EN 62822-2:2016

Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 2: Arc welding equipment

IEC 62822-2:2016 applies to equipment for arc welding and allied processes designed for occupational use by professionals and for use by laymen.

Elektrische Schweißeinrichtungen - Bewertung in Bezug auf Begrenzungen der Exposition von Personen gegenüber elektromagnetischen Feldern (0 Hz bis 300 GHz) - Teil 2: Lichtbogenschweißeinrichtungen

Matériels de soudage électrique - Évaluation des restrictions relatives à l'exposition humaine aux champs électromagnétiques (0 Hz à 300 GHz) - Partie 2: Matériels de soudage à l’arc

L'IEC 62822-2:2016 s'applique aux matériels de soudage à l'arc et techniques connexes conçus pour un usage professionnel et non professionnel.

Ocena električne varilske opreme glede na omejitve izpostavljenosti delavcev elektromagnetnim poljem (0Hz . 300 GHz) - 2. del: Osnovni standard za obločno varjenje (IEC 62822-2:2016)

Ta del standarda IEC 62822 se uporablja za opremo za obločno varjenje in sorodne postopke, zasnovano za uporabo pri delu strokovnjakov in laikov.
OPOMBA 1: Tipični sorodni postopki so električno obločno rezanje in brizganje.
Ta standard določa postopke za oceno izpostavljenosti delavcev magnetnim poljem, ki ustvarijo pri obločnem varjenju. Obravnava atermične biološke vplive v frekvenčnem razponu od 0 HZ do 10 MHz in določa standardizirane preskusne scenarije.
OPOMBA 2: Splošni izraz »polje« se v tem dokumentu uporablja za »magnetno polje«.
OPOMBA 3: Za oceno izpostavljenosti električnim poljem in toplotnim vplivom se uporabljajo metode, podane v splošnem standardu IEC 62311.
Ta standard ne določa metod za oceno delovnega mesta v povezavi s tveganji zaradi elektromagnetnih polj (EMF). Vendar podatki o elektromagnetnih poljih, ki se pridobijo na podlagi uporabe tega standarda, se lahko uporabijo kot pomoč pri ocenjevanju delovnega mesta.
Za proizvode, ki jih obravnava ta standard, se lahko uporabljajo drugi standardi. Ta standard se ne uporablja za dokazovanje elektromagnetne združljivosti z drugo opremo. Ne določa nobenih varnostnih zahtev za proizvode, razen tistih, ki se posebej navezujejo na izpostavljenost delavcev elektromagnetnim poljem.

General Information

• Status: Published
• Publication Date: 15-Sep-2016
• Withdrawal Date: 15-Sep-2019
• ICS: 25.160 - Welding, brazing and soldering
• ICS: 25.160.30 - Welding equipment
• Technical Committee: CLC/TC 26 - Electric welding
• Drafting Committee: IEC/TC 26 - IEC_TC_26
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 16-Sep-2016
• Completion Date: 16-Sep-2016
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Ref Project: SIST EN 62822-2:2016 - Assessment of electric welding equipment related to resctrictions of human exposure to electromagnetic fields (0Hz . 300 GHz) - Part 2: Basic standard for arc welding equipment (IEC 62822-2:2016)

Relations

• Replaces: EN 50444:2008 - Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for arc welding and allied processes
• Effective Date: 24-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62822-2:2016
01-november-2016
2FHQDHOHNWULþQHYDULOVNHRSUHPHJOHGHQDRPHMLWYHL]SRVWDYOMHQRVWLGHODYFHY
HOHNWURPDJQHWQLPSROMHP+]*+]GHO2VQRYQLVWDQGDUG]DREORþQR
YDUMHQMH,(&
Assessment of electric welding equipment related to resctrictions of human exposure to
electromagnetic fields (0Hz . 300 GHz) - Part 2: Basic standard for arc welding
equipment (IEC 62822-2:2016)
Ta slovenski standard je istoveten z: EN 62822-2:2016
ICS:
13.280 Varstvo pred sevanjem Radiation protection
25.160.30 Varilna oprema Welding equipment
SIST EN 62822-2:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62822-2:2016

---------------------- Page: 2 ----------------------

SIST EN 62822-2:2016


EUROPEAN STANDARD EN 62822-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2016
ICS 25.160; 25.160.30

English Version
Electric welding equipment - Assessment of restrictions related
to human exposure to electromagnetic fields (0 Hz to 300 GHz) -
Part 2: Arc welding equipment
(IEC 62822-2:2016)
Matériels de soudage électrique - Évaluation des Bewertung Elektrischer Schweisseinrichtungen in Bezug
restrictions relatives à l'exposition humaine aux champs auf Begrenzungen der Exposition von Personen gegenüber
électromagnétiques (0 Hz à 300 GHz) - Elektromagnetischen Feldern (0 Hz - 300 GHz) -
Partie 2: Matériels de soudage à l'arc Teil 2: Grundnorm für Lichtbogenschweißeinrichtungen
(IEC 62822-2:2016) (IEC 62822-2:2016)
This European Standard was approved by CENELEC on 2016-05-04. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62822-2:2016 E

---------------------- Page: 3 ----------------------

SIST EN 62822-2:2016
EN 62822-2:2016
European foreword
The text of document 26/584/FDIS, future edition 1 of IEC 62822-2, prepared by IEC/TC 26 "Electric
welding" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 62822-2:2016.

The following dates are fixed:
(dop) 2017-03-16
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-09-16
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 62822-2:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 62226-1 NOTE Harmonized as EN 62226-1.
IEC 62226-2-1:2004 NOTE Harmonized as EN 62226-2-1:2005 (not modified).
IEC 62311 NOTE Harmonized as EN 62311.
2

---------------------- Page: 4 ----------------------

SIST EN 62822-2:2016
EN 62822-2:2016
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1
...