EN 60086-2:2011

Primary batteries - Part 2: Physical and electrical specifications

IEC 60086-2:2011 is applicable to primary batteries based on standardized electrochemical systems. It specifies the physical dimensions; and the discharge test conditions and discharge performance requirements. Significant changes from the previous edition are the deletion of eight battery types from this standard, the addition of an air hole placement diagram and deletion of the resistive hearing aid tests for the P-system (zinc air) hearing aid batteries, standardization of a new form of alkaline (L-system) 9 volt battery (6LP3146), addition of a common designation reference as Annex D and general adjustment of application tests and their minimum average duration values to reflect changes in battery usage.

Primärbatterien - Teil 2: Physikalische und elektrische Spezifikationen

Piles électriques - Partie 2: Spécifications physiques et électriques

La CEI 60086-2:2011 est applicable aux piles électriques fonctionnant avec des systèmes électrochimiques normalisés. Elle spécifie les dimensions physiques; et les conditions d'essai de décharge et les spécifications de performance de décharge. Les modifications significatives par rapport à l'édition précédente sont la suppression de huit types de piles de la présente norme, l'ajout d'un schéma de placement d'évents et la suppression des essais résistifs pour les prothèses auditives relatifs aux piles de prothèse auditive du système P (zinc air), la normalisation d'une nouvelle forme de pile alcaline (système L) de neuf volts (6LP3146), l'ajout d'une référence de désignation commune sous forme d'Annexe D et l'adaptation globale des essais d'application et de leurs valeurs minimales de durée moyenne pour refléter les changements relatifs à l'utilisation des piles.

Primarne baterije - 2. del: Fizikalne in električne specifikacije (IEC 60086-2:2011)

Ta del IEC 60086 velja za primarne baterije, ki temeljijo na standardiziranih elektrokemijskih sistemih.
Določa
− fizične mere;
− preskusne pogoje za praznjenje in zahteve za učinkovitost praznjenja.

General Information

• Status: Withdrawn
• Publication Date: 24-Mar-2011
• Withdrawal Date: 23-Mar-2014
• ICS: 29.220.10 - Primary cells and batteries
• Technical Committee: CLC/SR 35 - Primary batteries
• Drafting Committee: IEC/TC 35 - IEC_TC_35
• Parallel Committee: IEC/TC 35 - IEC_TC_35
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 03-Dec-2018
• Completion Date: 03-Dec-2018
• Ref Project: SIST EN 60086-2:2011 - Primary batteries - Part 2: Physical and electrical specifications (IEC 60086-2:2011)

Relations

• Replaces: EN 60086-2:2007 - Primary batteries - Part 2: Physical and electrical specifications
• Effective Date: 28-Jan-2023
• Replaced By: EN 60086-2:2016 - Primary batteries - Part 2: Physical and electrical specifications
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60086-2:2011
01-maj-2011
1DGRPHãþD
SIST EN 60086-2:2007
3ULPDUQHEDWHULMHGHO)L]LNDOQHLQHOHNWULþQHVSHFLILNDFLMH,(&
Primary batteries - Part 2: Physical and electrical specifications (IEC 60086-2:2011)
Primärbatterien - Teil 2: Physikalische und elektrische Spezifikationen (IEC 60086-
2:2011)
Piles primaires - Partie 2: Spécifications physiques et électriques (CEI 60086-2:2011)
Ta slovenski standard je istoveten z: EN 60086-2:2011
ICS:
29.220.10 3ULPDUQLþOHQLLQEDWHULMH Primary cells and batteries
SIST EN 60086-2:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60086-2:2011

---------------------- Page: 2 ----------------------

SIST EN 60086-2:2011

EUROPEAN STANDARD
EN 60086-2

NORME EUROPÉENNE
March 2011
EUROPÄISCHE NORM

ICS 29.220.10 Supersedes EN 60086-2:2007


English version


Primary batteries -
Part 2: Physical and electrical specifications
(IEC 60086-2:2011)


Piles primaires -  Primärbatterien -
Partie 2: Spécifications physiques et Teil 2: Physikalische und elektrische
électriques Spezifikationen
(CEI 60086-2:2011) (IEC 60086-2:2011)




This European Standard was approved by CENELEC on 2011-03-24. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60086-2:2011 E

---------------------- Page: 3 ----------------------

SIST EN 60086-2:2011
EN 60086-2:2011 - 2 -
Foreword
The text of document 35/1271/CDV, future edition 12 of IEC 60086-2, prepared by IEC TC 35, Primary
cells and batteries, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60086-2 on 2011-03-24.
This European Standard supersedes EN 60086-2:2007.
Significant changes from EN 60086-2:2007 are the deletion of eight battery types from this standard, the
addition of an air hole placement diagram and deletion of the resistive hearing aid tests for the P-system
(zinc air) hearing aid batteries, standardization of a new form of alkaline (L-system) 9 volt battery
(6LP3146), addition of a common designation reference as Annex D and general adjustment of
application tests and their minimum average duration values to reflect changes in battery usage.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-12-24
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2014-03-24
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60086-2:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60086-3 NOTE  Harmonized as EN 60086-3.
IEC 60086-4 NOTE  Harmonized as EN 60086-4.
IEC 60086-5 NOTE  Harmonized as EN 60086-5.
IEC 62281 NOTE  Harmonized as EN 62281.
__________

---------------------- Page: 4 ----------------------

SIST EN 60086-2:2011
- 3 - EN 60086-2:2011

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensabl
...