EN 50174-2:2009

Information technology - Cabling installation - Part 2: Installation planning and practices inside buildings

This European Standard specifies requirements for the following aspects of information technology cabling: a) planning; b) installation practice. This European Standard is applicable to all types of information technology cabling inside buildings (and may be applied to cabling that is defined as part of the building) including generic cabling systems designed in accordance with the EN 50173 series of standards. The requirements of Clauses 4, 5 and 6 of this standard are premises-independent unless amended by the requirements of premises-specific clauses. This European Standard: 1) details the considerations for satisfactory installation and operation of information technology cabling; 2) excludes specific requirements applicable to other cabling systems (e.g. mains power cabling); however, it takes account of the effects other cabling systems may have on the installation of information technology cabling (and vice versa) and gives general advice; 3) excludes those aspects of installation associated with the transmission of signals in free space between transmitters, receivers or their associated antenna systems (e.g. wireless, radio, microwave or satellite). This European Standard is intended for application within commercial and residential premises. This standard is applicable to certain hazardous environments but does not exclude additional requirements which are applicable in particular circumstances, defined by e.g. electricity supply and electrified railways.

Informationstechnik - Installation von Kommunikationsverkabelung - Teil 2: Installationsplanung und Installationspraktiken in Gebäuden

Diese Europäische Norm legt die Anforderungen an die folgenden Aspekte informationstechnischer Verkabelung fest: a) Planung; b) Installationspraktiken. Diese Europäische Norm gilt für alle Arten informationstechnischer Verkabelung innerhalb von Gebäuden (und kann auf Verkabelung angewendet werden, die als Teil des Gebäudes definiert ist), einschließlich anwendungsneutraler Verkabelungsanlagen, die nach der Normenreihe EN 50173 ausgelegt sind. Die in den Abschnitten 4, 5 und 6 dieser Norm gestellten Anforderungen sind, sofern sie nicht von den Anforderungen in den „gebäudespezifischen“ Abschnitten aufgehoben werden, gebäudeunabhängig. Diese Europäische Norm: 1) geht ausführlich auf Überlegungen bezüglich einer zufriedenstellenden Installation und eines zufrieden¬stellenden Betriebs von informationstechnischer Verkabelung ein; 2) schließt besondere Anforderungen aus, die bei anderen Verkabelungssystemen gelten (z. B. bei Stromversorgungsleitungen), berücksichtigt allerdings die Auswirkungen, die andere Verkabelung auf die Installation informationstechnischer Verkabelung (und umgekehrt) haben kann und gibt allgemeine Ratschläge; 3) schließt diejenigen Aspekte der Installation aus, die mit der Freiraumübertragung von Signalen zwischen Sendern, Empfängern oder deren zugehörigen Antennensystemen (z. B. drahtlos (Mobilfunk), Funk, Mikrowellen oder Satellit) im Zusammenhang stehen. Diese Europäische Norm ist zur Anwendung in gewerblichen Gebäuden und in Wohngebäuden vorgesehen. Diese Norm ist in bestimmten gefährlichen Umgebungen anwendbar, schließt jedoch keine zusätzlichen Anforderungen aus, die unter bestimmten Umständen gelten, z. B. bei Elektrizitätsversorgungsunternehmen und elektrifizierten Eisenbahnen.

Technologies de l'information - Installation de câblages - Partie 2: Planification et pratiques d'installation à l'intérieur des bâtiments

La présente Norme Européenne spécifie les exigences relatives aux aspects du câblage des technologies de l’information suivants: a) la planification; b) les pratiques en matière d’installation. La présente Norme Européenne s’applique à tous les types de câblage des technologies de l’information à l’intérieur des bâtiments (et il est admis qu’elle s’applique au câblage qui est défini comme partie du bâtiment), y compris les systèmes génériques de câblage conçus conformément à la série de normes EN 50173. Les exigences des Articles 4, 5 et 6 de la présente norme sont indépendantes des locaux, sauf si elles sont modifiées par les exigences contenues dans des articles spécifiques à ces locaux particuliers. La présente Norme Européenne: 1) analyse les points à observer pour une installation et une exploitation satisfaisante d’un câblage des technologies de l’information; 2) exclut les exigences particulières applicables à d’autres systèmes de câblage (par exemple, le câblage d’alimentation en énergie); cependant elle tient compte des effets que d’autres systèmes de câblage peuvent avoir sur l’installation du câblage dédié aux technologies de l’information (et vice versa) et donne des conseils appropriés; 3) exclut des aspects de l’installation liés à la transmission de signaux en espace libre entre émetteurs-récepteurs ou leurs systèmes d’antennes correspondants (par exemple les liaisons sans fil, radio, hyperfréquences ou satellite). La présente Norme Européenne est destinée à être mise en œuvre dans les locaux commerciaux et résidentiels. La présente norme s’applique à certains environnements à risque, mais n’exclut pas des exigences additionnelles applicables dans des circonstances particulières, définies par exemple par les autorités en charge de la distribution électrique et des chemins de fer électrifiés.

Informacijska tehnologija - Polaganje kablov - 2. del: Načrtovanje inštalacij in tehnike dela v stavbah

Ta evropski standard določa zahteve za naslednje vidike kablov za informacijsko tehnologijo: a) načrtovanje; b) tehnike dela pri polaganju. Ta evropski standard velja za vse vrste kablov za informacijsko tehnologijo v stavbah (in lahko velja za kable, ki so opredeljeni kot del stavbe), vključno z rodovnimi kabelskimi sistemi, narejenimi v skladu s serijo EN 50173. Zahteve klavzul 4, 5 in 6 tega standarda niso odvisne od prostorov, razen če jih spreminjajo zahteve klavzul, specifičnih za prostore.

General Information

• Status: Withdrawn
• Publication Date: 28-May-2009
• Withdrawal Date: 30-Apr-2012
• ICS: 35.110 - Networking
• ICS: 91.140.50 - Electricity supply systems
• Technical Committee: CLC/TC 215 - Electrotechnical aspects of telecommunication equipment
• Drafting Committee: ISO/IEC/JTC 1/SC25 - ISO/IEC_JTC_1/SC25
• Parallel Committee: ISOIEC/JTC 1/SC25 - ISOIEC_JTC_1/SC25
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 21-May-2021
• Completion Date: 21-May-2021
• Ref Project: SIST EN 50174-2:2009 - Information technology - Cabling installation -- Part 2: Installation planning and practices inside buildings

Relations

• Replaces: EN 50174-2:2000 - Information technology - Cabling installation - Part 2: Installation planning and practices inside buildings
• Effective Date: 29-Jan-2023
• Replaced By: EN 50174-2:2018 - Information technology - Cabling installation - Part 2: Installation planning and practices inside buildings
• Effective Date: 28-Jan-2023
• Amended By: EN 50174-2:2009/A2:2014 - Information technology - Cabling installation - Part 2: Installation planning and practices inside buildings
• Effective Date: 29-Jan-2023
• Amended By: EN 50174-2:2009/A1:2011 - Information technology - Cabling installation - Part 2: Installation planning and practices inside buildings
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50174-2:2009
01-oktober-2009
1DGRPHãþD
SIST EN 50174-2:2001
,QIRUPDFLMVNDWHKQRORJLMD3RODJDQMHNDEORYGHO1DþUWRYDQMHLQãWDODFLMLQ
WHKQLNHGHODYVWDYEDK
Information technology - Cabling installation -- Part 2: Installation planning and practices
inside buildings
Informationstechnik - Installation von Kommunikationsverkabelung -- Teil 2:
Installationsplanung und Installationspraktiken in Gebäuden
Technologies de l'information - Installation de câblages -- Partie 2: Planification et
pratiques d'installation à l'intérieur des bâtiments
Ta slovenski standard je istoveten z: EN 50174-2:2009
ICS:
33.040.50 Vodi, zveze in tokokrogi Lines, connections and
circuits
35.110 Omreževanje Networking
SIST EN 50174-2:2009 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50174-2:2009

---------------------- Page: 2 ----------------------

SIST EN 50174-2:2009

EUROPEAN STANDARD
EN 50174-2

NORME EUROPÉENNE
May 2009
EUROPÄISCHE NORM

ICS 35.110; 91.140.50 Supersedes EN 50174-2:2000


English version


Information technology -
Cabling installation -
Part 2: Installation planning and practices inside buildings



Technologies de l'information -  Informationstechnik -
Installation de câblages - Installation
Partie 2: Planification et pratiques von Kommunikationsverkabelung -
d'installation à l'intérieur des bâtiments Teil 2: Installationsplanung
und Installationspraktiken in Gebäuden





This European Standard was approved by CENELEC on 2009-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50174-2:2009 E

---------------------- Page: 3 ----------------------

SIST EN 50174-2:2009
EN 50174-2:2009 – 2 –
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 215, Electrotechnical
aspects of telecommunication equipment.
The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50174-2 on
2009-05-01.
This European Standard supersedes EN 50174-2:2000.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-05-01
EN 50174 comprises three parts. All three parts support the specification, implementation and operation of
information technology cabling. There are specific requirements for cabling systems that are in accordance
with the design requirements of the EN 50173 series. However, the three parts also apply to cabling systems
of any design including those in accordance with standards such as EN 50098-1 or EN 50098-2.
This part, EN 50174-2, is concerned with the planning and installation of information technology cabling
using metallic cabling and optical fibre cabling inside buildings. It provides guidance as to the responsibilities
of those involved and is intended to be referenced in relevant contracts.
Additional clauses containing normative requirements for specific types of premises will be added as
amendments, or as revisions, to this standard. At the time of publication of this European Standard, the
following clauses are planned:
– homes;
– data centres;
– operator buildings.
It does not cover those aspects of installation associated with the transmission of signals in free space
between transmitters, receivers or their associated antenna system
...