EN 61189-6:2006

Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in manufacturing electronic assemblies

IEC 61189-6:2006 is a catalogue of test methods representing methodologies and procedures that can be applied to materials used in manufacturing electronic assemblies.

Prüfverfahren für Elektromaterialien, Verbindungsstrukturen und Baugruppen - Teil 6: Prüfverfahren für Materialien, die bei der Herstellung elektronischer Baugruppen eingesetzt werden

Méthodes d'essais pour les matériaux électriques, les structures d'interconnexion et les ensembles - Partie 6: Méthodes d'essais pour les matériaux utilisés dans la fabrication des assemblages électroniques

La CEI 61189-6:2006 est un catalogue de méthodes d'essai représentant les méthodologies et modes opératoires applicables aux matériaux utilisés dans la fabrication des assemblages électroniques.

Preskusne metode za električne materiale, tiskane plošče, povezovalne strukture in sestave – 6. del: Preskusne metode za materiale pri izdelavi elektronskih sestavov (IEC 61189-6:2006)

General Information

• Status: Published
• Publication Date: 17-Aug-2006
• Withdrawal Date: 31-Jul-2009
• ICS: 31.180 - Printed circuits and boards
• Technical Committee: CLC/SR 91 - Electronics assembly technology
• Drafting Committee: IEC/TC 91 - IEC_TC_91
• Parallel Committee: IEC/TC 91 - IEC_TC_91
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 18-Aug-2006
• Completion Date: 18-Aug-2006
• Ref Project: SIST EN 61189-6:2006 - Test methods for electrical materials, interconnection structures and assemblies -- Part 6: Test methods for materials used in manufacturing electronic assemblies

Standards Content (Sample)

6/29(16., 6,67(1

67$1'$5'
GHFHPEHU
3UHVNXVQHPHWRGH]DHOHNWULþQHPDWHULDOHWLVNDQHSORãþHSRYH]RYDOQH
VWUXNWXUHLQVHVWDYH±GHO3UHVNXVQHPHWRGH]DPDWHULDOHSULL]GHODYL
HOHNWURQVNLKVHVWDYRY,(&
7HVWPHWKRGVIRUHOHFWULFDOPDWHULDOVLQWHUFRQQHFWLRQVWUXFWXUHVDQGDVVHPEOLHV
3DUW7HVWPHWKRGVIRUPDWHULDOVXVHGLQPDQXIDFWXULQJHOHFWURQLFDVVHPEOLHV
,(&
,&6 5HIHUHQþQDãWHYLOND

6,67(1HQ
!"#$%&’( )&!*+,%- .

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61189-6

NORME EUROPÉENNE
August 2006
EUROPÄISCHE NORM

ICS 31.180


English version


Test methods for electrical materials,
interconnection structures and assemblies
Part 6: Test methods for materials used in
manufacturing electronic assemblies
(IEC 61189-6:2006)


Méthodes d'essais pour les matériaux Prüfverfahren für Elektromaterialien,
électriques, les structures Verbindungsstrukturen und Baugruppen
d'interconnexion et les ensembles Teil 6: Prüfverfahren für Materialien,
Partie 6: Méthodes d'essais pour die bei der Herstellung elektronischer
les matériaux utilisés dans la fabrication
Baugruppen eingesetzt werden
des assemblages électroniques (IEC 61189-6:2006)
(CEI 61189-6:2006)




This European Standard was approved by CENELEC on 2006-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61189-6:2006 E

---------------------- Page: 2 ----------------------

EN 61189-6:2006 - 2 -
Foreword
The text of document 91/593/FDIS, future edition 1 of IEC 61189-6, prepared by IEC TC 91, Electronics
assembly technology, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as EN 61189-6 on 2006-08-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61189-6:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61189-6:2006

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1)
IEC 60068-1 1988 Environmental testing EN 60068-1 1994
Part 1: General and guidance


2) 3)
IEC 61189-1 - Test methods for electrical materials, EN 61189-1 1997
interconnection structures and assemblies
Part 1: General test methods and
methodology


2) 3)
IEC 61190-1-1 - Attachment materials for electronic assembly EN 61190-1-1 2002
Part 1-1: Requirements for soldering fluxes
for high-quality interconnections in electronics
assembly


2) 3)
IEC 61190-1-3 - Attachment materials for electronic assembly EN 61190-1-3 2002
Part 1-3: Requirements for electronic grade
solder alloys and fluxed and non-fluxed solid
solders for electronic soldering applications


2) 3)
ISO 9
...