EN 60811-411:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds

IEC 60811-411:2012 gives the procedure to evaluate lower temperature brittleness which typically applies to filling compounds used for communication and optical fibre cables. IEC 60811-411:2012 cancels and replaces Clause 6 of IEC 60811-5-1:1990, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012. This publication is to be read in conjunction with IEC 60811-100:2012.

Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene Werkstoffe - Teil 411: Sonstige Prüfungen - Kälterissbeständigkeit von Füllmassen

Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 411: Essais divers - Fragilité à basse température des matières de remplissage

La CEI 60811-411:2012 donne la méthode pour évaluer la fragilité à basse température, qui s'applique généralement aux matières de remplissage utilisées pour les câbles de communication et à fibres optiques. La CEI 60811-411:2012 annule et remplace l'Article 6 de la CEI 60811-5-1:1990, qui est supprimée. L'ensemble des informations relatives aux remplacements figure dans l'Annexe A de la CEI 60811-100:2012. Aucune modification technique n'a été effectuée par rapport à l'édition précédente; voir cependant l'avant-propos de la CEI 60811-100:2012. Cette publication doit être lue conjointement avec la CEI 60811-100:2012.

Električni in optični kabli - Preskuševalne metode za nekovinske materiale - 411. del: Drugi preskusi - Krhkost polnilnih zmesi pri nizkih temperaturah

411. del standarda IEC 60811 navaja postopek za vrednotenje krhkosti pri nizkih temperaturah, ki se običajno uporablja za polnilne zmesi za komunikacijske kable in kable z optičnimi vlakni.

General Information

• Status: Published
• Publication Date: 14-Jun-2012
• ICS: 29.035.01 - Insulating materials in general
• ICS: 29.060.20 - Cables
• Technical Committee: CLC/TC 20 - Electric cables
• Drafting Committee: IEC/TC 20 - IEC_TC_20
• Parallel Committee: IEC/TC 20 - IEC_TC_20
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 15-Jun-2012
• Completion Date: 15-Jun-2012
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 60811-411:2012 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low temperature brittleness of filling compounds

Relations

• Replaces: EN 60811-5-1:1999 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C
• Effective Date: 29-Jan-2023
• Replaces: EN 60811-5-1:1999/A1:2004 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C
• Effective Date: 29-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.XUDKKabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene Werkstoffe - Teil 411: Sonstige Prüfungen - Kälterissbeständigkeit von FüllmassenCâbles électriques et câbles à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 411: Essais divers - Fragilité à basse température des matières de remplissageElectric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low temperature brittleness of filling compounds29.060.20KabliCables29.035.01Izolacijski materiali na splošnoInsulating materials in generalICS:Ta slovenski standard je istoveten z:EN 60811-411:2012SIST EN 60811-411:2012en,fr,de01-september-2012SIST EN 60811-411:2012SLOVENSKI
STANDARD



SIST EN 60811-411:2012



EUROPEAN STANDARD EN 60811-411 NORME EUROPÉENNE
EUROPÄISCHE NORM June 2012
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60811-411:2012 E
ICS 29.035.01; 29.060.20 Supersedes EN 60811-5-1:1999 (partially) + A1:2004 (partially)
English version
Electric and optical fibre cables -
Test methods for non-metallic materials -
Part 411: Miscellaneous tests -
Low-temperature brittleness of filling compounds (IEC 60811-411:2012)
Câbles électriques et à fibres optiques -
Méthodes d'essai pour les matériaux non-métalliques -
Partie 411: Essais divers -
Fragilité à basse température des matières de remplissage (CEI 60811-411:2012)
Kabel, isolierte Leitungen und Glasfaserkabel -
Prüfverfahren für nichtmetallene Werkstoffe -
Teil 411: Sonstige Prüfungen -
Kälterissbeständigkeit von Füllmassen (IEC 60811-411:2012)
This European Standard was approved by CENELEC on 2012-04-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 60811-411:2012



EN 60811-411:2012 - 2 -
Foreword The text of document 20/1295/FDIS, future edition 1 of IEC 60811-411, prepared by IEC/TC 20 "Electric cables" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60811-411:2012.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-01-16 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-04-16
This document supersedes Clause 6 of EN 60811-5-1:1999 + A1:2004 (partially). Full details of the replacements are shown in Annex A of EN 60811-100:2012. There are no technical changes with respect to EN 60811-5-1:1999 + A1:2004, but see the Foreword to EN 60811-100:2012. This standard is to be read in conjunction with EN 60811-100.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 60811-411:2012 was approved by CENELEC as a European Standard without any modification.
SIST EN 60811-411:2012



- 3 - EN 60811-411:2012
Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) a
...