prEN IEC 60810:2026

• Status: Not Published
• Publication Date: 16-Mar-2028
• ICS: 29.140.99 - Other standards related to lamps
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Current Stage: 4020 - Enquiry circulated - Enquiry
• Start Date: 09-Oct-2026
• Due Date: 01-Feb-2027
• Completion Date: 09-Oct-2026
• Ref Project: oSIST prEN IEC 60810:2026 - Lamps, light sources and LED packages for road vehicles - Performance requirements

• Revises: EN IEC 60810:2018 - Lamps, light sources and led packages for road vehicles - Performance requirements
• Effective Date: 20-Jan-2026
• Revises: EN IEC 60810:2018/A2:2022 - Lamps, light sources and LED packages for road vehicles - Performance requirements
• Effective Date: 20-Jan-2026
• Revises: EN IEC 60810:2018/A1:2019 - Lamps, light sources and LED packages for road vehicles - Performance requirements
• Effective Date: 20-Jan-2026

SLOVENSKI STANDARD
01-december-2026
Sijalke, svetlobni viri in paketi svetlečih diod (LED) za cestna vozila - Tehnične
zahteve
Lamps, light sources and LED packages for road vehicles - Performance requirements
Lampes, sources lumineuses et LED encapsulées pour véhicules routiers - Exigences
de performances
Ta slovenski standard je istoveten z: prEN IEC 60810:2026
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
43.040.20 Naprave za osvetlitev, Lighting, signalling and
signalizacijo in opozarjanje warning devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

34A/2483/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60810 ED6
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2026-10-09 2027-01-01
SUPERSEDES DOCUMENTS:
34A/2462A/RR
IEC SC 34A : ELECTRIC LIGHT SOURCES
SECRETARIAT: SECRETARY:
United Kingdom Mr Petar Luzajic
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):

ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Lamps, light sources and LED packages for road vehicles - Performance requirements

PROPOSED STABILITY DATE: 2030
NOTE FROM TC/SC OFFICERS:
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, o r any part of it, for
any other purpose without permission in writing from IEC.

IEC CDV 60810 © IEC 2026
Link to Committee Draft for Vote (CDV) online document:
Click here
How to access
This link leads you to the Online Standards Development (OSD) platform for National Mirror
Committee’s (NMC) comments. The project draft may be found further down this document.

Resource materials
We recommend NCs to review the available materials to better understand the member
commenting on the OSD platform. This includes the:
• OSD NC roles overview
• How to add and submit comments to the IEC

Contact
Should you require any assistance, please contact the IEC IT Helpdesk.
IEC CDV 60810 © IEC 2026
CONTENTS
CONTENTS . 3
FOREWORD . 8
INTRODUCTION . 10
1 Scope . 11
2 Normative references . 11
3 Terms and definitions . 13
4 Requirements and test conditions for filament lamps . 17
4.1 Basic function and interchangeability . 17
4.2 Torsion strength . 17
4.3 Characteristic life T . 17
c
4.4 Life B . 18
4.5 Luminous flux maintenance . 18
4.6 Resistance to vibration and shock . 18
4.7 Glass-bulb strength . 18
5 Filament lamp data . 18
6 Requirements and test conditions for discharge lamps . 22
6.1 Basic function and interchangeability . 22
6.2 Mechanical strength . 23
6.2.1 Bulb-to-cap connection . 23
6.2.2 Cable-to-cap connection (if any) . 23
6.3 Characteristic life T . 23
c
6.4 Life B . 23
6.5 Luminous flux maintenance . 23
6.6 Resistance to vibration and shock . 23
6.7 Discharge lamps with integrated starting device . 23
6.8 Discharge lamps with integrated starting device and integrated ballast . 23
6.9 White colour groups . 24
7 Requirements and test conditions for LED light sources . 25
7.1 Basic function and interchangeability . 25
7.2 UV radiation . 26
7.3 Luminous flux and colour maintenance . 26
7.4 Resistance to vibration and shock . 28
7.5 Electromagnetic compatibility . 28
7.6 Powered thermal cycling test . 28
7.7 Mass . 29
7.8 Typical circuits for LED light sources . 30
7.8.1 General . 30
7.8.2 Typical circuits for LR3, LR5, LR6, LY3, LY5, LY6, LW3, LW5, LW6,
LW7 and L1/6 LED light sources . 30
7.8.3 Typical circuits for LR4 LED light sources . 31
7.8.4 Typical circuits for L2 and L3 LED light sources . 31
7.9 Maximum power consumption and minimum current draw . 32
7.10 Overvoltage test . 33
7.11 Reverse voltage test . 34
7.12 Electrostatic discharge test (ESD) . 34
IEC CDV 60810 © IEC 2026
7.13 PWM Operation test . 35
7.14 White colour groups . 36
7.15 Specific requirements for L2 and L3 LED light sources . 37
8 Requirements and test conditions for LED packages . 38
8.1 LED package stress test qualification . 38
8.2 Test samples . 38
8.3 Failure Criteria . 38
8.4 Qualification criteria . 38
8.5 Qualification tests . 38
9 Requirements and test conditions for OLEDs . 38
9.1 General . 38
9.2 OLED stress test qualification . 39
9.2.1 General and test samples . 39
9.2.2 Operating mode . 39
9.2.3 Pre- and post-stress test characteristics . 40
9.2.4 Failure criteria . 40
9.2.5 UV radiation . 41
9.2.6 Solar simulation (SOL). 41
9.2.7 Resistance to vibration (VIB) . 41
9.2.8 Resistance to mechanical shock (MS) . 42
9.2.9 Powered thermal cycling test (PTMCL) . 42
9.2.10 Low temperature operating life (LTOL) test . 43
9.2.11 High temperature operating life (HTOL) test . 43
9.2.12 Temperature cycling (TMCL) test . 43
9.2.13 Wet high temperature operating life (WHTOL) test . 43
9.2.14 Electrostatic discharge, human body model (ESD-HBM) test . 44
9.2.15 Electrostatic discharge, machine model (ESD-MM) test . 44
9.2.16 Hydrogen sulphide (H S) test . 44
9.2.17 Flowing mixed gas (FMG) test . 45
9.3 Luminous flux and chromaticity coordinates maintenance . 45
9.3.1 Luminous flux maintenance . 45
9.3.2 Chromaticity coordinates maintenance . 45
Annex A (normative) Life test conditions for filament lamps . 46
A.1 Ageing . 46
A.2 Test voltage . 46
A.3 Operating position and operating conditions. 46
A.4 Switching cycle . 46
A.4.1 Single-filament lamps . 46
A.4.2 Dual-filament lamps for headlamps . 47
A.4.3 Dual-filament lamps for light signalling equipment . 47
A.5 Luminous flux and colour maintenance . 47
Annex B (normative) Vibration tests . 48
B.1 General . 48
B.2 Test conditions . 49
B.2.1 General . 49
B.2.2 Mounting (see IEC 60068-2-47 [12]) . 49
B.2.3 Measuring points . 49
B.2.4 Control point . 49
IEC CDV 60810 © IEC 2026
B.2.5 Conditioning . 49
B.2.6 Axis of vibration . 49
B.2.7 WBR test - Basic motion . 50
B.3 Test conditions . 50
B.3.1 General . 50
B.3.2 Narrowband random vibration tests . 50
B.3.3 Wideband random vibration tests . 51
Annex C (normative) Glass-bulb strength test . 53
C.1 General . 53
C.2 Test equipment and procedure . 53
C.2.1 Principle of the test equipment. 53
C.2.2 Test conditions . 53
C.2.3 Requirements for plates . 54
C.3 Requirements . 54
C.4 Evaluation . 55
C.4.1 General . 55
C.4.2 Assessment based on attributes . 55
C.4.3 Assessment based on variables . 55
Annex D (normative) Life and luminous flux maintenance test conditions for discharge
lamps . 57
D.1 Ageing . 57
D.2 Test circuit and test voltage . 57
D.3 Burning position and operating conditions . 57
D.4 Switching cycle . 57
D.5 Luminous flux maintenance . 59
Annex E (normative) Bulb deflection test . 60
E.1 General . 60
E.2 Test set-up and procedure . 60
E.3 Requirement . 60
Annex F (informative) Guidance on equipment design . 61
F.1 Pinch temperature limit . 61
F.2 Solder temperature limit . 61
F.3 Maximum filament lamp outline . 61
F.4 Maximum surge voltage . 61
F.5 Recommended instructions for use and handling of halogen filament lamps . 61
F.6 Recommended instructions for use and handling of discharge lamps . 62
Annex G (informative) Ballast design . 67
Annex H (informative) Symbols . 68
H.1 General . 68
H.2 Symbol indicating that lamps operate at high temperatures . 68
H.3 Symbol indicating that care should be taken to avoid touching the bulb . 68
H.4 Symbol indicating that the use of protective gloves is advised. 68
H.5 Symbol indicating that lamps with scratched or otherwise damaged bulbs
should not be used . 68
H.6 Symbol indicating that before handling, the lamp shall be switched off . 68
H.7 Symbol indicating that the use of eye protection is advised . 69
H.8 Symbol indicating that during operation, the lamp emits UV-radiation . 69
IEC CDV 60810 © IEC 2026
H.9 Symbol indicating that the lamp shall be operated only in a luminaire with a
protective shield. 69
H.10 Symbol indicating dangerous voltage . 69
H.11 Pictogram for instruction "Non-ECE" . 70
H.12 Pictogram for instruction "Interior lighting only" . 70
Annex I (normative) Luminous flux maintenance test conditions for LED light sources . 72
I.1 Ageing . 72
I.2 Test voltage . 72
I.3 Operating conditions . 72
I.3.1 Test rack . 72
I.3.2 LED light sources with integrated thermal management . 72
I.3.3 LED light sources with external thermal management . 72
I.4 Switching cycle . 73
I.4.1 Single-function LED light sources . 73
I.4.2 Dual-function LED light sources for headlamps . 73
I.4.3 Multiple-function LED light sources for light signalling equipment . 73
I.5 Luminous flux maintenance measurements . 74
I.6 Colour measurement . 74
Annex J (normative) Luminous flux maintenance test conditions for OLED panels . 75
J.1 Operating conditions . 75
J.1.1 Electrical parameters . 75
J.1.2 Test rack . 75
J.1.3 Temperature . 75
J.2 Switching cycles . 75
J.2.1 OLEDs for use in direction indicators . 75
J.2.2 Multiple-function OLEDs for light signalling applications . 75
J.3 Luminous flux maintenance measurements . 76
J.4 Chromaticity coordinates measurements . 76
Bibliography . 77

Figure 1 – Position of the centre of gravity (shaded areas) . 24
Figure 2 – Three white colour groups for discharge lamps . 25
Figure 3 – Extract from IEC 60068-2-14 Test Nb, showing the temperature cycle profile . 29
Figure 4 – Typical electrical circuit for an LR3, LR5, LR6, LY3, LY5, LY6, LW3, LW5 ,
LW6, LW7 and L1/6 LED light source . 31
Figure 5 – Typical electrical circuit for an LR4 LED light source . 31
Figure 6 – Typical electrical circuit for an L2 and L3 LED light source . 32
Figure 7 – Three white colour groups for LED light sources . 37
Figure 8 – Temperature and operating mode of the resistance to vibration. 41
Figure 9 – The power density spectrum (PSD) of the resistance to vibration . 42
Figure B.1 – Recommended equipment layout for vibration testing . 52
Figure C.1 – Diagrammatic sketch of the principle of the test equipment . 53
Figure D.1 – Superposition of on/off switching and power switching cycle . 58
Figure E.1 – Sketch of the test set-up . 60
Figure F.1 – Voltage surges for 12 V filament lamps - Maximum tolerable duration for a
voltage surge as a function of its height . 62
IEC CDV 60810 © IEC 2026
Figure F.2 – Maximum filament lamp outlines H1 . 63
Figure F.3 – Maximum filament lamp outlines H2 . 64
Figure F.4 – Maximum filament lamp outlines H3 . 65
Figure F.5 – Maximum filament lamp outlines P21W, PY21W, P21/4W and P21/5W . 66
Figure H.1 – Pictogram for instruction "Non-ECE" . 70
Figure H.2 – Pictogram for instruction "Interior lighting only" . 71

Table 1 – Conditions of compliance for life B . 18
Table 2 – Conditions of compliance for the vibration test . 18
Table 3 – Rated life values for continuous operation . 19
Table 4 – Rated luminous flux-maintenance values for continuous operation . 21
Table 5 – Three white colour groups, their abbreviation, nominal CCT and CIE x -
coordinate boundary value for discharge lamps . 25
Table 6 – Minimum L B values for replaceable LED light sources . 26
70 10
Table 7 – Typical "on"-times for the different functions per 100 000 km drive distance,
a
based on an average speed of 33,6 km/h . 27
Table 8 – Example of product data . 28
Table 9 – Temperature classes for the powered thermal cycling test . 29
Table 10 – Maximum mass for LED light sources . 29
Table 11 – Maximum power consumption . 32
Table 12 – Minimum current draw at normal operation . 33
Table 13 – ESD packaging, handling (light source not connected) . 34
Table 14 – ESD powered test (light source connected) . 35
Table 15 – Test parameters for PWM operation and luminous flux requirements . 36
Table 16 – Three white colour groups, their abbreviation, nominal CCT and CIE x-
coordinate boundary value for LED light sources . 36
Table 17 – Operating modes and codes . 39
Table 18 – Dark spot limits by level . 40
Table B.1 – Vibration test on motor vehicle lamps - Test conditions . 50
Table B.2 – Vibration test on motor vehicle lamps - Standard test conditions
(narrowband) . 50
Table B.3 – Vibration test on motor vehicle lamps - Heavy-duty test conditions. 51
Table B.4 – Vibration test on motor vehicle lamps - Standard test conditions
(wideband) . 51
Table C.1 – Compression strength . 54
Table C.2 – Inspection by attributes - Double sampling plan . 55
Table C.3 – Inspection by variables - "S" method of assessment . 56
Table D.1 – On/off switching cycle . 57
Table D.2 – Power switching cycle . 58
Table D.3 – Fast power switching cycle . 58
Table G.1 – Open circuit voltage . 67
Table I.1 – Examples of possible product data . 73
Table J.1 – Examples for possible product data . 75

IEC CDV 60810 © IEC 2026
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Lamps, light sources and LED packages for road vehicles - Performance
requirements
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for
standardization comprising all national electrotechnical committees (IEC National Committees).
The object of IEC is to promote international co-operation on all questions concerning
standardization in the electrical and electronic fields. To this end and in addition to other
activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC
Publication(s)"). Their preparation is entrusted to technical committees; any IEC National
Committee interested in the subject dealt with may participate in this preparatory work.
International, governmental and non-governmental organizations liaising with the IEC also
participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as
possible, an international consensus of opinion on the relevant subjects since each technical
committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted
by IEC National Committees in that sense. While all reasonable efforts are made to ensure that
the technical content of IEC Publications is accurate, IEC cannot be held responsible for the
way in which they are used or for any misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC
Publications transparently to the maximum extent possible in their national and regional
publications. Any divergence between any IEC Publication and the corres ponding national or
regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies
provide conformity assessment services and, in some areas, access to IEC marks of conformity.
IEC is not responsible for any services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including
individual experts and members of its technical committees and IEC National Committees for
any personal injury, property damage or other damage of any nature whatsoever, whether direct
or indirect, or for costs (including legal fees) and expenses arising out of the publication, use
of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced
publications is indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve
the use of (a) patent(s). IEC takes no position concerning the evidence, validity or applicability
of any claimed patent rights in respect thereof. As of the date of publication of this document,
IEC [had/had not] received notice of (a) patent(s), which may be required to implement this
IEC CDV 60810 © IEC 2026
document. However, implementers are cautioned that this may not represent the latest
information, which may be obtained from the patent database available at https://patents.iec.ch.
IEC shall not be held responsible for identifying any or all such patent rights.
IEC 60810 has been prepared by subcommittee 34A: Lamps, of IEC technical committee 34:
Lamps and related equipment. It is an International Standard.
This sixth edition cancels and replaces the fifth edition published in 2017. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) introduction of requirements for several new LED light source categories;
b) updating of the requirements for LED light sources;
c) re-writing the requirements for LED package and making reference to AEC Q102
d) introduction of requirements and test methods for OLED light sources.
The text of this International Standard is based on the following documents:
Draft Report on voting
34A/XX/FDIS 34A/XX/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
– reconfirmed,
– withdrawn, or
– revised.
IEC CDV 60810 © IEC 2026
INTRODUCTION
The following reference is to be checked :
United Nations Vehicle Regulations - 1958 Agreement, Agreement concerning the adoption of
uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted
and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals
granted on the basis of these prescriptions (available at
www.unece.org/trans/main/wp29/wp29regs.html)
The following items were listed in the bibliography but not cited in the text. Please find a suitable
place to cite them to justify their inclusion in the bibliography:
IEC 60068-2-20, Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability
and resistance to soldering heat of devices with leadsIEC 60068-2-20 [1]
IEC 60417, Graphical symbols for use on equipmentIEC 60417 [2]
IEC 60809:1995/AMD5:2012 [3]
ISO 3534-2, Statistics - Vocabulary and symbols - Part 2: Applied statisticsISO 3534-2 [4]
ICNIRP, Guidelines on Limits of Exposure to Ultraviolet Radiation of Wavelengths Between 180
nm and 400 nm (Incoherent Optical Radiation). Health Physics 87 (2): 171 -186; 2004[5]
United Nations Vehicle Regulations - 1958 Agreement, Agreement concerning the adoption of
uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted
and/or be used on wheeled vehicles and the conditions for reciprocal rec ognition of approvals
granted on the basis of these prescriptions(available at
www.unece.org/trans/main/wp29/wp29regs.html)[6]
Addendum 36: Regulation No. 37, Uniform provisions concerning the approval of filament lamps
for use in approved lamp units of power-driven vehicles and of their trailers[7]
Addendum 98: UN Regulation No. 99, Uniform provisions concerning the approval of gas -
discharge light sources for use in approved gas-discharge lamp units of power-driven
vehicles[8]
Addendum 127: Regulation No. 128, Uniform provisions concerning the approval of light
emitting diode (LED) light sources for use in approved lamp units on power-driven vehicles and
of their trailers[9]
___________
Also known as The 1958 Agreement. In the text of this document the regulations under this agreement are referred
to as, for example, UN Regulation 37 or R37.
IEC CDV 60810 © IEC 2026
1 Scope
This document is applicable to filament lamps, discharge lamps, LED light sources, LED
packages and OLED light sources to be used in road vehicles, i.e. in headlamps, fog-lamps,
signalling lamps and interior lighting. It is especially applicable to those lamps and light sources
which are listed in IEC 60809:2021.
It specifies requirements and test methods for the measurement of performance characteristics
such as lamp life, luminous flux maintenance, torsion strength, glass bulb strength and
resistance to vibration and shock. Moreover, information on temperature limits, maximum lamp
outlines and maximum tolerable voltage surges is given as guidance for lighting and electrical
equipment design.
For some of the requirements given in this document, reference is made to data given in tables.
For lamps not listed in such tables, the relevant data are supplied by the lamp manufacturer or
responsible vendor.
The performance requirements are additional to the basic requirements specified in IEC
60809:2021. They are, however, not intended to be used by authorities for legal type -approval
purposes.
NOTE 1 In the various vocabularies and standards, different terms are used for "incandescent lamp" (IEC 60050 -
845, 845-07-04) and "discharge lamp" (IEC 60050-845, 845-07-17). In this document, "filament lamp" and "discharge
lamp" are used. However, where only "lamp" is written both types are meant, unless the context clearly shows that
it applies to one type only.
NOTE 2 This document does not apply to luminaires.
NOTE 3 In this document, the term LED light source is used, in other standards the term LED lamps can be used
to describe similar products.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60050-845, International Electrotechnical Vocabulary - Part 845: Lighting (available at
http://www.electropedia.org)
IEC 60061-1, Lamp caps and holders together with gauges for the control of interchangeability
and safety - Part 1: Lamp caps
IEC 60068-2-5, Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at
ground level and guidance for solar radiation testing and weathering
IEC 60068-2-5:2018, Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation
at ground level and guidance for solar radiation testing and weathering
IEC 60068-2-6, Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-14, Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60068-2-27, Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60068-2-43, Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for
contacts and connections
IEC CDV 60810 © IEC 2026
IEC 60068-2-58, Environmental testing - Part 2-58: Tests - Test Td: Test methods for
solderability, resistance to dissolution of metallization and to soldering heat of surface mounting
devices (SMD)
IEC 60068-2-60, Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas
corrosion test
IEC 60809:2021, Lamps and light sources for road vehicles - Dimensional, electrical and
luminous requirements
IEC 62506, Methods for product accelerated testing
ISO 2859-1:2026, Sampling procedures for inspection by attributes — Part 1: Sampling
schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
ISO 7637-2:2011, Road vehicles - Electrical disturbances from conduction and coupling - Part
2: Electrical transient conduction along supply lines only
ISO 10605, Road vehicles - Test methods for electrical disturbances from electrostatic
discharge
CISPR 25, Vehicles, boats and internal combustion engines - Radio disturbance characteristics
- Limits and methods of measurement for the protection of on-board receivers
Addendum 47: Regulation No. 48, Uniform provisions concerning the approval of vehicles with
regard to the installation of lighting and light-signalling devices
Addendum 100: Regulation No. 101, Uniform provisions concerning the approval of passenger
cars powered by an internal combustion engine only, or powered by a hybrid electric power
train with regard to the measurement of the emission of carbon dioxide and fuel consumption
and/or the measurement of electric energy consumption and electric range, and of categories
M1 and N1 vehicles powered by an electric power train only with regard to the measurement of
electric energy consumption and electric range
Addendum 122: Regulation No. 123, Uniform provisions concerning the approval of adaptive
front-lighting systems (AFS) for motor vehicles
AEC Q102
ANSI/ESDA/JEDEC JS-001-2012
ANSI/ESDA/JEDEC JS-001-2012, Joint JEDEC/ESDA standard for electrostatic discharge
sensitivity testing human body model (HBM) - component level
CIE 015:2018, Colorimetry
CIE015, CIE 015
JESD22-A101D
JESD22-A101D, Steady-state temperature humidity bias life test
JESD22-A104E
JESD22-A104E, Temperature cycling
IEC CDV 60810 © IEC 2026
JESD22-A105C
JESD22-A105C, Power and temperature cycling
JESD22-A108F
JESD22-A108F, Temperature, bias, and operating life
JESD22-A115C
JESD22-A115C, Electrostatic discharge (ESD) sensitivity testing machine model (MM)
R.E.5
R.E.5, Consolidated Resolution on the common specification of light source categories
R.E.5 is published by UNECE under the reference ECE/TRANS/WP.29/1127 and is available at
the following address (website checked on 6 March 2019)
http://www.unece.org/trans/main/wp29/wp29wgs/wp29gen/wp29resolutions.html
R101
UN R10
UN R48
UN R123
UN R128
UN R148
UN Regulation R48
United Nations Vehicle Regulations - 1958 Agreement, Agreement concerning the adoption of
uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted
and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals
granted on the basis of these prescriptions (available at
www.unece.org/trans/main/wp29/wp29regs.html )
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 60050 -845 and IEC
60809:2021, and the following apply.
ISO and IEC maintain ter
...