Connectors for electrical and electronic equipment - Product Requirements - Part 2-012: Circular connectors - Detail specification for connectors with inner push-pull locking based on M12 connector interfaces according to IEC 61076-2-101, IEC 61076-2-109, IEC 61076-2-111 and IEC 61076-2-113

IEC 61076-2-012:2020 specifies circular connectors with an inner push‑pull locking mechanism of a size derived from and thus being compatible with M12 screw‑locking connectors and with mating interfaces according to IEC 61076‑2‑101, IEC 61076‑2‑109, IEC 61076‑2‑111 and IEC 61076‑2‑113. A female fixed connector with inner push-pull locking according to this document is intermateable with a correspondingly coded male free connector with M12 screw-locking according to IEC 61076-2-101, IEC 61076-2-109, IEC 61076-2-111 or IEC 61076-2-113. This document covers both: a) power connectors with current ratings up to 16 A and voltage ratings up to 630 V, typically used for power supply of electrical equipment used in industrial premises, and b) connectors for data and signal transmission with frequencies up to 500 MHz. These connectors consist of both fixed and free connectors, either rewirable or non‑rewirable, with M12 inner push‑pull locking as explained above. Male connectors have round contacts from Ø0,6 mm up to Ø1,5 mm. This document covers various types of connectors identified by their "codings" with different contact arrangement, not mutually interchangeable. The design of the inner push‑pull mechanism prevents the unintended mating of the male inner push‑pull free connector with the female connector with M12 screw‑locking even for identical coding. Some styles of free connectors with female contacts covered in this document are equipped with both inner and outer push-pull locking for intermateability also with correspondingly coded male fixed or free connectors according to IEC 61076-2-010.

Steckverbinder für elektrische und elektronische Einrichtungen - Produktanforderungen - Teil 2-012: Rundsteckverbinder - Bauartspezifikation für Steckverbinder mit innerer Push-pull-Verriegelung auf Basis Steckverbindern mit Schraubverriegelungen M12 nach IEC 61076-2-101, IEC 61076-2-109, IEC 61076-2-111 und IEC 61076-2-113

Connecteurs pour équipements électriques et électroniques - Exigences de produit - Partie 2-012 : Connecteurs circulaires - Spécification particulière relative aux connecteurs avec verrouillage interne de type pousser-tirer fondée sur les interfaces de connecteur M12 conformément à l’IEC 61076-2-101, l’IEC 61076-2-109, l’IEC 61076-2-111 et l’IEC 61076 -2-113

IEC 61076-2-012:2020 décrit les connecteurs circulaires équipés d’un mécanisme de verrouillage interne de type pousser-tirer dérivé des connecteurs à verrouillage à vis M12 et par conséquent compatible avec ces derniers, et avec des interfaces d’accouplement conformément à l’IEC 61076-2-101, l’IEC 61076-2-109, l’IEC 61076-2-111 et l’IEC 61076-2-113. Une embase femelle équipée d’un verrouillage interne de type pousser-tirer conformément au présent document est accouplable à une fiche mâle codée en conséquence avec verrouillage à vis M12 conformément à l’IEC 61076-2-101, l’IEC 61076-2-109, l’IEC 61076-2-111 ou l’IEC 61076-2-113. Le présent document couvre à la fois: a) les connecteurs d’alimentation avec des caractéristiques assignées de courant de 16 A maximum et des caractéristiques assignées de tension de 630 V maximum, généralement utilisés pour l'alimentation des équipements électriques utilisés dans les locaux industriels, et b) les connecteurs pour la transmission de données et de signal avec des fréquences maximales de 500 MHz. Ces connecteurs se composent à la fois d’embases et de fiches, démontables ou non, avec verrouillage interne M12 de type pousser-tirer, comme cela est expliqué ci-dessus. Les connecteurs mâles possèdent des contacts arrondis de 0,60 mm à 1,5 mm de diamètre. Le présent document couvre plusieurs types de connecteurs identifiés par leurs "codages" et présentant différentes dispositions de contact non interchangeables. La conception du mécanisme interne de type pousser-tirer empêche l’accouplement fortuit de la fiche interne de type pousser-tirer mâle au connecteur femelle avec verrouillage à vis M12, même pour un codage identique. Certains modèles de fiches à contacts femelles couverts dans le présent document sont équipés d'un verrouillage interne et externe de type pousser-tirer pour une compatibilité d’accouplement, ainsi que de fiches ou embases mâles codés en conséquence, conformément à l’IEC 61076-2-010.

Konektorji za električno in elektronsko opremo - Zahteve za izdelek - 2-012. del: Okrogli konektorji - Podrobna specifikacija za konektorje z notranjim potisnim zaklepanjem na podlagi vmesnikov M12 v skladu z IEC 61076-2-101, IEC 61076-2-109, IEC 61076-2-111 in IEC 61076-2-113 (IEC 61076-2-012:2020)

General Information

Status
Published
Publication Date
10-Sep-2020
Technical Committee
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
11-Sep-2020
Completion Date
11-Sep-2020

Buy Standard

Standard
EN IEC 61076-2-012:2020
English language
65 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61076-2-012:2020
01-november-2020
Konektorji za električno in elektronsko opremo - Zahteve za izdelek - 2-012. del:
Okrogli konektorji - Podrobna specifikacija za konektorje z notranjim potisnim
zaklepanjem na podlagi vmesnikov M12 v skladu z IEC 61076-2-101, IEC 61076-2-
109, IEC 61076-2-111 in IEC 61076-2-113 (IEC 61076-2-012:2020)
Connectors for electrical and electronic equipment - Product Requirements - Part 2-012:
Circular connectors - Detail specification for connectors with inner push-pull locking
based on M12 connector interfaces according to IEC 61076-2-101, IEC 61076-2-109,
IEC 61076-2-111 and IEC 61076-2-113 (IEC 61076-2-012:2020)
Steckverbinder für elektrische und elektronische Einrichtungen - Produktanforderungen –
Teil 2-012: Rundsteckverbinder – Bauartspezifikation für Steckverbinder mit innerer
Push-pull-Verriegelung auf Basis Steckverbindern mit Schraubverriegelungen M12 nach
IEC 61076-101, IEC 61076-109, IEC 61076-111 und IEC 61076-113 (IEC 61076-2-
012:2020)
Connecteurs pour équipements électriques et électroniques - Exigences de produit -
Partie 2-012 : Connecteurs circulaires - Spécification particulière relative aux
connecteurs avec verrouillage interne de type pousser-tirer fondée sur les interfaces de
connecteur M12 conformément à l’IEC 61076-2-101, l’IEC 61076-2-109, l’IEC 61076-2-
111 et l’IEC 61076 -2-113 (IEC 61076-2-012:2020)
Ta slovenski standard je istoveten z: EN IEC 61076-2-012:2020
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
SIST EN IEC 61076-2-012:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61076-2-012:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 61076-2-012:2020


EUROPEAN STANDARD EN IEC 61076-2-012

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2020
ICS 31.220.10

English Version
Connectors for electrical and electronic equipment - Product
Requirements - Part 2-012: Circular connectors - Detail
specification for connectors with inner push-pull locking based
on M12 connector interfaces according to IEC 61076-2-101, IEC
61076-2-109, IEC 61076-2-111 and IEC 61076-2-113
(IEC 61076-2-012:2020)
Connecteurs pour équipements électriques et électroniques Steckverbinder für elektrische und elektronische
- Exigences de produit - Partie 2-012 : Connecteurs Einrichtungen - Produktanforderungen - Teil 2-012:
circulaires - Spécification particulière relative aux Rundsteckverbinder - Bauartspezifikation für
connecteurs avec verrouillage interne de type pousser-tirer Steckverbinder mit innerer Push-pull-Verriegelung auf Basis
fondée sur les interfaces de connecteur M12 conformément Steckverbindern mit Schraubverriegelungen M12 nach IEC
à l'IEC 61076-2-101, l'IEC 61076-2-109, l'IEC 61076-2-111 61076-101, IEC 61076-109, IEC 61076-111 und IEC
et l'IEC 61076 -2-113 61076-113
(IEC 61076-2-012:2020) (IEC 61076-2-012:2020)
This European Standard was approved by CENELEC on 2020-08-31. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61076-2-012:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61076-2-012:2020
EN IEC 61076-2-012:2020 (E)
European foreword
The text of document 48B/2813/FDIS, future edition 1 of IEC 61076-2-012, prepared by SC 48B
"Electrical connectors" of IEC/TC 48 "Electrical connectors and mechanical structures for electrical
and electronic equipment" was submitte
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.