EN 61029-2-10:2010/A11:2013

Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders

2013-01-23 - UAP text received - To be dispatched to Consultant prior to UAP 2012-10-05 - UAP text dispatched to Consultant In hands of WG 2 * D141/C079: NWI approved * Amendment to existing CMs*2013-02-26: UAP allocated to [e-mail]*2013-06-18: Publication allocated to [e-mail]

Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-10: Besondere Anforderungen für Trennschleifmaschinen

Sécurité des machines-outils électriques semi-fixes - Partie 2-10: Règles particulières pour les tourets à couper

Varnost premičnih električnih orodij - 2-10. del: Posebne zahteve za brusilnike za rezanje kovine - Dopolnilo A11

Uporablja se ta klavzula prvega dela, razen kot sledi:
1.1 Dodatek:
Ta evropski standard velja za brusilnike za rezanje kovine, namenjene rezanju kovin z uporabo rotirajoče brusilne plošče za rezanje kovine:
- z brusilno ploščo za rezanje kovine, katere premer ne presega 406 mm;
- katere obodna hitrost ne presega 80 m/s.

General Information

• Status: Withdrawn
• Publication Date: 22-Aug-2013
• Withdrawal Date: 21-Jul-2016
• ICS: 25.080.60 - Sawing machines
• ICS: 25.140.20 - Electric tools
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 19-Oct-2019
• Completion Date: 19-Oct-2019
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Ref Project: SIST EN 61029-2-10:2010/A11:2014 - Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders

Relations

• Replaced By: EN 62841-3-10:2015 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines
• Effective Date: 29-Jan-2023
• Amends: EN 61029-2-10:2010 - Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61029-2-10:2010/A11:2014
01-februar-2014
9DUQRVWSUHPLþQLKHOHNWULþQLKRURGLMGHO3RVHEQH]DKWHYH]DEUXVLOQLNH]D
UH]DQMHNRYLQH'RSROQLOR$
Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements
for cutting-off grinders
Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-10: Besondere
Anforderungen für Trennschleifmaschinen
Sécurité des machines-outils électriques semi-fixes - Partie 2-10: Règles particulières
pour les tourets à couper
Ta slovenski standard je istoveten z: EN 61029-2-10:2010/A11:2013
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 61029-2-10:2010/A11:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61029-2-10:2010/A11:2014

---------------------- Page: 2 ----------------------

SIST EN 61029-2-10:2010/A11:2014

EUROPEAN STANDARD
EN 61029-2-10/A11

NORME EUROPÉENNE
August 2013
EUROPÄISCHE NORM

ICS 25.080.60; 25.140.20


English version


Safety of transportable motor-operated electric tools -
Part 2-10: Particular requirements for cutting-off grinders



Sécurité des machines-outils électriques Sicherheit transportabler motorbetriebener
semi-fixes - Elektrowerkzeuge -
Partie 2-10: Règles particulières pour les Teil 2-10: Besondere Anforderungen für
tourets à couper Trennschleifmaschinen






This amendment A11 modifies the European Standard EN 61029-2-10:2010; it was approved by CENELEC on
2013-07-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61029-2-10:2010/A11:2013 E

---------------------- Page: 3 ----------------------

SIST EN 61029-2-10:2010/A11:2014
EN 61029-2-10:2010/A11:2013 – 2 –
Foreword
This document (EN 61029-2-10:2010/A11:2013) has been prepared by CLC/TC 116 "Safety of motor-
operated electric tools".
The following dates are fixed:
– latest date by which this document has to be implemented (dop) 2014-07-22
at national level by publication of an identical national
standard or by endorsement
– latest date by which the national standards conflicting with (dow) 2016-07-22
this document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This amendment was developed to streamline Table Z102 and to bring EN 61029-2-10:2010 in line
with current practice and machines in production.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
NOTE In this European Standard the following print types are used:
- requirements proper: in roman type;
- test specifications: in italic type;
- explanatory matter: in smaller roman type.

---------------------- Page: 4 ----------------------

SIST EN 61029-2-10:2010/A11:2014
– 3 – EN 61029-2-10:2010/A11:2013

2 Definitions
Replace the existing 2.105 by the following:
2.105
workpiece vice
device intended to support and maintain the workpiece in position
13 Environmental requirements
Replace the existing subclause 13.2.4 by the following one:
13.2.4 Replacement of paragraphs 1, 2 and 3:
Cutting-off machines are tested under load in accordance with Table Z101.
Table Z101 – O
...