EN 60264-5-2:2001

Packaging of winding wires - Part 5-2: Cylindrical barrelled delivery spools with conical flanges - Specification for returnable spools made from thermoplastic material

Specifies the requirements for returnable cylindrical barrelled delivery spools with conical flanges made from thermoplastic material.

Verpackung von Wickeldrähten - Teil 5-2: Lieferspulen mit zylindrischem Kern und konischen Flanschen - Spezifikation für Mehrweg-Lieferspulen aus thermoplastischem Werkstoff

Conditionnement des fils de bobinage - Partie 5-2: Bobines de livraison à fût de forme cylindrique avec les joues coniques - Spécification pour les bobines réutilisables, faites de matériau thermoplastique

Définit les exigences pour les bobines de livraison à fût de forme cylindrique avec les joues coniques réutilisables, faites de matériau thermoplastique.

Packaging of winding wires – Part 5–2: Cylindrical barrelled delivery spools with conical flanges – Specification for returnable spools made from thermoplastic material

General Information

• Status: Published
• Publication Date: 09-Jul-2001
• Withdrawal Date: 31-May-2004
• ICS: 29.060.10 - Wires
• ICS: 55.060 - Spools. Bobbins
• Technical Committee: CLC/TC 55 - Winding wires
• Drafting Committee: IEC/TC 55 - IEC_TC_55
• Parallel Committee: IEC/TC 55 - IEC_TC_55
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 10-Jul-2001
• Completion Date: 10-Jul-2001
• Ref Project: SIST EN 60264-5-2:2002 - Packaging of winding wires -- Part 5-2: Cylindrical barrelled delivery spools with conical flanges - Specification for returnable spools made from thermoplastic material

Overview

EN 60264-5-2:2001 (IEC 60264-5-2) is the European/CENELEC specification for returnable cylindrical barrelled delivery spools with conical flanges made from thermoplastic material. It forms part of the EN/IEC 60264 series on the packaging of winding wires and defines material, marking, dimensional, mechanical and performance requirements for reusable thermoplastic spools used to deliver insulated winding wire.

Key topics and technical requirements

• Scope and material: Specifies returnable delivery spools manufactured from thermoplastic materials (example: modified polystyrene). Materials must not adversely affect conductor insulation.
• Type designation and marking: Spools must be marked (embossed/engraved) on the top flange with the type designation (e.g., IEC 200/60264-5-2), manufacturer/trademark, year of manufacture and nominal mass (g). Top flange design must allow application of shipping/identification labels.
• Mass and dimensions: Nominal mass values and tolerances are specified for typical spool types (e.g., 100, 125, 160, 200, 250); dimensions and tolerances reference IEC 60264-5-1 (basic dimensions).
• Surface and construction: Surfaces must be smooth; flanges free from protrusions that could damage wire or injure operators. Fasteners (if used) must be countersunk.
• Running and dimensional stability: True-running deviation limits reference IEC 60264-5-1. Spools must withstand elevated temperature conditioning (60 ± 3 °C) with no swelling, buckling or flange/barrel variation.
• Mechanical performance tests:
  • Impact tests at ambient and low temperatures (specified energies per spool type, with reduced values at -10 to -12 °C and -25 ± 3 °C).
  • Tensile deformation after stressing: specified tensile loads and maximum elongation limits.
  • Flexibility (flange) tests: minimum loads at specified deflection percentages (4%, 8%, 14%).
• Test methods: Reference to IEC 60264-4-1 for test procedures.

Applications and users

• Relevant to wire and cable manufacturers, coil winders, motor and transformer manufacturers, packaging engineers, and supply chain/quality teams who specify or procure reusable delivery spools for insulated winding wire.
• Helps ensure safe handling, repeatable winding operations, consistent wire pay-off, and longer service life of returnable spools-reducing packaging waste and logistics costs.

Related standards

• IEC/EN 60264-5-1 - Basic dimensions for cylindrical barrelled delivery spools with conical flanges.
• IEC 60264-4-1 - Methods of test for delivery spools made from thermoplastic materials.
• EN 60264 series - Packaging of winding wires.

Keywords: EN 60264-5-2, IEC 60264-5-2, packaging of winding wires, returnable spools, thermoplastic spools, cylindrical barrelled delivery spools, conical flanges, spool marking, spool impact test.

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2002
Packaging of winding wires – Part 5–2: Cylindrical barrelled delivery spools with
conical flanges – Specification for returnable spools made from thermoplastic
material
Packaging of winding wires -- Part 5-2: Cylindrical barrelled delivery spools with conical
flanges - Specification for returnable spools made from thermoplastic material
Verpackung von Wickeldrähten -- Teil 5-2: Lieferspulen mit zylindrischem Kern und
konischen Flanschen - Spezifikation für Mehrweg-Lieferspulen aus thermoplastischem
Werkstoff
Conditionnement des fils de bobinage -- Partie 5-2: Bobines de livraison à fût de forme
cylindrique avec les joues coniques - Spécification pour les bobines réutilisables, faites
de matériau thermoplastique
Ta slovenski standard je istoveten z: EN 60264-5-2:2001
ICS:
29.060.10 Žice Wires
55.060 Tulci. Vretena Spools. Bobbins
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60264-5-2
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2001
ICS 29.060.10; 55.060
English version
Packaging of winding wires
Part 5-2: Cylindrical barrelled delivery spools with conical flanges -
Specification for returnable spools made from thermoplastic material
(IEC 60264-5-2:2001)
Conditionnement des fils de bobinage Verpackung von Wickeldrähten
Partie 5-2: Bobines de livraison à fût de Teil 5-2: Lieferspulen mit zylindrischem
forme cylindrique avec les joues coniques - Kern und konischen Flanschen -
Spécification pour les bobines réutilisables, Spezifikation für Mehrweg-Lieferspulen
faites de matériau thermoplastique aus thermoplastischem Werkstoff
(CEI 60264-5-2:2001) (IEC 60264-5-2:2001)
This European Standard was approved by CENELEC on 2001-06-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60264-5-2:2001 E
Foreword
The text of document 55/741/FDIS, future edition 1 of IEC 60264-5-2, prepared by IEC TC 55,
Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60264-5-2 on 2001-06-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-06-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60264-5-2:2001 was approved by CENELEC as a
European Standard without any modification.
__________
- 3 - EN 60264-5-2:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60264-4-1 - Packaging of winding wires --
Part 4-1: Methods of test - Delivery
spools made from thermoplastic
materials
-1) 2)
IEC 60264-5-1 Part 5-1: Cylindrical barrelled delivery EN 60264-5-1 1997
spools with conical flanges - Basic
dimensions
1)
undated reference.
2)
valid edition at date of issue.

NORME CEI
INTERNATIONALE IEC
60264-5-2
INTERNATIONAL
Première édition
STANDARD
First edition
2001-03
Conditionnement des fils de bobinage –
Partie 5-2:
Bobines de livraison à fût de forme
cylindrique avec les joues coniques –
Spécification pour les bobines réutilisables,
faites de matériau thermoplastique
Packaging of winding wires –
Part 5-2:
Cylindrical barrelled delivery spools
with conical flanges –
Specification for returnable spools
made from thermoplastic material
 IEC 2001 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
G
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60264-5-2  IEC:2001 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PACKAGING OF WINDING WIRES –
Part 5-2: Cylindrical barrelled delivery spools with conical flanges –
Specification for returnable spools made from thermoplastic material
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees
...