EN IEC 60810:2018/A2:2022
(Amendment)Lamps, light sources and LED packages for road vehicles - Performance requirements
Lamps, light sources and LED packages for road vehicles - Performance requirements
Lampen, Lichtquellen und LED-Packages für Straßenfahrzeuge - Anforderungen an die Arbeitsweise
Lampes, sources lumineuses et LED encapsulées pour véhicules routiers - Exigences de performances
Sijalke, viri svetlobe in okrovi svetlečih diod (LED) za cestna vozila - Tehnične zahteve - Dopolnilo A2 (IEC 60810:2017/AMD2:2022)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2022
Sijalke, viri svetlobe in okrovi svetlečih diod (LED) za cestna vozila - Tehnične
zahteve - Dopolnilo A2 (IEC 60810:2017/AMD2:2022)
Lamps, light sources and LED packages for road vehicles - Performance requirements
(IEC 60810:2017/AMD2:2022)
Lampen, Lichtquellen und LED-Packages für Straßenfahrzeuge - Anforderungen an die
Arbeitsweise (IEC 60810:2017/AMD2:2022)
Lampes, sources lumineuses et LED encapsulées pour véhicules routiers - Exigences
de performances (IEC 60810:2017/AMD2:2022)
Ta slovenski standard je istoveten z: EN IEC 60810:2018/A2:2022
ICS:
29.140.20 Žarnice z žarilno nitko Incandescent lamps
43.040.20 Naprave za osvetlitev, Lighting, signalling and
signalizacijo in opozarjanje warning devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60810:2018/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2022
ICS 29.140.99
English Version
Lamps, light sources and LED packages for road vehicles -
Performance requirements
(IEC 60810:2017/AMD2:2022)
Lampes, sources lumineuses et LED encapsulées pour Lampen, Lichtquellen und LED-Packages für
véhicules routiers - Exigences de performances Straßenfahrzeuge - Anforderungen an die Arbeitsweise
(IEC 60810:2017/AMD2:2022) (IEC 60810:2017/AMD2:2022)
This amendment A2 modifies the European Standard EN IEC 60810:2018; it was approved by CENELEC on 2022-06-02. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60810:2018/A2:2022 E
European foreword
The text of document 34A/2272/FDIS, future IEC 60810/AMD2, prepared by SC 34A "Electric light
sources" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60810:2018/A2:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-03-02
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-06-02
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60810:2017/AMD2:2022 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Replace the reference to IEC 60809:2014 with the following reference:
Publication Year Title EN/HD Year
IEC 60809 2021 Lamps and light sources for road vehicles - EN IEC 60809 2021
Dimensional, electrical and luminous
requirements
IEC 60810 ®
Edition 5.0 2022-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 2
AM ENDEMENT 2
Lamps, light sources and LED packages for road vehicles – Performance
requirements
Lampes, sources lumineuses et LED encapsulées pour véhicules routiers –
Exigences de performances
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-1101-8
– 2 – IEC 60810:2017/AMD2:2022
© IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LAMPS, LIGHT SOURCES AND LED PACKAGES FOR
ROAD VEHICLES – PERFORMANCE REQUIREMENTS
AMENDMENT 2
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.