31.120 - Electronic display devices

IEC 62595-2-4:2020(E) specifies the electro-optical measuring methods of laser modules with multiple laser devices and an optical output for various displays and display lighting applications which require photometric and colorimetric measurements, covering the wavelength range of 380 nm to 780 nm. The module has multiple laser devices such as edge-emitting laser diodes (LDs), vertical cavity surface-emitting laser diodes (VCSELs), or photon up-conversion laser devices including second-harmonic ...view more

IEC 62715-6-3:2020 (E) is to define the standard test methods to evaluate the mechanical robustness of flexible display modules, especially mechanical robustness regarding impact and hardness, which include displays such as liquid crystal displays (LCDs), e-paper, and organic light emitting diode (OLED) displays, against external forces applied to a panel.

IEC 63211-3-5:2020(E) defines common procedures for surface durability mechanical test methods. This document generally describes the test equipment and procedures used for each method when applied on all levels, from parts (i.e. outermost surface parts of products, display panels and modules) to final products (i.e. finished displays or products).

IEC 62977-2-2:2020(E) specifies standard measurement conditions and measuring methods for determining the optical characteristics of electronic displays under indoor and outdoor illumination conditions. Standard illumination geometries are specified and the reflection properties of flat screens are determined under those conditions. Reference illumination levels and spectra are used to estimate the photometric and colorimetric characteristics of electronic displays under the same conditions. The...view more

IEC TR 62595-1-4:2020(E), which is a Technical Report, provides general information for judging the necessity of future standardization of glass light guide plates for display lighting units, which include backlight units for transmissive displays such as LCDs, and frontlight units for reflective displays.

IEC 63181-2:2020 specifies measuring methods for LCD multi-screen display terminals. To evaluate the characteristics of LCD multi-screen display terminals, the following measurement items are specified:
– gap (physical, optical): detailed splicing precision;
– splicing deviation: splicing accuracy of active areas of LCD splicing screen;
– installation deviation: the flatness of terminal surfaces in vertical and horizontal directions;
– luminance uniformity: luminance uniformity of adjacent L...view more

IEC TR 63211-2-12:2020(E) provides data and information on the environmental conditions when electronic displays are used, stored and transported.
This document covers the temperature, relative humidity and light of the environment of electronic displays.
The information provided by this document is related to the following electronic displays:  
indoor displays for consumer homes and offices, such as TVs or PC monitors,
indoor displays for commercial applications, such as signage and show ca...view more

IEC 63145-22-20:2020(E) specifies the standard measurement conditions and measuring methods for determining the see-through optical properties and imaging quality of augmented reality (AR) eyewear displays. This includes the transmission characteristics and ambient optical performance of the eyewear displays.
Contact lens type displays are out of the scope of this document.
NOTE The relationship between the scope and other documents (IEC 63145-20-10, IEC 63145-22-10) is shown in Annex A.

IEC TS 63181-1:2019 specifies a conceptual model for LCD multi-screen display terminals. This document defines typical functional components to compose LCD multi-screen display terminals and describes the terminals' structure and signal flow. The document also clarifies signal processing in the terminals to create multi-screen sub-signals from a single video signal input.

IEC 60601-2-22:2019 is available as IEC 60601-2-22:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60601-2-22:2019 applies to the Basic Safety and Essential Performance of laser equipment for surgical, therapeutic, medical diagnostic, cosmetic or veterinary applications, intended for use on humans or animals, classified as Laser Product of Class 1C where the Enclosed Laser is of Class 3B...view more

IEC 62341-5-3:2019 is available as IEC 62341-5-3:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62341-5-3:2019 specifies the standard measuring methods for determining the image sticking and lifetime of organic light emitting diode (OLED) display panels and modules, except finalized display products for end customers, such as TV sets, monitor sets and mobile phones. The measuring me...view more

IEC 62908-12-20:2019(E) specifies the standard measuring conditions and measurement methods for the multi-touch performance of a touch sensor module. This document is applicable to touch sensor modules, where the structural relationship between the touch sensor, touch controller, touch sensor module, display panel, touch display panel, and touch display module is defined in IEC 62908-1-2.

IEC 63145-20-20:2019 (E) specifies the standard measurement conditions and measurement methods for determining the image quality of eyewear displays. This document is applicable to non-see-through type (virtual reality “VR” goggle) and see-through type (augmented reality “AR” glasses) eyewear displays using virtual image optics.
Contact-lens type displays and retina direct projection displays are out of the scope of this document.

IEC 61747-30-3:2019(E) applies to transmissive type active matrix liquid crystal displays.
This document defines general procedures for quality evaluation related to the motion performance of transmissive thin film transistor (TFT) LCDs. It defines artefacts in the moving image and methods for motion artefact measurement.
NOTE Motion blur measurement methods and analysis methods introduced in this document are not universal tools for all the different LCD motion enhancement technologies due to...view more

IEC 63145-20-10:2019(E) specifies the standard measurement conditions and measurement methods for determining the optical properties of eyewear displays. This document applies to non-see-through type (virtual reality “VR” goggles) and see-through type (augmented reality “AR” glasses) eyewear displays using virtual image optics.
Contact lens-type displays and retina direct projection displays are out of the scope of this document.

IEC TS 62715-5-4:2019 (E) specifies the measuring conditions and measuring methods for determining the blur of objects when viewed through a flexible transparent display. This document mainly applies to flexible transparent display modules that have a constant radius curvature about a single axis. The display is measured in a static mechanical state.

IEC 61747-40-1:2019 is available as IEC 61747-40-1:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61747-40-1:2019 provides mechanical performance testing guidelines for cover glass used in electronic flat panel displays in mobile devices. This document focuses on key mechanical testing performance parameters and covers mainly strength and damage resistance attributes. The test methods ...view more

IEC TR 62595-1-3:2019 (E) focuses on common issues of light emission such as spatial uniformity of luminance and colour, and angular distribution of luminance and colour, from lighting units with arbitrary shapes like flexible lighting sources (FLSs). This document provides a model of light emission from a curved FLS and of light measurement on a curved FLS. Because the development of flexible liquid crystal panels is in progress (see the notes), the intent of this document is to provide guidanc...view more

IEC 62629-12-2:2019 specifies the measuring methods of motion artifacts for stereoscopic displays using glasses. This document is applicable to stereoscopic displays using glasses, which consist of transmissive type active matrix liquid crystal display modules (without a post image processing).

IEC 62148-21:2019 covers the design guide of the electrical interface for photonic integrated circuit (PIC) packages using silicon fine-pitch ball grid array (S-FBGA) and silicon fine-pitch land grid array (S-FLGA). In this document, the electrical interface for the S-FBGA package is informative. The purpose of this document is to specify adequately the electrical interface of PIC packages composed of optical transmitters and receivers that enable mechanical and electrical interchangeability of ...view more