EN 60512-13-1:2006

Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces

Details a standard test method to measure the force to fully engage or separate mating connectors, including the effect of any locking, latching, sealing, engaging, separating or similar device, that assists or resists such operation.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 13-1: Prüfungen der mechanischen Bedienbarkeit - Prüfung 13a: Kupplungs- und Trennkraft

Connecteurs pour équipements électroniques - Essais et mesures - Partie 13-1: Essais de fonctionnement mécanique - Essai 13a: Forces d'accouplement et de désaccouplement

Précise une méthode d'essai normalisée pour mesurer la force pour insérer ou extraire complètement les connecteurs d'accouplement, y compris l'effet de tout dispositif de verrouillage, d'étanchéité, de scellement, d'insertion, d'extraction ou dispositif analogue, qui aide ou résiste à une telle opération.

Konektorji za elektronsko opremo – Preskusi in meritve – 13-1. del: Mehansko preskušanje – Preskus 13a: Sile za stikanje in raztikanje (IEC 60512-13-1:2006)

General Information

• Status: Published
• Publication Date: 23-Mar-2006
• Withdrawal Date: 28-Feb-2009
• ICS: 31.220.01 - Electromechanical components in general
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 24-Mar-2006
• Completion Date: 24-Mar-2006
• Ref Project: SIST EN 60512-13-1:2006 - Connectors for electronic equipment - Tests and measurements -- Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces

Relations

• Replaces: EN 60512-13-1:1997 - Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 13: Mechanical operating tests - Section 1: Test 13a: Engaging and separating forces
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60512-13-1:2006

STANDARD
julij 2006
Konektorji za elektronsko opremo – Preskusi in meritve – 13-1. del: Mehansko
preskušanje – Preskus 13a: Sile za stikanje in raztikanje (IEC 60512-13-1:2006)
Connectors for electronic equipment - Tests and measurements - Part 13-1:
Mechanical operation tests - Test 13a: Engaging and separating forces (IEC 60512-
13-1:2006)
ICS 31.220.10 Referenčna številka
SIST EN 60512-13-1:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60512-13-1

NORME EUROPÉENNE
March 2006
EUROPÄISCHE NORM

ICS 31.220.01 Supersedes EN 60512-13-1:1997


English version


Connectors for electronic equipment -
Tests and measurements
Part 13-1: Mechanical operation tests -
Test 13a: Engaging and separating forces
(IEC 60512-13-1:2006)


Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Essais et mesures Mess- und Prüfverfahren
Partie 13-1: Essais de fonctionnement Teil 13-1: Prüfungen der mechanischen
mécanique - Bedienbarkeit -
Essai 13a: Forces d'accouplement Prüfung 13a: Kupplungs- und Trennkraft
et de désaccouplement (IEC 60512-13-1:2006)
(CEI 60512-13-1:2006)




This European Standard was approved by CENELEC on 2006-03-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-13-1:2006 E

---------------------- Page: 2 ----------------------

EN 60512-13-1:2006 - 2 -
Foreword
The text of document 48B/1581/FDIS, future edition 2 of IEC 60512-13-1, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60512-13-1 on 2006-03-01.
This European Standard supersedes EN 60512-13-1:1997.
This standard is to be read in conjunction with EN 60512-1 and EN 60512-1-100 which explains the
structure of the EN 60512 series.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-03-01
This European Standard makes reference to International Standards. Where the International Standard
referred to has been endorsed as a European Standard or a home-grown European Standard exists, this
European Standard shall be applied instead. Pertinent information can be found on the CENELEC web
site.
__________
Endorsement notice
The text of the International Standard IEC 60512-13-1:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

NORME CEI
INTERNATIONALE
IEC



60512-13-1
INTERNATIONAL


Deuxième édition
STANDARD

Second edition

2006-02


Connecteurs pour équipements électroniques –
Essais et mesures –
Partie 13-1:
Essais de fonctionnement mécanique –
Essai 13a: Forces d'accouplement
et de désaccouplement

Connectors for electronic equipment –
Tests and measurements –
Part 13-1:
Mechanical operation tests –
Test 13a: Engaging and separating forces
 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que
...