EN 50390:2004
(Main)Space product assurance - The manual soldering of high-reliability electrical connections
Space product assurance - The manual soldering of high-reliability electrical connections
This standard defines the technical requirements and quality assurance provisions for the manual soldering of highreliability electrical connections intended for use in spacecraft and associated equipment. The rigorous requirements set by this standard ensure the high reliability of handsoldered electrical connections intended to withstand normal terrestrial conditions and the vibrational Gloads and environment imposed by space flight. The proper tools, correct materials, design and workmanship are covered by this standard. Acceptance and rejection criteria are stated and some workmanship standards are included to discriminate between proper and improper work. Wavesoldering processes and surface mount technologies are specified in separate documents, and those processes require to be verified as prescribed in the respective standard.
Raumfahrt-Produktsicherung - Handlöten elektrischer Verbindungen hoher Zuverlässigkeit
Conformité pour les produits spatiaux - Manuel de soudabilité des connexions électriques de haute fiabilité
Zagotavljanje vesoljskih izdelkov - Ročno spajkanje visoko zanesljivih električnih spojev
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VSRMHYRaumfahrt-Produktsicherung - Handlöten elektrischer Verbindungen hoher ZuverlässigkeitConformité pour les produits spatiaux - Manuel de soudabilité des connexions électriques de haute fiabilitéSpace product assurance - The manual soldering of high-reliability electrical connections49.060Aerospace electric equipment and systems25.160.50Trdo in mehko lotanjeBrazing and solderingICS:Ta slovenski standard je istoveten z:EN 50390:2004SIST EN 50390:2007en01-januar-2007SIST EN 50390:2007SLOVENSKI
STANDARD
SIST EN 50390:2007
EUROPEAN STANDARD
EN 50390 NORME EUROPÉENNE EUROPÄISCHE NORM
July 2004 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50390:2004 E
ICS 49.060
English version
Space product assurance –
The manual soldering of high-reliability electrical connections
Conformité pour les produits spatiaux - Manuel de soudabilité des connexions électriques de haute fiabilité
Raumfahrt-Produktsicherung –
Handlöten elektrischer Verbindungen hoher Zuverlässigkeit
This European Standard was approved by CENELEC on 2004-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in two official versions (English, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 50390:2007
EN 50390:2004 - 2 -
Foreword This European Standard has been prepared by the former CENELEC BTTF 91-3, Space equipment standardization, the work of which has been transferred by 113 BT to CENELEC TC 107X, Process management for avionics. It is based on a previous version 1) originally prepared by the ECSS Product Assurance Working Group, reviewed by the ECSS Technical Panel and approved by the ECSS Steering Board. The European Cooperation for Space Standardization (ECSS) is a cooperative effort of the European Space Agency, National Space Agencies and European industry associations for the purpose of developing and maintaining common standards. This European Standard is one of the series of space standards intended to be applied together for the management, engineering and product assurance in space projects and applications. Requirements in this European Standard are defined in terms of what shall be accomplished, rather than in terms of how to organize and perform the necessary work. This allows existing organizational structures and methods to be applied where they are effective, and for the structures and methods to evolve as necessary without rewriting the standards. The formulation of this European Standard takes into account the existing ISO 9000 family of documents. The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50390 on 2004-04-01. The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-04-01
- latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-04-01
——————— 1) ECSS-Q-70-08A. SIST EN 50390:2007
- 3 - EN 50390:2004
Contents Page Introduction.8 1 Scope.8 2 Normative references.8 3 Terms, definitions and abbreviated terms.9 3.1 Terms and definitions.9 3.2 Abbreviated terms.17 4 Pr
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.