Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c.

IEC 61481-2:2014 is applicable to portable phase comparators of resistive type to be used on electrical systems for voltages from 1 kV a.c. to 36 kV a.c. and frequencies of 50 Hz and/or 60 Hz. This standard is applicable to phase comparators of resistive type used in contact with the bare conductive parts to be compared as a complete device including its insulating element or as a separate device, adaptable to an insulating stick which, as a separate tool, is not covered by this standard. A device that is designed to provide other functions than phase comparison is a different device and is not covered by this standard. For example a device designed to be also used as a voltage detector is not covered by this standard. This first edition, together with the first edition of IEC 61481-1, cancels and replaces the first edition of IEC 61481 published in 2001, Amendment 1:2002 and Amendment 2:2004. This edition constitutes a technical revision which includes the following major changes: - split of the standard in two parts; - review of the requirements for indication; - elimination of class C (+/- 110°); - introduction of a requirement for a new marking "LU" for limited use; - increase of the specified range of voltage fluctuation in a network for clear indication; - and revision of the existing annexes.

Arbeiten unter Spannung - Phasenvergleicher - Teil 2: Resistive (ohmsche) Ausführung für Wechselspannungen über 1 kV bis 36 kV

Travaux sous tension - Comparateurs de phase - Partie 2: Type résistif pour usage sur des tensions alternatives de 1 kV à 36 kV

L'IEC 61481-2:2014 est applicable aux comparateurs de phase portatifs de type résistif pour une utilisation sur des installations électriques à des tensions alternatives de 1 kV à 36 kV et à des fréquences de 50 Hz et/ou 60 Hz. La présente norme est applicable aux comparateurs de phase de type résistif utilisés au contact avec les parties nues conductrices à comparer à un dispositif complet incluant son élément isolant ou à un dispositif séparé adaptable sur une perche isolante qui, en tant qu'outil séparé, n'est pas couverte par la présente norme. Un dispositif conçu pour réaliser d'autres fonctions que la comparaison de phase est un dispositif différent et n'est pas couvert par la présente norme. Par exemple, un dispositif conçu pour être aussi utilisé comme détecteur de tension n'est pas couvert par la présente norme. Cette première édition, avec la première édition de l'IEC 61481-1, annule et remplace la première édition de l'IEC 61481 parue en 2001, l'Amendement 1:2002 et l'Amendement 2:2004. Cette édition constitue une révision technique qui inclut les modifications majeures suivantes: - la division de la norme en deux parties; - la révision des exigences relatives à l'indication; - la suppression de la classe C (+/- 110°); - l'introduction d'une exigence relative à un nouveau marquage "LU" pour une utilisation limitée; - et la révision des annexes existantes.

Delo pod napetostjo - Fazni primerjalniki - 2. del: Uporovne vrste za izmenične napetosti od 1 kV do 36 kV (IEC 61481-2:2014)

Ta del standarda IEC 61481 se uporablja za prenosne fazne primerjalnike uporovne vrste za električne sisteme z izmenično napetostjo od 1 kV do 36 kV in frekvencama 50 Hz in/ali 60 Hz. Ta standard se uporablja za fazne primerjalnike uporovne vrste, ki se uporabljajo pri stiku z golimi prevodnimi deli za primerjavo:
• kot celotna naprava, vključno z izolacijskim elementom ali
• kot ločena naprava, prilagodljiva izolacijski palici, ki, kot ločeno orodje, ni zajeta v tem standardu.
OPOMBA Nekatere dele, kot sta kontaktna elektroda ali izolacijski element faznega primerjalnika kot celotne naprave, je mogoče razstaviti.
Pri njihovi uporabi veljajo nekatere omejitve, in sicer v primeru tovarniško sestavljenih stikalnih in nadzemnih sistemov elektrificiranih železnic (glej dodatek A).
Naprava, zasnovana za zagotavljanje drugih funkcij, kot je fazna primerjava, je drugačna naprava in ni zajeta s tem standardom. Na primer naprava, ki je namenjena tudi uporabi kot detektor napetosti, ni zajeta s tem standardom (glej dodatek A).
Izdelki, zasnovani in izdelani v skladu s tem standardom, prispevajo k varnosti uporabnikov, če jih uporabljajo osebe, usposobljene za to delo, in se uporabljajo v skladu z metodo dela na oddaljenosti ter navodili za uporabo.
Razen kadar je določeno drugače, se vse napetosti, določene v tem standardu, nanašajo na medfazne napetosti trifaznih sistemov. Pri drugih sistemih je treba za določanje obratovalne napetosti uporabiti ustrezno medfazno in dozemno napetost.

General Information

Status
Published
Publication Date
04-Dec-2014
Withdrawal Date
27-Nov-2017
Current Stage
6060 - Document made available - Publishing
Start Date
05-Dec-2014
Completion Date
05-Dec-2014

Relations

Buy Standard

Standard
EN 61481-2:2015 - BARVE
English language
81 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61481-2:2015
01-april-2015
1DGRPHãþD
SIST EN 61481:2002
SIST EN 61481:2002/A1:2003
SIST EN 61481:2002/A2:2007
'HORSRGQDSHWRVWMR)D]QLSULPHUMDOQLNLGHO8SRURYQHYUVWH]DL]PHQLþQH
QDSHWRVWLRGN9GRN9 ,(&
Live working - Phase comparators -- Part 2: Resistive type to be used for voltages from 1
kV to 36 kV a.c.
Ta slovenski standard je istoveten z: EN 61481-2:2014
ICS:
13.260 9DUVWYRSUHGHOHNWULþQLP Protection against electric
XGDURP'HORSRGQDSHWRVWMR shock. Live working
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
SIST EN 61481-2:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61481-2:2015

---------------------- Page: 2 ----------------------

SIST EN 61481-2:2015


EUROPEAN STANDARD EN 61481-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2014
ICS 13.260; 29.240.20; 29.260.99 Supersedes EN 61481:2001 (partially)
English Version
Live working - Phase comparators - Part 2: Resistive type to be
used for voltages from 1 kV to 36 kV a.c.
(IEC 61481-2:2014)
Travaux sous tension - Comparateurs de phase -  Arbeiten unter Spannung - Phasenvergleicher -
Partie 2: Type résistif pour usage sur des tensions Teil 2: Resistive (ohmsche) Ausführung für
alternatives de 1 kV à 36 kV Wechselspannungen über 1 kV bis 36 kV
(CEI 61481-2:2014) (IEC 61481-2:2014)
This European Standard was approved by CENELEC on 2014-11-28. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61481-2:2014 E

---------------------- Page: 3 ----------------------

SIST EN 61481-2:2015
EN 61481-2:2014 - 2 -
Foreword
The text of document 78/1052/FDIS, future edition 1 of IEC 61481-2, prepared by IEC/TC 78 "Live
working" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 61481-2:2014.

The following dates are fixed:
(dop) 2015-08-28
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-11-28
standards conflicting with the
document have to be withdrawn

This document supersedes EN 61481:2001 (partially).

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 61481-2:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60038 NOTE Harmonized as EN 60038.
IEC 60071-1:2006 NOTE Harmonized as EN 60071-1:2006 (not modified).
IEC 60743:2013 NOTE Harmonized as EN 60743:2013 (not modified).
IEC 61235:1993 NOTE Harmonized as EN 61235:1995 (modified).
IEC 61936-1:2010 NOTE Harmonized as EN 61936-1:2010 (modified).
ISO/IEC 17025 NOTE Harmonized as EN ISO/IEC 17025 (not modified).

---------------------- Page: 4 ----------------------

SIST EN 61481-2:2015
- 3 - EN 61481-2:2014
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its applica
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.