EN 45544-4:2016

Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance

This European Standard gives guidance on the selection, installation, use and maintenance of electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours in workplace atmospheres. The primary purpose of such apparatus is to measure the concentration of a toxic gas or vapour in order to provide an exposure measurement and/or detection and warning of its presence. This European Standard is applicable to apparatus whose primary purpose is to provide an indication, alarm and/or other output function to give a warning of the presence of a toxic gas or vapour in the atmosphere and in some cases to initiate automatic or manual protective actions. It is applicable to apparatus in which the sensor automatically generates an electrical signal when gas is present. This European Standard is not applicable, but may provide useful information, for apparatus — used for the measurement of oxygen, — used only in laboratories for analysis or measurement, — used only for process measurement purposes, — used in car parks or tunnels (fixed apparatus only), — used in the domestic environment, — used in environmental air pollution monitoring, — used for the measurement of combustible gases and vapours related to the risk of explosion. It also does not apply to open-path (line of sight) area monitors. For apparatus used for sensing the presence of multiple gases, this European Standard applies only to the detection of toxic gas or vapour.

Arbeitsplatzatmosphäre - Elektrische Geräte für die direkte Detektion und direkte Konzentrationsmessung toxischer Gase und Dämpfe - Teil 4: Leitfaden für Auswahl, Installation, Einsatz und Wartung

Atmosphères des lieux de travail - Appareillage électrique utilisé pour la détection directe des vapeurs et gaz toxiques et le mesurage direct de leur concentration - Partie 4: Guide de sélection, d'installation, d’utilisation et d’entretien

Zrak na delovnem mestu - Električne naprave za neposredno odkrivanje in neposredno merjenje koncentracije strupenih plinov in hlapov - 4. del: Vodilo za izbiro, vgraditev, uporabo in vzdrževanje

Ta evropski standard vključuje navodila za izbiro, namestitev, uporabo in vzdrževanje električnih
naprav, ki se uporabljajo za neposredno odkrivanje in neposredno merjenje koncentracije strupenih plinov in hlapov v ozračju na delovnem mestu. Primarni namen takšnih naprav je izmeriti koncentracijo strupenih plinov ali hlapov, ki omogoča merjenje izpostavljenosti in/ali zaznavanje ter opozarjanje na njihovo prisotnost.
Ta evropski standard se uporablja za naprave, katerih primarni namen je izdati opozorilo, alarm in/ali drugo izhodno funkcijo, s katero se opozori na prisotnost strupenih plinov ali hlapov v ozračju in v nekaterih primerih tudi sproži samodejne ali ročne zaščitne ukrepe. Uporablja se za aparate, v katerih senzor ob prisotnosti plina samodejno ustvari električni signal.
Čeprav se ta evropski standard ne uporablja zanje, je vseeno lahko vir uporabnih informacij za naprave,
– ki se uporabljajo za merjenje kisika,
– ki se uporabljajo le v laboratorijih za analize ali merjenje,
– ki se uporabljajo samo za namene merilnega postopka,
– ki se uporabljajo v voznih parkih ali predorih (le nepremične naprave),
– ki se uporabljajo v domačem okolju,
– ki se uporabljajo pri nadzoru onesnaženja zraka v okolju,
– ki se uporabljajo za merjenje plinov in hlapov pri izgorevanju v zvezi z nevarnostjo eksplozije.
Prav tako se ne uporablja za senzorje z odprto merilno potjo (linija pogleda).
Pri napravah, ki se uporabljajo za zaznavanje prisotnosti več plinov, se ta evropski standard uporablja le za zaznavanje strupenih plinov ali hlapov.

General Information

• Status: Withdrawn
• Publication Date: 17-Mar-2016
• Withdrawal Date: 24-Jan-2019
• ICS: 13.040.30 - Workplace atmospheres
• ICS: 13.320 - Alarm and warning systems
• Technical Committee: CEN/CLC/JWG CMI - CEN/CENELEC Joint Working Group Continuous Measuring Instruments
• Drafting Committee: CEN/CLC/JWG CMI - CEN/CENELEC Joint Working Group Continuous Measuring Instruments
• Ref Project: SIST EN 45544-4:2016 - Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance

Relations

• Replaces: EN 45544-4:1999 - Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance
• Effective Date: 28-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Arbeitsplatzatmosphäre - Elektrische Geräte für die direkte Detektion und direkte Konzentrationsmessung toxischer Gase und Dämpfe - Teil 4: Leitfaden für Auswahl, Installation, Einsatz und InstandhaltungAtmosphères des lieux de travail - Appareillage électrique utilisé pour la détection directe des vapeurs et gaz toxiques et le mesurage direct de leur concentration - Partie 4: Guide de sélection, d'installation, d’utilisation et d’entretienWorkplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance13.320Alarmni in opozorilni sistemiAlarm and warning systems13.040.30Kakovost zraka na delovnem mestuWorkplace atmospheresICS:Ta slovenski standard je istoveten z:EN 45544-4:2016SIST EN 45544-4:2016en,de01-junij-2016SIST EN 45544-4:2016SLOVENSKI
STANDARDSIST EN 45544-4:20021DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 45544-4
March 2016 ICS 13.040.30; 13.320
Supersedes
EN 45544-4:1999
English Version
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance
Atmosphères des lieux de travail - Appareillage électrique utilisé pour la détection directe des vapeurs et gaz toxiques et le mesurage direct de leur concentration - Partie 4: Guide de sélection, d'installation, d'utilisation et d'entretien
Arbeitsplatzatmosphäre - Elektrische Geräte für die direkte Detektion und direkte Konzentrationsmessung toxischer Gase und Dämpfe - Teil 4: Leitfaden für Auswahl, Installation, Einsatz und Wartung This European Standard was approved by CENELEC on 25 January 2016. CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2016 CEN/CENELEC All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for CENELEC Members.
Ref. No. EN 45544-4:2016 E SIST EN 45544-4:2016

Commonly used measurement principles. 34 A.1 General . 34 A.2 Chemiluminescence . 34 A.3 Colorimetry . 35 A.4 Electrochemical . 36 A.5 Flame-ionization . 37 A.6 Gas chromatography . 38 A.7 Infrared photometry . 39 A.8 Ion mobility spectrometry . 40 A.9 Mass spectrometry . 41 A.10 Photo-ionization . 42 A.11 Semiconductor . 43 A.12 Ultra-violet visible photometry . 44 Annex B (informative) Table of significant changes in comparison to EN 45544-4:1999 . 45 Bibliography . 47
(dow) 2019-01-25 This document supersedes EN 45544-4:1999. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. SIST EN 45544-4:2016
...