EN 60974-10:2007
(Main)Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements
Specifies applicable standards and test methods for radio-frequency emissions; applicable standards and test methods for harmonic current emission, voltage fluctuations and flicker; immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges. This new edition takes into account new editions of EMC publications.
Lichtbogenschweißeinrichtungen - Teil 10: Anforderungen an die elektromagnetische Verträglichkeit (EMV)
Matériel de soudage à l'arc - Partie 10: Exigences relatives à la compatibilité électromagnétique (CEM)
Spécifie les normes applicables et les méthodes d'essai pour les émissions de radiofréquence; les normes applicables et les méthodes d'essai pour les émissions de courant harmoniques, les fluctuations de tension et les papillotements; les exigences d'immunités et les méthodes d'essai pour les perturbations continues ou transitoires, conduites et rayonnées, y compris les décharges électrostatiques. Cette nouvelle édition prend en considération de nouvelles éditions des publications CEM.
Oprema za obločno varjenje - 10. del: Zahteve za elektromagnetno združljivost (EMC) (IEC 60974-10:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2008
1DGRPHãþD
SIST EN 60974-10:2003
2SUHPD]DREORþQRYDUMHQMHGHO =DKWHYH]DHOHNWURPDJQHWQR]GUXåOMLYRVW
(0& ,(&
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements
Lichtbogenschweißeinrichtungen - Teil 10: Anforderungen an die elektromagnetische
Verträglichkeit (EMV)
Matériel de soudage à l'arc - Partie 10: Exigences relatives à la compatibilité
électromagnétique (CEM)
Ta slovenski standard je istoveten z: EN 60974-10:2007
ICS:
25.160.30
33.100.01
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60974-10
NORME EUROPÉENNE
December 2007
EUROPÄISCHE NORM
ICS 25.160 Supersedes EN 60974-10:2003
English version
Arc welding equipment -
Part 10: Electromagnetic compatibility (EMC) requirements
(IEC 60974-10:2007)
Matériel de soudage à l'arc - Lichtbogenschweißeinrichtungen -
Partie 10: Exigences relatives à la Teil 10: Anforderungen an die
compatibilité électromagnétique (CEM) elektromagnetische Verträglichkeit (EMV)
(CEI 60974-10:2007) (IEC 60974-10:2007)
This European Standard was approved by CENELEC on 2007-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60974-10:2007 E
Foreword
The text of document 26/341/CDV, future edition 2 of IEC 60974-10, prepared by IEC TC 26, Electric
welding, was submitted to the IEC-CENELEC parallel Unique Acceptance Procedure and was approved
by CENELEC as EN 60974-10 on 2007-12-01.
This European Standard supersedes EN 60974-10:2003.
Significant technical changes with respect to EN 60974-10:2003 are:
– application of more stringent r.f. emission limits for the idle mode;
– mandatory classification of arc starting and stabilizing devices as Class A equipment;
– additional immunity tests (surges and r.f. common-mode currents);
– inclusion of informative Annex B, containing the applicable emission limits for information of the user
of the standard.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-12-01
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and covers essential requirements of
EC Directive 2004/108/EC. See Annex ZZ.
Annexes ZA and ZZ have been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60974-10:2007 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60974-10:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1)
IEC 60050-161 – International Electrotechnical Vocabulary – –
(IEV) –
Chapter 161: Electromagnetic compatibility
1)
IEC 60050-851 – International Electrotechnical Vocabulary – –
(IEV) –
Chapter 851: Electric welding
1) 2)
IEC 60974-1 – Arc welding equipment – EN 60974-1 2005
Part 1: Welding power sources
1) 2)
IEC 60974-3 – Arc welding equipment – EN 60974-3 2007
Part 3: Arc striking and stabilizing devices
1) 2)
IEC 60974-6 – Arc welding equipment – EN 60974-6 2003
Part 6: Limited duty manual metal arc + corr. May 2005
welding power sources
IEC 61000-3-2 2005 Electromagnetic compatibility (EMC) – EN 61000-3-2 2006
Part 3-2: Limits - Limits for harmonic current
emissions (equipment input current ≤ 16 A
per phase)
IEC 61000-3-3 1994 Electromagnetic compatibility (EMC) – EN 61000-3-3 1995
Part 3-3: Limits - Limitation of voltage + corr. July 1997
A1 2001 changes, voltage fluctuations and flicker in A1 2001
A2 2005 public low-voltage supply systems, for A2 2005
equipment with rated current ≤ 16 A per
phase and not subject to conditional
connection
1)
IEC/TS 61000-3-4 – Electromagnetic compatibility (EMC) – – –
Part 3-4: Limits - Limitation of emission of
harmonic currents in low-voltage power
supply systems for equipment with rated
current greater than 16 A
———————
1)
Undated reference.
2)
Valid edition at date of issue.
Publication Year Title EN/HD Year
IEC 61000-3-11 2000 Electromagnetic compatibility (EMC) – EN 61000-3-11 2000
Part 3-11: Limits - Limitation of voltage
changes, voltage fluctuations and flicker in
public low-voltage supply systems -
Equipment with rated current ≤ 75 A and
subject to conditional connection
IEC 61000-3-12 2004 Electromagnetic compatibility (EMC) – EN 61000-3-12 2005
Part 3-12: Limits - Limits for harmonic
currents produced by equipment connected to
public low-voltage systems with input current
> 16 A and ≤ 75 A per phase
1) 2)
IEC 61000-4-2 – Electromagnetic compatibility (EMC) – EN 61000-4-2 1995
Part 4-2: Testing and measurement
techniques - Electrostatic discharge immunity
test
1) 2)
IEC 61000-4-3 – Electromagnetic compatibility (EMC) – EN 61000-4-3 2006
Part 4-3: Testing and measurement
techniques - Radiated, radio-frequency,
electromagnetic field immunity test
1) 2)
IEC 61000-4-4 – Electromagnetic compatibility (EMC) – EN 61000-4-4 2004
Part 4-4: Testing and measurement
techniques - Electrical fast transient/burst
immunity test
1) 2)
IEC 61000-4-5 – Electromagnetic compatibility (EMC) – EN 61000-4-5 2006
Part 4-5: Testing and measurement
techniques - Surge immunity test
1) 2)
IEC 61000-4-6 – Electromagnetic compatibility (EMC) – EN 61000-4-6 2007
Part 4-6: Testing and measurement + corr. August 2007
techniques - Immunity to conducted
disturbances, induced by radio-frequency
fields
1) 2)
IEC 61000-4-11 – Electromagnetic compatibility (EMC) – EN 61000-4-11 2004
Part 4-11: Testing and measurement
techniques - Voltage dips, short interruptions
and voltage variations immunity tests
3)
CISPR 11 (mod) 2003 Industrial scientific and medical (ISM) radio- EN 55011 2007
frequency equipment - Electromagnetic
disturbance characteristics - Limits and
methods of measurement
1) 2)
CISPR 14-1 – Electromagnetic compatibility - Requirements EN 55014-1 2006
for household appliances, electric tools and
similar apparatus –
Part 1: Emission
———————
3)
EN 55011 includes A1:2004 to CISPR 11 (mod).
- 5 - EN 60974-10:2007
Publication Year Title EN/HD Year
1) 2)
CISPR 16-1-1 – Specification for radio disturbance and EN 55016-1-1 2007
immunity measuring apparatus and
methods –
Part 1-1: Radio disturbance and immunity
measuring apparatus - Measuring apparatus
1) 2)
CISPR 16-1-2 – Specification for radio disturbance and EN 55016-1-2 2004
immunity measuring apparatus and
methods –
Part 1-2: Radio disturbance and immunity
measuring apparatus - Ancillary equipment -
Conducted disturbances
1) 2)
CISPR 16-1-4 – Specification for radio disturbance and EN 55016-1-4 2007
immunity measuring apparatus and
methods –
Part 1-4: Radio disturbance and immunity
measuring apparatus - Ancillary equipment -
Radiated disturbances
Annex ZZ
(informative)
Coverage of Essential Requirements of EC Directives
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and within its scope the standard covers all
relevant essential requirements as given in Annex I of the EC Directive 2004/108/EC.
Compliance with this standard provides one means of conformity with the specified essential
requirements of the Directive concerned.
WARNING: Other requirements and other EC Directives may be applicable to the products falling within
the scope of this standard.
___________
IEC 60974-10
Edition 2.0 2007-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Arc welding equipment –
Part 10: Electromagnetic compatibility (EMC) requirements
Matériel de soudage à l’arc –
Partie 10: Exigences de compatibilité électromagnétique (CEM)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
T
CODE PRIX
ICS 25.160 ISBN 2-8318-9302-X
– 2 – 60974-10 © IEC:2007
CONTENTS
FOREWORD.4
1 Scope.6
2 Normative references .6
3 Terms and definitions .7
4 General test requirements .8
4.1 Test conditions.8
4.2 Measuring instruments .8
4.3 Artificial mains network .8
4.4 Voltage probe.8
4.5 Antennas.8
5 Test set-up for emission and immunity.8
5.1 General .8
5.2 Load.10
5.3 Ancillary equipment .10
5.3.1 General requirements .10
5.3.2 Wire feeders.10
5.3.3 Remote controls .11
6 Emission tests .11
6.1 Classification for r.f. emission tests .11
6.1.1 Class A equipment .11
6.1.2 Class B equipment .11
6.2 Test conditions.11
6.2.1 Welding power source .11
6.2.2 Load.12
6.2.3 Wire feeders.12
6.2.4 Ancillary equipment .12
6.3 Emission limits .13
6.3.1 General .13
6.3.2 Mains terminal disturbance voltage.13
6.3.3 Electromagnetic radiation disturbance .14
6.3.4 Harmonics, voltage fluctuations and flicker .14
7 Immunity tests .14
7.1 Classification.14
7.1.1 Applicability of tests.14
7.1.2 Category 1.14
7.1.3 Category 2.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.