EN IEC 63207:2022
(Main)Measurement methods of blue light characteristics and related optical performance for visual display terminals
Measurement methods of blue light characteristics and related optical performance for visual display terminals
IEC 63207:2022 specifies measurement methods for optical performance (luminance) and blue light characteristics (BLCs) of visual display terminals (VDTs), excluding displays for outdoor use only.
Messverfahren von Eigenschaften des blauen Lichts und ähnlichen optischen Leistungen für visuelle Anzeigeeinheiten
Méthodes de mesure des caractéristiques de la lumière bleue et des performances optiques associées des terminaux à écran de visualisation
L'IEC 63207:2022 spécifie des méthodes de mesure des performances optiques (luminance) et des caractéristiques de la lumière bleue (BLC) des terminaux à écran de visualisation (VDT), à l'exclusion des écrans destinés exclusivement à un usage extérieur.
Metode merjenja značilnosti modre svetlobe in s tem povezanih optičnih zmogljivosti za slikovno zaslonsko opremo (IEC 63207:2022)
IEC 63207:2022 določa merilne metode za optično zmogljivost (svetilnost) in značilnosti modre svetlobe (BLC) slikovnih zaslonskih terminalov (VDT), razen zaslonov samo za zunanjo uporabo.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2023
Metode merjenja značilnosti modre svetlobe in s tem povezanih optičnih
zmogljivosti za slikovno zaslonsko opremo (IEC 63207:2022)
Measurement methods of blue light characteristics and related optical performance for
visual display terminals (IEC 63207:2022)
Messverfahren von Eigenschaften des blauen Lichts und ähnlichen optischen
Leistungen für visuelle Anzeige Einheiten (IEC 63207:2022)
Méthodes de mesure des caractéristiques de la lumière bleue et des performances
optiques associées des terminaux à écran de visualisation (IEC 63207:2022)
Ta slovenski standard je istoveten z: EN IEC 63207:2022
ICS:
17.180.20 Barve in merjenje svetlobe Colours and measurement of
light
31.120 Elektronske prikazovalne Electronic display devices
naprave
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 63207
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2022
ICS 33.160.60; 35.180; 31.120
English Version
Measurement methods of blue light characteristics and related
optical performance for visual display terminals
(IEC 63207:2022)
Méthodes de mesure des caractéristiques de la lumière Messverfahren von Eigenschaften des blauen Lichts und
bleue et des performances optiques associées des ähnlichen optischen Leistungen für visuelle Anzeige
terminaux à écran de visualisation Einheiten
(IEC 63207:2022) (IEC 63207:2022)
This European Standard was approved by CENELEC on 2022-11-02. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63207:2022 E
European foreword
The text of document 100/3798/FDIS, future edition 1 of IEC 63207, prepared by IEC/TC 100 "Audio,
video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 63207:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-08-02
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-11-02
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 63207:2022 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 61747-30-1:2012 NOTE Harmonized as EN 61747-30-1:2012 (not modified)
IEC 61966-4:2000 NOTE Harmonized as EN 61966-4:2000 (not modified)
IEC 63207 ®
Edition 1.0 2022-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Measurement methods of blue light characteristics and related optical
performance for visual display terminals
Méthodes de mesure des caractéristiques de la lumière bleue et des
performances optiques associées des terminaux à écran de visualisation
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.120; 33.160.60; 35.180 ISBN 978-2-8322-5702-9
– 2 – IEC 63207:2022 © IEC 2022
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviated terms . 6
3.1 Terms and definitions . 6
3.2 Abbreviated terms . 8
4 Measurement conditions . 8
4.1 Environmental conditions . 8
4.2 Power supply . 8
4.3 Stabilized condition of VDT . 9
4.4 Light-measurement device . 9
4.4.1 Spectral radiance meter . 9
4.4.2 Luminance meter . 9
4.4.3 Illuminance meter . 9
4.5 Test settings . 9
5 Measurement method of luminance . 11
5.1 General . 11
5.2 Measurement procedure . 11
6 Measurement methods of blue light performances . 12
6.1 Blue light radiance . 12
6.1.1 General . 12
6.1.2 Methods of measurement . 12
6.2 Narrow band blue light spectrum ratio . 12
6.2.1 General . 12
6.2.2 Methods of measurement . 12
7 Test report . 13
Bibliography . 14
Figure 1 – Layout diagram of measurement setup with terminology. 10
Figure 2 – Location of test point for luminance . 11
IEC 63207:2022 © IEC 2022 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MEASUREMENT METHODS OF BLUE LIGHT CHARACTERISTICS AND
RELATED OPTICAL PERFORMANCE FOR VISUAL DISPLAY TERMINALS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 63207 has been prepared by technical area 2: Colour measurement and management, of
IEC technical committee 100: Audio, video and multimedia systems and equipment. It is an
International Standard.
The text of this International Standard is based on the following documents:
Draft Report on voting
100/3798/FDIS 100/3819/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications.
– 4 – IEC 63207:2022 © IEC 2022
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The "colour inside" logo on the cover page of this document indicates that it
contains colours which are considered to be useful for the correct understanding of its
contents. Users should therefore print this document using a colour printer.
IEC 63207:2022 © IEC 2022 – 5 –
INTRODUCTION
Nowadays, visual display terminals (VDTs) are everywhere in daily life, in devices such as TVs,
monitors, tablets and mobile phones. Most people will watch VDTs for a long time every day for
various reasons. However, there are three undesirable effects caused
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.