EN 60950:1992/A11:1997
(Amendment)Safety of information technology equipment
- BACK
- 13-Oct-1997
- 31-Jul-1998
- 35.020
- 1999/5/EC
- 2006/95/EC
- 73/23/EEC
- CLC/TC 108X
Safety of information technology equipment
Superseded by EN 60950:2000 * Published by former TC 74
Sicherheit von Einrichtungen der Informationstechnik
Sécurité des matériels de traitement de l'information
Safety of information technology equipment - Amendment A11
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60950:1996/A11:1999
01-marec-1999
Safety of information technology equipment - Amendment A11
Safety of information technology equipment
Sicherheit von Einrichtungen der Informationstechnik
Sécurité des matériels de traitement de l'information
Ta slovenski standard je istoveten z: EN 60950:1992/A11:1997
ICS:
35.020 Informacijska tehnika in Information technology (IT) in
tehnologija na splošno general
SIST EN 60950:
...
This May Also Interest You
2021-10-08: EC GPSD request NOT to offer this AC because only corrects the French version. Link GPSD removed
TAN - // IEC Corrigendum
- Corrigendum3 pagesFrench languagesale 10% offe-Library read for×1 day
IEC 62368-3:2017 applies to equipment intended to supply and receive operating power through communication cables or ports. It covers particular requirements for circuits that are designed to transfer DC power from a power sourcing equipment (PSE) to a powered device (PD). The power transfer uses voltages at ES1 or ES2 or in very specific cases voltage levels at ES3. Any cable provided with a connector defined by an industry standard that permits DC power transfer between equipment is considered a communication cable even if communication does not take place. For example, a USB cable can be used just to recharge a portable device battery. This International Standard is to be used in conjunction with IEC 62368-1:2014. It has the status of a group safety publication in accordance with IEC Guide 104. The subclauses of IEC 62368-1 apply as far as reasonable. Where safety aspects are similar to those of IEC 62368-1, the relevant clause or subclause of IEC 62368-1 is given for reference in a note in the relevant subclause. Where a requirement in IEC 62368-3 refers to a requirement or criterion of IEC 62368-1, a specific reference to IEC 62368-1 is made. This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of standards for products similar to those mentioned in the scope of this standard, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51. Keywords: Communication, Safety, Cables, DC Power Transfer,
- Standard28 pagesEnglish languagesale 10% offe-Library read for×1 day
- 26-Mar-2020
- 19-Dec-2020
- 33.160.01
- 35.020
- 2014/35/EU
- 2014/53/EU
- M/511
- M/536
- CLC/TC 108X
2021-10-25: temporary removed link GPSD until feedback from EC
2019-10-01: BT decision D163/015.: decouple from OJEU citation process
2019-09-02 NEXT STEP: BT consultation on 1 Oct. 2019
2019-09-02: doc for BT meeting 1 Oct asking to decouple + no HAS assessment needed
2019-08-06 text for FV submitted, asking to decouple from OJEU
2019-05-24 TC 108X+CCMC+EC+HAS Cons comments resolution meeting
2019-03-15 - GEM - issues with ENQ text for PR= 67625 - way forward proposed to TC (incl. WS with EC)
2019-03-01 GEM: HAS assessment challenged
2018-11-09 - GEM - project is extremely important and urgent for industry. The standard needs to be 'harmonized', it is imperative to get to a positive assessment prior to launching ENQ. --> See GEM before starting any action
2018-07-09 - GEM - Common modifications to prEN 62368-1 (PR = 67625)..
Synchronyze enquiry with enquiry for adoption of IEC 62368-1 Ed.3 (PR=67625).
HAS Consultant assessment of main + amdt required - assessment to b
- Amendment20 pagesEnglish languagesale 10% offe-Library read for×1 day
- Amendment20 pagesEnglish languagesale 10% offe-Library read for×1 day
- 05-Mar-2020
- 05-Jan-2023
- 33.160.01
- 35.020
- 2001/95/EC
- 2014/35/EU
- 2014/53/EU
- M/452
- M/511
- M/536
- CLC/TC 108X
NEW!IEC 62368-1:2018 is available as IEC 62368-1:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62368-1:2018 is applicable to the safety of electrical and electronic equipment within the field of audio, video, information and communication technology, and business and office machines with a rated voltage not exceeding 600 V. This document does not include requirements for performance or functional characteristics of equipment. This is a product safety standard that classifies energy sources, prescribes safeguards against those energy sources, and provides guidance on the application of, and requirements for, those safeguards. The prescribed safeguards are intended to reduce the likelihood of pain, injury and, in the case of fire, property damage. This third edition cancels and replaces the second edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: – addition of requirements for outdoor equipment; – new requirements for optical radiation; – addition of requirements for insulating liquids; – addition of requirements for work cells; – addition of requirements for wireless power transmitters; – addition of requirements for fully insulated winding wire (FIW); – alternative method for determination of top, bottom and side openings for fire enclosures; – alternative requirements for sound pressure. This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of standards for products similar to those mentioned in the scope of this standard, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51. Key words: Audio, Video, Communication, Safety
- Standard381 pagesEnglish languagesale 10% offe-Library read for×1 day
IEC 62949:2017 applies to the interface of equipment designed and intended to be connected as a communication terminal to an information and communication technology (ICT) network termination. This document does not apply to: - equipment covered by IEC 62368-1; or - interfaces to other networks. This document specifies the safety requirements of the interface to the ICT network only. Requirements additional to those specified in this document may be necessary for equipment intended for operation while exposed, for example, to extremes of temperature, to excessive dust, moisture, or vibration, to flammable gases, to corrosive or explosive atmospheres and electro medical applications with physical connections to the patient. The following requirements are not covered by this document: - functional safety of equipment; - functional reliability of equipment; - communication facilities with remote supply using hazardous voltage; - protection of equipment connected to ICT networks from functional damage. Key words: Audio/video, Communication Terminal. ICT Network, External Circuits
- Standard28 pagesEnglish languagesale 10% offe-Library read for×1 day
- 08-Jun-2017
- 19-Jun-2019
- 33.160
- 35.020
- 2014/35/EU
- M/511
- CLC/TC 108X
IEC 60950-22:2016 is available as IEC 60950-22:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60950-22:2016 applies to information technology equipment intended to be installed in an outdoor location. The requirements for outdoor equipment also apply, where relevant, to outdoor enclosures suitable for direct installation in the field and supplied for housing information technology equipment to be installed in an outdoor location. Each installation may have particular requirements. Some examples are given in 4.2. In addition, requirements for protection of the outdoor equipment against the effects of direct lightning strikes are not covered by the standard. For information on this subject, see IEC 62305-1. This second edition cancels and replaces the first edition published in 2005. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: More extensive requirements for battery ventilation. Key words: Outdoor Equipment, Outdoor Locations, Outdoor Enclosure This publication is to be read in conjunction with IEC 60950-1:2005.
- Standard35 pagesEnglish languagesale 10% offe-Library read for×1 day
- 13-Apr-2017
- 13-Apr-2020
- 29.020
- 35.020
- 1999/5/EC
- 2006/95/EC
- 2014/35/EU
- 2014/53/EU
- M/511
- M/536
- CLC/TC 108X
2021-09-29: email DG JUST: not suitable for citation GPSD
2019-12-10: TC 108X decision: link GPSD was for sound pressure requirements personal music players. GPSD citation no longer needed because most music players are RED. Link citation under GPSD removed.
2019-09-26: not to be offered for LVD citation, DOW extension
Corrigendum - BTagreed to extend the DOW of EN 62368-1:2014 from DOR + 36 months to 2020-12-20
- Corrigendum1 pageEnglish languagesale 10% offe-Library read for×1 day
2021-09-29: email DG JUST: not suitable for citation GPSD
2020-10-02: EC formal rejection from citation LVD 2014/35/EU
2019-12-10: TC 108X decision: link GPSD was for sound pressure requirements personal music players. GPSD citation no longer needed because most music players are RED. Link citation under GPSD removed.
2019-09-26 PeC: no Annex ZZ, unflagged for LVD citation
- Amendment3 pagesEnglish languagesale 10% offe-Library read for×1 day
- 19-Jan-2017
- 13-Dec-2019
- 33.160.01
- 35.020
- 2001/95/EC
- 2014/35/EU
- 2014/53/EU
- M/452
- M/511
- M/536
- CLC/TC 108X
IEC 60990:2016 is available as IEC 60990:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60990:2016 defines measurement methods for d.c. or a.c. current of sinusoidal or non-sinusoidal waveform, which could flow through the human body, and current flowing through a protective conductor. The measuring methods recommended for TOUCH CURRENT are based upon the possible effects of current flowing through a human body. In this standard, measurements of current through networks representing the impedance of the human body are referred to as measurements of TOUCH CURRENT. These networks are not necessarily valid for the bodies of animals. The specification or implication of specific limit values is not within the scope of this standard. IEC TS 60479 series provides information regarding the effects of current passing through the human body from which limit values may be derived. This standard is applicable to all classes of EQUIPMENT, according to IEC 61140. The methods of measurement in this standard are not intended to be used for TOUCH CURRENTS having less than 1 s duration, patient currents as defined in IEC 60601-1, a.c. at frequencies below 15 Hz, and currents above those chosen for ELECTRIC BURN limits. This third edition cancels and replaces the second edition published in 1999. It constitutes a technical revision. The principal changes in this edition as compared with the second edition are as follows: - the effects names have been updated to reflect increased understanding of the range of effects and is in concert with present usage; - the conditions of use invoking a GRIPPABLE PART have been reduced in the application of the requirements based upon the current understanding of this effect; - the references to ISO 10012-1, which has been replaced by management standard of the same number, have been replaced with explanatory text, where needed to maintain the sense of the document; - former informative Annex H (GRIPPABLE PART) has been deleted from this update as it does not properly represent the full set of conditions under which immobilization can occur. A new informative Annex H (Analysis of frequency filtered touch current circuits measurement) has been added and the Bibliography (formerly Annex M) has been updated with additional references for completeness. This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. It is not intended for use by manufacturers or certification bodies independent of product standards. Key words: Touch Current, Protective Conductor Current, Current Flow
- Standard63 pagesEnglish languagesale 10% offe-Library read for×1 day
- Standard63 pagesEnglish languagesale 10% offe-Library read for×1 day
- 01-Sep-2016
- 03-Jul-2019
- 17.220
- 35.020
- CLC/TC 108X
IEC 62911:2016 defines routine electrical safety test procedures for use during or after manufacturing of complete equipment, sub-assemblies or components, complying with IEC 60065, IEC 60950-1 or IEC 62368-1 and powered by an a.c. mains supply or d.c. mains supply, to detect manufacturing failures and unacceptable tolerances in manufacturing and materials. All the tests defined in this standard do not necessarily have to be performed at the end product manufacturing location. The optimal location for the routine electrical safety tests can be defined by the equipment manufacturer and reviewed under the conformity assessment scheme. Key words: Audio, Video Electrical Safety Test
- Standard13 pagesEnglish languagesale 10% offe-Library read for×1 day
- 07-Apr-2016
- 09-Feb-2018
- 33.160
- 35.020
- CLC/TC 108X
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.