EN IEC 62149-3:2020
(Main)Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems
Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems
IEC 62149-3:2014 covers the performance specification for optical modulators monolithically integrated with laser diodes for 2,5 Gbit/s to 40 Gbit/s multi-channel fibre optic transmission systems. This performance standard contains a definition of the product performance requirements together with a series of sets of tests and measurements with clearly defined conditions, severities and pass/fail criteria. The tests are intended to be run as an initial design verification to prove any product's ability to satisfy the performance standard's requirements. This standard is only applicable for on-off keying format. This second edition cancels and replaces the first edition published in 2004 and constitutes a technical revision. The significant technical change with respect to the previous edition is as follows: The performance standards covered by this standard are now extended to a 40 Gb/s-class system from their original 2,5 Gb/s. Keywords: optical modulators monolithically integrated, laser diodes, 2,5 Gbit/s to 40 Gbit/s multi-channel fibre optic transmission systems
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 3: Sender mit modulatorintegrierten Laserdioden für 40 Gbit/s-Lichtwellenleiter-Übertragungssysteme
Composants et dispositifs actifs fibroniques - Normes de performances - Partie 3: Émetteurs à diodes laser à modulateur intégré pour systèmes de transmission fibroniques 40 Gbit/s
L'IEC 62149-3:2014 couvre les spécifications de performance concernant les modulateurs optiques avec diodes laser intégrées de façon monolithique, destinés à des systèmes de transmission à fibres optiques à canaux multiples de 2,5 Gbit/s à 40 Gbit/s. La présente norme de performance donne une définition des exigences de performances de produits, ainsi qu'une série d'ensembles d'essais et de mesures, avec des conditions, des sévérités et des critères d'acceptation/de rejet clairement définis. Les essais sont prévus pour être réalisés à titre de vérification initiale de conception, pour prouver la capacité des produits à satisfaire aux exigences des normes de performance. La présente norme n'est applicable qu'au format de codage binaire. Cette deuxième édition annule et remplace la première édition parue en 2004, dont elle constitue une révision technique. La modification technique significative par rapport à l'édition précédente concerne les standards de performance couverts par la présente norme qui sont maintenant élargies pour inclure les systèmes de classe 40 Gb/s à partir des valeurs originales des systèmes 2,5 Gb/s. Mots clés: modulateurs optiques avec diodes laser intégrées de façon monolithique, diodes laser, systèmes de transmission à fibres optiques à canaux multiples de 2,5 Gbit/s à 40 Gbit/s
Aktivne komponente in naprave optičnih vlaken - Izvedbeni standardi - 3. del: Laserski diodni oddajniki z integriranim modulatorjem za optične prenosne sisteme 40-Gbit/s (IEC 62149-3:2020)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62149-3:2020
01-december-2020
Nadomešča:
SIST EN 62149-3:2015
Aktivne komponente in naprave optičnih vlaken - Izvedbeni standardi - 3. del:
Laserski diodni oddajniki z integriranim modulatorjem za optične prenosne
sisteme 40-Gbit/s (IEC 62149-3:2020)
Fibre optic active components and devices - Performance standards - Part 3: Modulator-
integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems (IEC
62149-3:2020)
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 3: Sender mit
modulatorintegrierten Laserdioden für 40 Gbit/s-Lichtwellenleiter-Übertragungssysteme
(IEC 62149-3:2020)
Composants et dispositifs actifs fibroniques - Normes de performances - Partie 3:
Émetteurs à diodes laser à modulateur intégré pour systèmes de transmission
fibroniques 40 Gbit/s (IEC 62149-3:2020)
Ta slovenski standard je istoveten z: EN IEC 62149-3:2020
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 62149-3:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62149-3:2020
---------------------- Page: 2 ----------------------
SIST EN IEC 62149-3:2020
EUROPEAN STANDARD EN IEC 62149-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2020
ICS 33.180.20 Supersedes EN 62149-3:2014 and all of its amendments
and corrigenda (if any)
English Version
Fibre optic active components and devices - Performance
standards - Part 3: Modulator-integrated laser diode transmitters
for 40-Gbit/s fibre optic transmission systems
(IEC 62149-3:2020)
Composants et dispositifs actifs fibroniques - Normes de Aktive Lichtwellenleiterbauelemente und -geräte -
performances - Partie 3: Émetteurs à diodes laser à Betriebsverhalten - Teil 3: Sender mit modulatorintegrierten
modulateur intégré pour systèmes de transmission Laserdioden für 40 Gbit/s-Lichtwellenleiter-
fibroniques 40 Gbit/s Übertragungssysteme
(IEC 62149-3:2020) (IEC 62149-3:2020)
This European Standard was approved by CENELEC on 2020-08-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62149-3:2020 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62149-3:2020
EN IEC 62149-3:2020 (E)
European foreword
The text of document 86C/1666/FDIS, future edition 3 of IEC 62149-3, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62149-3:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-05-11
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-08-11
document have to be withdrawn
This document supersedes EN 62149-3:2014 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62149-3:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60068 (series) NOTE Harmonized as EN 60068 (series)
I
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.