Indicator light units for household and similar fixed-electrical installations - Part 1: General requirements

This International Standard applies to stand-alone indicator light units intended to give a visible signal. They are designed for a.c. only with a rated voltage not exceeding 440 V and a rated power not exceeding 10 W, for household and similar fixed-electrical installations, either indoors or outdoors.

Anzeigeleuchten für Haushalt und ähnliche ortsfeste elektrische Installationen - Teil 1: Allgemeine Anforderungen

Voyants lumineux pour installations électriques fixes domestiques et analogues - Partie 1: Prescriptions générales

La présente Norme internationale s'applique aux voyants lumineux seuls prévus pour donner un signal visible. Ils sont conçus pour courant alternatif seulement, de tension assignée ne dépassant pas 440 V et de puissance assignée ne dépassant pas 10 W, pour installations électriques fixes domestiques et analogues, soit intérieures, soit extérieures.

Indicator light units for household and similar fixed-electrical installations - Part 1: General requirements (IEC 62094-1:2002)

General Information

Status
Published
Publication Date
07-Jan-2003
Withdrawal Date
30-Nov-2005
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
6060 - Document made available - Publishing
Start Date
08-Jan-2003
Completion Date
08-Jan-2003

Relations

Buy Standard

Standard
EN 62094-1:2004
English language
64 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 62094-1:2004

STANDARD
januar 2004
(istoveten EN 62094-1:2003)
Indicator light units for household and similar fixed-electrical installations - Part 1:
General requirements (IEC 62094-1:2002)
ICS 29.120.99; 29.140.99 Referenčna številka
SIST EN 62094-1:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 62094-1
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2003

ICS 29.120.99; 29.140.99


English version


Indicator light units for household
and similar fixed-electrical installations
Part 1: General requirements
(IEC 62094-1:2002)


Voyants lumineux pour installations Anzeigeleuchten für Haushalt
électriques fixes domestiques und ähnliche ortsfeste elektrische
et analogues Installationen
Partie 1: Prescriptions générales Teil 1: Allgemeine Anforderungen
(CEI 62094-1:2002) (IEC 62094-1:2002)






This European Standard was approved by CENELEC on 2002-12-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 62094-1:2003 E

---------------------- Page: 2 ----------------------

EN 62094-1:2003 - 2 -
Foreword

The text of document 23B/679/FDIS, future edition 1 of IEC 62094-1, prepared by SC 23B, Plugs,
socket-outlets and switches, of IEC TC 23, Electrical accessories, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 62094-1 on 2002-12-01.

The following dates were fixed:

– latest date by which the EN has to be implemented
 at national level by publication of an identical
 national standard or by endorsement (dop) 2003-09-01

– latest date by which the national standards conflicting
 with the EN have to be withdrawn (dow) 2005-12-01

Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________

Endorsement notice

The text of the International Standard IEC 62094-1:2002 was approved by CENELEC as a European
Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60417-1 NOTE Harmonized as EN 60417-1:1999 (not modified).
IEC 60598 NOTE Harmonized in EN 60598 series (modified).
IEC 60999-1 NOTE Harmonized as EN 60999-1:2000 (not modified).
__________

---------------------- Page: 3 ----------------------

- 3 - EN 62094-1:2003
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60061 (mod) Series Lamp caps and holders together with EN 60061 Series
gauges for the control of
interchangeability and safety

1) 2)
IEC 60112 - Method for determining the comparative HD 214 S2 1980
and the proof tracking indices of solid
insulating materials under moist
conditions

1) 2)
IEC 60212 - Standard conditions for use prior to and HD
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.