EN 61182-2-2:2012

Printed board assembly products - Manufacturing description data and transfer methodology - Part 2-2: Sectional requirements for implementation of printed board fabrication data description

IEC 61182-2-2:2012 provides the information on the manufacturing requirements used for fabricating printed boards. This standard determines the XML schema details, defined in the generic standard IEC 61182-2 and some of the sectional standards that are required to accomplish the focused tasks. When other standards are invoked, their requirements become a mandatory part of the fabrication details as defined in the IEC 61182-2.

Leiterplatten - Beschreibung und Transfer von Daten - Teil 2-2: Anforderungen für die Anwendung von Dokumentationsdaten der Leiterplattenfertigung

Produits pour cartes imprimées équipées - Données descriptives de fabrication et méthodologie de transfert - Partie 2-2: Exigences intermédiaires pour la mise en oeuvre de cartes imprimées - Description des données de fabrication

La CEI 61182-2-2:2012 fournit les informations relatives aux exigences de construction utilisées pour fabriquer des cartes imprimées. La présente norme détermine les détails du schéma XML, défini dans la norme générique CEI 61182-2 et certaines des normes intermédiaires qui sont requises pour réaliser les tâches concernées. Lorsque d'autres normes sont associées, leurs exigences deviennent une partie obligatoire des détails de fabrication comme défini dans la CEI 61182-2.

Izdelki s sestavi tiskanih plošč - Podatki o izdelovanju in prenos metodologije - 2-2. del: Posamezne zahteve za uvajanje opisovanja podatkov o izdelavi tiskanih vezij

V tem delu standarda IEC 61182 so navedene informacije o zahtevah za izdelavo tiskanih vezij. Ta standard določa podrobnosti o shemi XML, ki je opredeljena v splošnem standardu IEC 61182-2 in nekaterih področnih standardih, ki se zahtevajo za izvedbo glavnih nalog. Ob sklicevanju na zahteve iz drugih standardov je treba te zahteve obvezno navesti v podrobnih podatkih o proizvodnji iz standarda IEC 61182-2. V standardu IEC 61182-2 so navedene vse potrebne zahteve za izdelavo elektronskih proizvodov. Kardinalnost iz standarda IEC 61182-2 se lahko nadomesti z omejitvijo atributa (našteti ID niza) ali zahtevo, ki je v splošnem standardu opredeljena kot neobvezna. Vendar je v skladu s tem standardom navedena zahteva obvezna zaradi potrebe komunikacije v dobavni verigi. Vsi zadevni elementi sheme XML, ki se uporabljajo pri funkciji izdelave vezij, so v pomoč uporabnikom tega standarda navedeni v dodatku A. Seznam je razporejen glede na teme in prikazuje absolutno pot elementov, na katere se osredotoča ta standard. Če ni osrednjega elementa, se pri izvedbi ne upoštevajo podrejeni elementi. Vendar vsi atributi, ki so opredeljeni za določen element, upoštevajo kardinalnost standarda IEC 61182-2, razen če je v tem standardu navedena omejitev.

General Information

• Status: Withdrawn
• Publication Date: 21-Jun-2012
• Withdrawal Date: 31-May-2015
• ICS: 31.180 - Printed circuits and boards
• Technical Committee: CLC/SR 91 - Electronics assembly technology
• Drafting Committee: IEC/TC 91 - IEC_TC_91
• Parallel Committee: IEC/TC 91 - IEC_TC_91
• Ref Project: SIST EN 61182-2-2:2012 - Printed board assembly products - Manufacturing description data and transfer methodology - Part 2-2: Sectional requirements for implementation of printed board fabrication data description

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61182-2-2:2012
01-september-2012
,]GHONLVVHVWDYLWLVNDQLKSORãþ3RGDWNLRL]GHORYDQMXLQSUHQRVPHWRGRORJLMH
GHO3RVDPH]QH]DKWHYH]DXYDMDQMHRSLVRYDQMDSRGDWNRYRL]GHODYLWLVNDQLK
YH]LM
Printed board assembly products - Manufacturing description data and transfer
methodology - Part 2-2: Sectional requirements for implementation of printed board
fabrication data description
Leiterplatten - Beschreibung und Transfer von Daten - Teil 2-2: Anforderungen für die
Anwendung von Dokumentationsdaten der Leiterplattenfertigung
Produits pour cartes imprimées équipées - Données descriptives de fabrication et
méthodologie de transfert -- Partie 2-2: Exigences intermédiaires pour la mise en oeuvre
de cartes imprimées - Description des données de fabrication
Ta slovenski standard je istoveten z: EN 61182-2-2:2012
ICS:
31.180 7LVNDQDYH]MD7,9LQWLVNDQH Printed circuits and boards
SORãþH
SIST EN 61182-2-2:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61182-2-2:2012

---------------------- Page: 2 ----------------------

SIST EN 61182-2-2:2012

EUROPEAN STANDARD
EN 61182-2-2

NORME EUROPÉENNE
June 2012
EUROPÄISCHE NORM

ICS 31.180


English version


Printed board assembly products -
Manufacturing description data and transfer methodology -
Part 2-2: Sectional requirements for implementation
of printed board fabrication data description
(IEC 61182-2-2:2012)


Produits pour cartes imprimées équipées - Leiterplatten -
Données descriptives de fabrication Beschreibung und Transfer von Daten -
et méthodologie de transfert - Teil 2-2: Anforderungen für die
Partie 2-2: Exigences intermédiaires pour Anwendung von Dokumentationsdaten
la mise en oeuvre de cartes imprimées - der Leiterplattenfertigung
Description des données de fabrication (IEC 61182-2-2:2012)
(CEI 61182-2-2:2012)




This European Standard was approved by CENELEC on 2012-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61182-2-2:2012 E

---------------------- Page: 3 ----------------------

SIST EN 61182-2-2:2012
EN 61182-2-2:2012 - 2 -
Foreword
The text of document 91/1025/FDIS, future edition 1 of IEC 61182-2-2, prepared by IEC/TC 91
"Electronics assembly technology" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 61182-2-2:2012.
The following dates are fixed:
(dop) 2013-03-01
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-06-01
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61182-2-2:2012 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 61188-5-1 NOTE Harmonised as EN 61188-5-1.
IEC 61188-5-2 NOTE Harmonised as EN 61188-5-2.
IEC 61188-5-3 NOTE Harmonised as EN 61188-5-3.
IEC 61188-5-4 NOTE Harmonised as EN 61188-5-4.
IEC 61188-5-5 NOTE Harmonised as EN 61188-5-5.
IEC 61188-5-6 NOTE Harmonised as EN 61188-5-6.
IEC 61188-5-8 NOTE Harmon
...