iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61788-2:1999

(Main)

Superconductivity - Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors

Superconductivity - Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors

Covers a test method for the determination of the d.c. critical current of Nb3Sn composite superconductors which are fabricated by either the bronze process or the internal tin diffusion process and have a copper/non-copper ratio larger than 0,2.

Supraleitfähigkeit - Teil 2: Messen des kritischen Stromes - Kritischer Strom (Gleichstrom) von Nb3Sn-Verbundsupraleitern

Supraconductivité - Partie 2: Mesure du courant critique - Courant critique continu des supraconducteurs composites Nb3Sn

Traite d'une méthode d'essai pour la détermination du courant critique continu des supraconducteurs composites Nb3Sn qui sont fabriqués soit par le procédé du bronze, soit par le procédé de diffusion interne de l'étain, et dont le rapport cuivre/non-cuivre est supérieur à 0,2.

Superconductivity - Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors

General Information

Status
Withdrawn
Publication Date
17-Aug-1999
ICS
17.220 - Electricity. Magnetism. Electrical and magnetic measurements
29.050 - Superconductivity and conducting materials
Technical Committee
CLC/SR 90 - Superconductivity
Drafting Committee
IEC/TC 90 - IEC_TC_90
Parallel Committee
IEC/TC 90 - IEC_TC_90
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Dec-2009
Completion Date
01-Dec-2009
Ref Project
SIST EN 61788-2:2001 - Superconductivity -- Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors

Relations

Replaced By
EN 61788-2:2007 - Superconductivity - Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors
Effective Date
29-Jan-2023

Buy Standard

EN 61788-2:2001EN 61788-2:2001
PreviousNext
Standard
EN 61788-2:2001
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61788-2:2001
01-september-2001
Superconductivity - Part 2: Critical current measurement - DC critical current of
Nb3Sn composite superconductors
Superconductivity -- Part 2: Critical current measurement - DC critical current of Nb3Sn
composite superconductors
Supraleitfähigkeit -- Teil 2: Messen des kritischen Stromes - Kritischer Strom
(Gleichstrom) von Nb3Sn-Verbundsupraleitern
Supraconductivité -- Partie 2: Mesure du courant critique - Courant critique continu des
supraconducteurs composites Nb3Sn
Ta slovenski standard je istoveten z: EN 61788-2:1999
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
29.050 Superprevodnost in prevodni Superconductivity and
materiali conducting materials
SIST EN 61788-2:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61788-2:2001

---------------------- Page: 2 ----------------------

SIST EN 61788-2:2001

---------------------- Page: 3 ----------------------

SIST EN 61788-2:2001

---------------------- Page: 4 ----------------------

SIST EN 61788-2:2001

---------------------- Page: 5 ----------------------

SIST EN 61788-2:2001

---------------------- Page: 6 ----------------------

SIST EN 61788-2:2001

---------------------- Page: 7 ----------------------

SIST EN 61788-2:2001

---------------------- Page: 8 ----------------------

SIST EN 61788-2:2001

---------------------- Page: 9 ----------------------

SIST EN 61788-2:2001

---------------------- Page: 10 ----------------------

SIST EN 61788-2:2001

---------------------- Page: 11 ----------------------

SIST EN 61788-2:2001

---------------------- Page: 12 ----------------------

SIST
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61788-23:2021(Main)
Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of cavity-grade Nb superconductors
SIST EN IEC 61788-23:2021

This part of IEC 61788 addresses a test method for the determination of the residual resistance ratio (RRR), rRRR, of cavity-grade niobium. This method is intended for high-purity niobium grades with 150 < rRRR < 600. The test method is valid for specimens with rectangular or round cross-section, cross-sectional area greater than 1 mm2 but less than 20 mm2, and a length not less than 10 nor more than 25 times the width or diameter.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61788-7:2020(Main)
Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of high-temperature superconductors at microwave frequencies
SIST EN IEC 61788-7:2020

IEC 61788-7:2020 is available as IEC 61788-7:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61788-7:2020 describes measurement of the surface resistance (Rs) of superconductors at microwave frequencies by the standard two-resonator method. The object of measurement is the temperature dependence of Rs at the resonant frequency. The applicable measurement range of Rs for this method is as follows: - Frequency: 8 GHz < f < 30 GHz - Measurement resolution: 0,01 m Ω at 10 GHz The Rs data at the measured frequency, and that scaled to 10 GHz, assuming the f 2 rule for comparison, is reported. This third edition cancels and replaces the second edition, published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) informative Annex B, relative combined standard uncertainty for surface resistance measurement has been added; b) precision and accuracy statements have been converted to uncertainty; c) reproducibility in surface resistant measurement has been added.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61788-23:2018(Main)
Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of Nb superconductors
SIST EN IEC 61788-23:2018

IEC 61788-23:2018 addresses a test method for the determination of the residual resistance ratio (RRR) of cavity-grade niobium. The test method should be valid for specimens with rectangular or round cross-section, cross-sectional area greater than 1 mm2 but less than 20 mm2, and a length not less than 10 nor more than 25 times the width or diameter.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61788-24:2018(Main)
Superconductivity - Part 24: Critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires
SIST EN IEC 61788-24:2018

IEC 61788-24:2018 describes a test method for determining the retained critical current after double bending at room temperature of short and straight Ag- and/or Ag alloy-sheathed Bi-2223 superconducting wires that have the shape of a flat or square tape containing mono- or multicores of oxides. The wires can be laminated with copper alloy, stainless steel or Ni alloy tapes. The test method is intended for use with superconductors that have a critical current less than 300 A and an n-value larger than 5.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61788-22-1:2017(Main)
Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors
SIST EN 61788-22-1:2018

IEC 61788-22-1:2017(E) describes general items concerning the specifications for superconducting sensors and detectors, which are the basis for specifications given in other parts of IEC 61788 for various types of sensors and detectors. The sensors and detectors described are basically made of superconducting materials and depend on superconducting phenomena or related phenomena. The objects to be measured (measurands) include magnetic fields, electromagnetic waves, photons of various energies, electrons, ions, a‑particles, and others.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61788-21:2015(Main)
Superconductivity - Part 21: Superconducting wires - Test methods for practical superconducting wires - General characteristics and guidance
SIST EN 61788-21:2015

IEC 61788-21:2015 specifies the test methods used for validating the mechanical, electrical, and superconducting properties of practical SC wires.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61788-13:2012(Main)
Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
SIST EN 61788-13:2012

IEC 61788-13:2012 describes considerations for the measurement of hysteretic loss in Cu/Nb-Ti multifilamentary composites using DC- or low-ramp-rate magnetometry. This international standard specifies a method of the measurement of hysteretic loss in multifilamentary Cu/Nb-Ti composite conductors. Measurements are assumed to be on round wires with temperatures at or near 4,2 K. DC or low-ramp-rate magnetometry will be performed using either a superconducting quantum interference device or a vibrating-sample magnetometer. Extension to the measurement of superconductors in general is given in Annex. This second edition cancels and replaces the first edition published in 2003. It constitutes a technical revision. Modifications made to the second edition extend to the measurement of superconductors in general, in various sample sizes and shapes, and at temperatures other than 4,2 K, and use the word 'uncertainty' for all quantitative statistical expressions to eliminate the quantitative use of 'precision' and 'accuracy'.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61788-2:2007(Main)
Superconductivity - Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors
SIST EN 61788-2:2008

This part of IEC 61788 covers a test method for the determination of the d.c. critical current of Nb3Sn composite superconductors which are fabricated by either the bronze process or the internal tin diffusion process and have a copper/non-copper ratio larger than 0,2. This method is intended for use with superconductors which have critical currents of less than 1 000 A and n-values larger than 12 under standard test conditions and at magnetic fields of less than or equal to 0,7 times the upper critical magnetic field. The test specimen is immersed in a liquid helium bath at a known temperature during testing. The Nb3Sn composite test conductor has a monolithic structure with a total round-cross-sectional area that is less than 2 mm2. The specimen geometry used in this test method is an inductively coiled specimen. Deviations from this test method which are allowed for routine tests and other specific restrictions are given in this standard. Nb3Sn conductors with critical currents above 1 000 A or total cross-sectional areas greater than 2 mm2 can be measured with the present method with an anticipated reduction in precision and a more significant self-field effect (see Annex C). Other, more specialized, specimen test geometries may be more appropriate for larger conductor testing which have been omitted from this present standard for simplicity and to retain precision. The test method given in this standard should in principle apply to Nb3Sn composite wires fabricated by any other process. This method is also expected to apply to other superconducting composite wires after some appropriate modifications.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61788-1:2007(Main)
Superconductivity - Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors
SIST EN 61788-1:2008

This part of IEC 61788 covers a test method for the determination of the d.c. critical current of either Cu/Nb-Ti composite superconductors that have a copper/superconductor ratio larger than 1 or Cu/Cu-Ni/Nb-Ti wires that have a copper/superconductor ratio larger than 0,9 and a copper alloy (Cu-Ni)/superconductor ratio larger than 0,2, where the diameter of Nb-Ti superconducting filaments is larger than 1 micrometre. The changes for the Cu/Cu-Ni/Nb-Ti are described in Annex C. The Cu-Ni uses all of the main part of the standard with the exceptions listed in Annex C that replace (and in some cases are counter to) some of the steps inthe main text. This method is intended for use with superconductors that have critical currents less than 1 000 A and n-values larger than 12, under standard test conditions and at magnetic fields less than or equal to 0,7 of the upper critical magnetic field. The test specimen is immersed in a liquid helium bath at a known temperature during testing. The test conductor has a monolithic structure with a round or rectangular cross-sectional area that is less than 2 mm2. The specimen geometry used in this test method is an inductively coiled specimen. Deviations from this test method that are allowed for routine tests and other specific restrictions are given in this standard. Test conductors with critical currents above 1 000 A or cross-sectional areas greater than 2 mm2 could be measured with the present method with an anticipated increase in uncertainty and a more significant self-field effect (see Annex B). Other, more specialized, specimen test geometries may be more appropriate for larger conductor testing which have been omitted from this present standard for simplicity and to retain a lower uncertainty. The test method given in this standard is expected to apply to other superconducting composite wires after some appropriate modifications.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61788-3:2006(Main)
Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors
SIST EN 61788-3:2007

This part of IEC 61788 covers a test method for the determination of the dc critical current of short and straight Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors that have a monolithic structure and a shape of round wire or flat or square tape containing mono- or multicores of oxides. This method is intended for use with superconductors that have critical currents less than 500 A and n-values larger than 5. The test is carried out with and without an applying external magnetic field. For all tests in a magnetic field, the magnetic field is perpendicular to the length of the specimen. In the test of a tape specimen in a magnetic field, the magnetic field is parallel or perpendicular to the wider tape surface (or one surface if square). The test specimen is immersed either in a liquid helium bath or a liquid nitrogen bath during testing. Deviations from this test method that are allowed for routine tests and other specific restrictions are given in this standard.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day