EN 60061-1:1993
(Main)Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
Subscribe to IEC 60061 Database to access the full and updated content of the series. Consolidated edition incorporating the sheets of the third edition (1969) plus supplements A, B, C, D, E, F, G, H, J, K, L, M, N, P, Q R, S, T and U valid on 1996-12-31.
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 1: Lampensockel
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 1: Culots de lampes
Subscribe to IEC 60061 Database to access the full and updated content of the series. Edition consolidée incorporant les feuilles de la troisième édition (1969) et de ses compléments A, B, C, D, E, F, G, H, J, K, L, M, N, R, S, T et U valable au 31 décembre 1996.
Vznožki in okovi sijalk skupaj s kalibri za nadzorovanje izmenljivosti in varnosti – 1. del: Vznožki sijalk
Vsebuje priporočila IEC v zvezi z vznožki in okovi žarnic in sijalk , ki so danes v splošni rabi, skupaj z ustreznimi kalibri, s ciljem zagotoviti mednarodno medsebojno zamenljivost. Ponazorjeni kalibri, čeprav načeloma splošno sprejeti, niso nujno edina oblika, v kateri so lahko narejeni. Ponazorjeni kalibri, čeprav načeloma splošno sprejeti, niso nujno edina oblika, v kateri so lahko narejeni.
General Information
Relations
Overview
EN 60061-1:1993 (adopted by CLC and consolidated in later editions) is the European adoption of the IEC series that defines requirements for lamp caps - the mechanical and electrical end fittings of electric lamps - and the gauges used to check their interchangeability and safety. The consolidated edition incorporates the third edition (1969) and numerous supplements (A–U) as valid at 1996‑12‑31. To access the full, up‑to‑date technical content you should subscribe to the IEC 60061 Database.
Key topics and requirements
The document focuses on standardization elements that ensure lamps and lamp holders work safely and interchangeably across manufacturers and markets. Key technical topics typically covered (high level) include:
- Scope and definitions: standardized terminology for lamp caps, holders and control gauges.
- Dimensional specifications and tolerances: standardized dimensions and fits to ensure mechanical interchangeability between lamps and holders.
- Mechanical and electrical interfaces: requirements governing contact locations, clearances, creepage distances and secure mechanical engagement.
- Marking and identification: guidance on how lamp caps are identified so compatibility is clear to manufacturers and end users.
- Gauges and conformity checks: design and use of gauges for verifying interchangeability and dimensional conformity during production and inspection.
- Safety and performance considerations: normative guidance to reduce risk of arcing, overheating or poor contact that could compromise safety.
- Testing and verification: conformance checks and inspection practices (refer to the full standard for specific test procedures).
Note: EN 60061-1 is Part 1 of a multi‑part series; it addresses lamp caps specifically while other parts of the series cover holders, gauges and related topics.
Applications and users
This standard is essential for stakeholders in the lighting ecosystem:
- Lamp and lamp‑holder manufacturers - to design caps that mate reliably and safely with standard holders.
- Quality and compliance laboratories - for production inspection, dimensional gauging and conformity assessment.
- Regulatory bodies and standards committees - to harmonize safety and interchangeability rules across markets.
- Lighting designers, specifiers and procurement teams - to ensure selected lamps meet compatibility and safety expectations.
- Electrical installers and maintenance personnel - to understand standardized interfaces and reduce risk during replacement.
Related standards
- IEC 60061 series (complete set covering lamp caps, holders and gauges) - subscribe to the IEC 60061 Database for consolidated and updated content.
- Other national/adopted EN parts in the 60061 series that address lamp holders, gauges and test methods.
For full normative requirements, dimensional tables and test procedures refer to the official EN/IEC publication available via CLC/IEC subscription services.
Frequently Asked Questions
EN 60061-1:1993 is a standard published by CLC. Its full title is "Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps". This standard covers: Subscribe to IEC 60061 Database to access the full and updated content of the series. Consolidated edition incorporating the sheets of the third edition (1969) plus supplements A, B, C, D, E, F, G, H, J, K, L, M, N, P, Q R, S, T and U valid on 1996-12-31.
Subscribe to IEC 60061 Database to access the full and updated content of the series. Consolidated edition incorporating the sheets of the third edition (1969) plus supplements A, B, C, D, E, F, G, H, J, K, L, M, N, P, Q R, S, T and U valid on 1996-12-31.
EN 60061-1:1993 is classified under the following ICS (International Classification for Standards) categories: 29.140.10 - Lamp caps and holders. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60061-1:1993 has the following relationships with other standards: It is inter standard links to EN 60061-1:1993/A64:2025, EN 60061-1:1993/A5:1996, EN 60061-1:1993/A47:2012, EN 60061-1:1993/A4:1996, EN 60061-1:1993/A27:2014, EN 60061-1:1993/A6:1996, EN 60061-1:1993/A51:2015, EN 60061-1:1993/A39:2007, EN 60061-1:1993/A28:2002, EN 60061-1:1993/A21:1998, EN 60061-1:1993/A49:2013, EN 60061-1:1993/A23:1999, EN 60061-1:1993/A26:2001, EN 60061-1:1993/A22:1999, EN 60061-1:1993/A2:1995. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 60061-1:1993 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 2009/125/EC, 73/23/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 60061-1:1993 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-1999
Vznožki in okovi sijalk skupaj s kalibri za nadzorovanje izmenljivosti in varnosti –
1. del: Vznožki sijalk
Lamp caps and holders together with gauges for the control of interchangeability and
safety -- Part 1: Lamp caps
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und
Sicherheit -- Teil 1: Lampensockel
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et
de la sécurité -- Partie 1: Culots de lampes
Ta slovenski standard je istoveten z: EN 60061-1:1993
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Pa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...