlitev je zunaj okvira uporabe tega standarda, ker meritve pogosto niso točne. Preden se vključi v obseg uporabe, je treba tipkovnico na dotik ali enoto za sprednjo osvetlitev odstraniti. Namen tega standarda je prikazati in navesti parametre, odvisne od postopkov, in predpisati specifične metode in pogoje, ki se uporabljajo za njihovo enotno številčno določevanje.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.PRGXOHDispositifs d'affichage à cristaux liquides - Partie 6-2 : Méthodes de mesure pour les modules d'affichage à cristaux liquides - Type réflexibleLiquid crystal display devices - Part 6-2: Measuring methods for liquid crystal display modules - Reflective type31.120Elektronske prikazovalne napraveElectronic display devicesICS:Ta slovenski standard je istoveten z:EN 61747-6-2:2011SIST EN 61747-6-2:2011en01-oktober-2011SIST EN 61747-6-2:2011SLOVENSKI
STANDARD
SIST EN 61747-6-2:2011
EUROPEAN STANDARD EN 61747-6-2 NORME EUROPÉENNE
EUROPÄISCHE NORM August 2011
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61747-6-2:2011 E
ICS 31.120
English version
Liquid crystal display devices -
Part 6-2: Measuring methods for liquid crystal display modules -
Reflective type (IEC 61747-6-2:2011)
Dispositifs d'affichage à cristaux liquides - Partie 6-2: Méthodes de mesure pour les modules d'affichage à cristaux liquides -
Type réflexible (CEI 61747-6-2:2011)
Flüssigkristall-Anzeige-Bauelemente -
Teil 6-2: Messverfahren für Flüssigkristall-Anzeigemodule -
Reflektive Ausführung (IEC 61747-6-2:2011)
This European Standard was approved by CENELEC on 2011-07-15. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 61747-6-2:2011
EN 61747-6-2:2011 - 2 -
Foreword The text of document 110/281/FDIS, future edition 1 of IEC 61747-6-2, prepared by IEC TC 110, Flat panel display devices, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61747-6-2 on 2011-07-15. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2012-04-15 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2014-07-15 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61747-6-2:2011 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: [19] IEC 61747-6 NOTE
Harmonized as EN 61747-6. [20] ISO 9241-7 NOTE
Harmonized as EN ISO 9241-7. [21] ISO 13406-2 NOTE
Harmonized as EN ISO 13406-2. [23] IEC 61747-1 NOTE
Harmonized as EN 61747-1. [24] IEC 61747-5 NOTE
Harmonized as EN 61747-5. __________
SIST EN 61747-6-2:2011
- 3 - EN 61747-6-2:2011
Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
ISO 11664-2 2007 Colorimetry -
Part 2: CIE standard illuminants
EN ISO 11664-2 2011
CIE 15.2 - CIE Recommendations on Colorimetry - -
CIE 17.4 - International Lighting Vocabulary - -
CIE 38 - Radiometric and photometric characteristics of materials and their measurement - -
CIE 1931 - CIE XYZ colour space - -
CIE 1976 - CIE LAB colour space - -
SIST EN 61747-6-2:2011
SIST EN 61747-6-2:2011
IEC 61747-6-2 Edition 1.0 2011-06 INTERNATIONAL STANDARD NO
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.