Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval

Specifies the minimum requirements for the design qualification and type approval of concentrator photovoltaic modules and assemblies suitable for long-term operation in general open-air climates. The test sequence is partially based on that specified in IEC 61215. Determines the electrical, mechanical, and thermal characteristics of the CPV modules and assemblies and shows that the CPV modules and assemblies are capable of withstanding prolonged exposure in climates described in the scope.

Konzentrator-Photovoltaik(CPV)-Module und -Anordnungen – Bauarteignung und Bauartzulassung

Modules et ensembles photovoltaïques à concentration - Qualification de la conception et homologation

Spécifie les exigences minimales pour la qualification de la conception et l'homologation des modules et ensembles photovoltaïques à concentration pour une utilisation de longue durée dans les climats généraux d'air libre. La séquence d'essais est issue partiellement de celle spécifiée dans la CEI 61215. Détermine les caractéristiques électriques, mécaniques et thermiques des modules et ensembles CPV et montre que les modules et ensembles CPV sont aptes à supporter une exposition prolongée aux climats définis dans le domaine d'application.

Koncentratorski fotonapetostni (CPV) moduli in sestavi - Ocena zasnove in odobritev tipa (IEC 62108:2007)

General Information

Status
Withdrawn
Publication Date
20-Mar-2008
Withdrawal Date
31-Jan-2011
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
31-Oct-2019
Completion Date
31-Oct-2019

Relations

Buy Standard

Standard
EN 62108:2008
English language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approvalKoncentratorski fotonapetostni (CPV) moduli in sestavi - Ocena zasnove in odobritev tipa (IEC 62108:2007)Modules et ensembles photovoltaïques à concentration
- Qualification de la conception et homologationKonzentrator-Photovoltaik(CPV)-Module und -Anordnungen - Bauarteignung und Bauartzulassung27.160Solar energy engineeringICS:SIST EN 62108:2008en,fr,deTa slovenski standard je istoveten z:EN 62108:200801-september-2008SIST EN 62108:2008SLOVENSKI
STANDARD







EUROPEAN STANDARD EN 62108 NORME EUROPÉENNE
EUROPÄISCHE NORM March 2008
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62108:2008 E
ICS 27.160
English version
Concentrator photovoltaic (CPV) modules and assemblies -
Design qualification and type approval (IEC 62108:2007)
Modules et ensembles photovoltaïques
à concentration -
Qualification de la conception
et homologation (CEI 62108:2007)
Konzentrator-Photovoltaik(CPV)-Module und -Anordnungen -
Bauarteignung und Bauartzulassung (IEC 62108:2007)
This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.



EN 62108:2008
- 2 -
Foreword The text of document 82/494/FDIS, future edition 1 of IEC 62108, prepared by IEC TC 82, Solar photovoltaic energy systems, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62108 on 2008-02-01. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2008-11-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2011-02-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 62108:2007 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60904-1 NOTE
Harmonized as EN 60904-1:2006 (not modified). IEC 61730-1 NOTE
Harmonized as EN 61730-1:2007 (modified). IEC 61730-2 NOTE
Harmonized as EN 61730-2:2007 (modified). __________



- 3 - EN 62108:2008 Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60068-2-21 2006 Environmental testing -
Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices EN 60068-2-21 2006
IEC 61215 2005 Crystalline silicon terrestrial photovoltaic
(PV) modules - Design qualification and type approval EN 61215 2005
ISO/IEC 17025 2005 General requirements for the competence
of testing and calibration laboratories EN ISO/IEC 17025 2005
ANSI/UL 1703 2002 Flat-Plate Photovoltaic Modules and Panels - -







IEC 62108Edition 1.0 2007-12INTERNATIONAL STANDARD NORME INTERNATIONALEConcentrator photovoltaic (CPV) modules and assemblies –Design qualification and type approval
Modules et ensembles photovoltaïques à concentration – Qualification de la conception et homologation
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE WICS 27.160 PRICE COD
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.