EN 61386-1:2004
(Main)Conduit systems for cable management - Part 1: General requirements
Conduit systems for cable management - Part 1: General requirements
Specifies requirements and tests for conduit systems, including conduits and conduit fittings, for the protection and management of insulated conductors and/or cables in electrical installations or in communication systems up to 1 000 V a.c. and/or 1 500 V d.c.
Elektroinstallationsrohrsysteme für elektrische Energie und für Informationen - Teil 1: Allgemeine Anforderungen
Systèmes de conduits pour la gestion du câblage - Partie 1: Règles générales
La première partie de la CEI 1386 spécifie les règles et les essais applicables aux systèmes de conduits, incluant conduits et accessoires de conduits, pour la protection et le rangement des conducteurs et/ou des câbles isolés dans les installations électriques ou les systèmes de télécommunication jusqu'à 1 000 V c.a. et/ou 1 500 V c.c.
Sistemi kanalov za električne inštalacije – 1. del: Splošne zahteve (IEC 61386-1:1996 + A1:2000)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 61386-1:2004
STANDARD
september 2004
Sistemi kanalov za električne inštalacije – 1. del: Splošne zahteve (IEC 61386-
1:1996 + A1:2000)
Conduit systems for electrical installations - Part 1: General requirements (IEC
61386-1:1996 + A1:2000)
ICS 29.120.10 Referenčna številka
SIST EN 61386-1:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 61386-1
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2004
ICS 29.120.10 Supersedes EN 50086-1:1993
English version
Conduit systems for electrical installations
Part 1: General requirements
(IEC 61386-1:1996 + A1:2000)
Systèmes de conduits pour installations Elektroinstallationsrohrsysteme für
électriques elektrische Energie und für Informationen
Partie 1: Règles générales Teil 1: Allgemeine Anforderungen
(CEI 61386-1:1996 + A1:2000) (IEC 61386-1:1996 + A1:2000)
This European Standard was approved by CENELEC on 2003-09-23. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61386-1:2004 E
---------------------- Page: 2 ----------------------
EN 61386-1:2004 - 2 -
Foreword
The text of the International Standard IEC 61386-1:1996 + A1:2000, prepared by SC 23A, Cable
management systems, of IEC TC 23, Electrical accessories, was submitted to the Unique Acceptance
Procedure and was approved by CENELEC as EN 61386-1 on 2003-09-23.
This European Standard supersedes EN 50086-1:1993 + corrigendum February 2001.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2004-10-01
national standard or by endorsement
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) –
This part 1 of EN 61386 is to be used in conjunction with the appropriate part 2, which contains
clauses to supplement or modify the corresponding clauses in part 1, to provide the relevant particular
requirements for each type of product. A conduit system which conforms to this standard is deemed
safe for use.
In this standard, the following print types are used:
- requirements: in roman type;
- test specifications: in italic type;
- explanatory matter: in smaller roman type.
Annexes ZA and ZB have been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61386-1:1996 + A1:2000 was approved by CENELEC as a
European Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 61386-1:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60417 1973 Graphical symbols for use on equipment - HD 243 S12 1995
Index, survey and compilation of the
single sheets
IEC 60423 (mod) 1993 Conduits for electrical purposes - Outside EN 60423 1994
diameters of conduits for electrical
installations and threads for conduits and
fittings
IEC 60529 1989 Degrees of protection provided by EN 60529 1991
enclosures (IP Code) + corr. May 1993
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.