EN 60060-3:2006

High voltage test techniques - Part 3: Definitions and requirements for on-site tests

Applicable to the following on-site test voltages and in service stresses, which are in relation to IEC 60060-1: direct voltage;alternating voltage; lightning impulse voltage of aperiodic or oscillating shape: switching impulse voltage of aperiodic or oscillating shape.

Hochspannungs-Prüftechnik - Teil 3: Begriffe und Anforderungen für Vor-Ort-Prüfungen

Techniques des essais à haute tension - Partie 3: Définitions et prescriptions pour des essais sur site

Visokonapetostne preskusne tehnike – 3. del: Definicije in zahteve za preskušanje na kraju samem (IEC 60060-3:2006)

General Information

• Status: Published
• Publication Date: 09-Mar-2006
• Withdrawal Date: 31-Jan-2009
• ICS: 17.220.20 - Measurement of electrical and magnetic quantities
• ICS: 19.080 - Electrical and electronic testing
• Technical Committee: CLC/SR 42 - High-voltage testing techniques
• Drafting Committee: IEC/TC 42 - IEC_TC_42
• Parallel Committee: IEC/TC 42 - IEC_TC_42
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 10-Mar-2006
• Completion Date: 10-Mar-2006
• Ref Project: SIST EN 60060-3:2006 - High voltage test techniques -- Part 3: Definitions and requirements for on-site tests

Standards Content (Sample)

SLOVENSKI SIST EN 60060-3:2006

STANDARD
julij 2006
Visokonapetostne preskusne tehnike – 3. del: Definicije in zahteve za
preskušanje na kraju samem (IEC 60060-3:2006)
High voltage test techniques – Part 3: Definitions and requirements for on-site tests
(IEC 60060-3:2006)
ICS 19.080 Referenčna številka
SIST EN 60060-3:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60060-3

NORME EUROPÉENNE
March 2006
EUROPÄISCHE NORM

ICS 17.220.20; 19.080


English version


High voltage test techniques
Part 3: Definitions and requirements for on-site tests
(IEC 60060-3:2006)


Techniques des essais à haute tension Hochspannungs-Prüftechnik
Partie 3: Définitions et prescriptions Teil 3: Begriffe und Anforderungen
pour des essais sur site für Vor-Ort-Prüfungen
(CEI 60060-3:2006) (IEC 60060-3:2006)




This European Standard was approved by CENELEC on 2006-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60060-3:2006 E

---------------------- Page: 2 ----------------------

EN 60060-3:2006 - 2 -
Foreword
The text of document 42/203/FDIS, future edition 1 of IEC 60060-3, prepared by IEC TC 42, High-voltage
testing techniques, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60060-3 on 2006-02-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-02-01
This European Standard makes reference to International Standards. Where the International Standard
referred to has been endorsed as a European Standard or a home-grown European Standard exists, this
European Standard shall be applied instead. Pertinent information can be found on the CENELEC web
site.
__________
Endorsement notice
The text of the International Standard IEC 60060-3:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

INTERNATIONAL IEC


STANDARD 60060-3





First edition
2006-02


High-voltage test techniques –
Part 3:
Definitions and requirements
for on-site testing

 IEC 2006  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale V
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

---------------------- Page: 4 ----------------------

– 2 – 60060-3  IEC:2006(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
2 Normative references .
...