EN 60052:2002
(Main)Voltage measurement by means of standard air gaps
Voltage measurement by means of standard air gaps
Applies to the construction and use of sphere-gaps for measuring the peak value of alternating, direct and both full standard and longer tail impulse voltages. Peak values of the disruptive voltages in air are given in tabular form. Note: - For high-voltage test techniques, see EN 60.
Spannungsmessungen mit Standard-Luftfunkenstrecken
Mesure de tension au moyen des éclateurs à sphères normalisés
Concerne la construction et l'utilisation d'éclateurs à sphères pour la mesure des valeurs de crête des tensions alternatives, des tensions continues et des tensions de choc pleines normales ainsi que des tensions de choc de plus grande durée de queue. Les valeurs de crête des tensions disruptives dans l'air sont données sous forme de tableaux. Note: - Pour les techniques des essais à haute tension voir la EN 60.
Voltage measurement by means of standard air gaps (IEC 60052:2002)
General Information
Standards Content (Sample)
SLOVENSKI SIST EN 60052:2004
STANDARD
april 2004
Voltage measurement by means of standard air gaps (IEC 60052:2002)
ICS 19.080 Referenčna številka
SIST EN 60052:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60052
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2002
ICS 19.080
English version
Voltage measurement by means of standard air gaps
(IEC 60052:2002)
Mesure de tension au moyen Spannungsmessungen mit
des éclateurs à sphères normalisés Standard-Luftfunkenstrecken
(CEI 60052:2002) (IEC 60052:2002)
This European Standard was approved by CENELEC on 2002-11-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60052:2002 E
---------------------- Page: 2 ----------------------
EN 60052:2002 - 2 -
Foreword
The text of document 42/173/FDIS, future edition 3 of IEC 60052, prepared by IEC TC 42, High-voltage
testing techniques, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as EN 60052 on 2002-11-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-11-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annex ZA is normative and annex A to D are informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60052:2002 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 60052:2002
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of these publications apply to this European
Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the
publication referred to applies (including amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60060-1 1989 High-voltage test techniques
+ corr. March 1990 Part 1: General definitions and test HD 588.1 S1 1991
requirements
IEC 60060-2 1994 Part 2: Measuring systems EN 60060-2 1994
A11 1998
---------------------- Page: 4 ----------------------
NORME CEI
INTERNATIONALE IEC
60052
INTERNATIONAL
Troisième édition
STANDARD
Third edition
2002-10
Mesure de tension au moyen des éclateurs
à sphères normalisés
Voltage measurement by means of
standard air gaps
© IEC 2002 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.