Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 2: Ageing test and destruction test

Applies to capacitors according to EN 60931-1 and gives the requirements for the ageing test and destruction test for these capacitors. The two ageing test methods are intended to ensure that the capacitor case temperature is maintained constant during the test. The destruction test is performed to evaluate the behaviour of the capacitor at the end of its life.

Nichtselbstheilende Leistungs-Parallelkondensatoren für Wechselstromanlagen mit einer Nennspannung bis 1 kV - Teil 2: Alterungs- und Zerstörungsprüfung

Condensateurs shunt de puissance non autorégénérateurs destinés à être utilisés sur des réseaux à courant alternatif de tension assignée inférieure ou égale à 1 kV - Partie 2: Essais de vieillissement, et de destruction

S'applique aux condensateurs conformes à la EN 60931-1 et contient les prescriptions relatives aux essais de vieillissement et de destruction de ces condensateurs. Les deux méthodes d'essai de vieillissement sont destinées à assurer que la température de la cuve du condensateur demeure constante pendant l'essai. L'essai de destruction est réalisé pour évaluer le comportement du condensateur en fin de vie.

Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV -- Part 2: Ageing test and destruction test (IEC 60931-2:1995)

General Information

Status
Published
Publication Date
18-Mar-1996
Withdrawal Date
30-Nov-1996
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
6060 - Document made available - Publishing
Start Date
19-Mar-1996
Completion Date
19-Mar-1996

Buy Standard

Standard
EN 60931-2:1999
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60931-2:1999
01-julij-1999
Shunt power capacitors of the non-self-healing type for a.c. systems having a
rated voltage up to and including 1 kV -- Part 2: Ageing test and destruction test
(IEC 60931-2:1995)
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated
voltage up to and including 1 kV -- Part 2: Ageing test and destruction test
Nichtselbstheilende Leistungs-Parallelkondensatoren für Wechselstromanlagen mit einer
Nennspannung bis 1 kV -- Teil 2: Alterungs- und Zerstörungsprüfung
Condensateurs shunt de puissance non autorégénérateurs destinés à être utilisés sur
des réseaux à courant alternatif de tension assignée inférieure ou égale à 1 kV -- Partie
2: Essais de vieillissement, et de destruction
Ta slovenski standard je istoveten z: EN 60931-2:1996
ICS:
31.060.70 0RþQRVWQLNRQGHQ]DWRUML Power capacitors
SIST EN 60931-2:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60931-2:1999

---------------------- Page: 2 ----------------------

SIST EN 60931-2:1999

---------------------- Page: 3 ----------------------

SIST EN 60931-2:1999

---------------------- Page: 4 ----------------------

SIST EN 60931-2:1999

---------------------- Page: 5 ----------------------

SIST EN 60931-2:1999

---------------------- Page: 6 ----------------------

SIST EN 60931-2:1999
NORME CEI
INTERNATIONALE
IEC
931-2
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
1995-12
Condensateurs shunt de puissance
non autorégénérateurs destinés à être utilisés
sur des réseaux à courant alternatif de
tension assignée inférieure ou égale à 1 000 V –
Partie 2:
vieillissement et de destruction
Essais de
Shunt power capacitors of the non-self-healing
type for a.c. systems having a rated voltage up to
and including 1 000 V –
Part 2:
Ageing test and destruction test
CEI 1995 Droits de reproduction réservés — Copyright — all rights reserved
©
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
any form or by any means, electronic or mechanical,
utilisée sous quelque forme que ce soit et par aucun pro-
cédé, électronique ou mécanique, y compris la photocopie et including photocopying and microfilm, without permission
les microfilms, sans l'accord écrit de l'éditeur. in writing from the publisher.
Bureau Central de la Commission Electrotechnique Internationale 3, rue de Varembé Genève, Suisse
Commission Electrotechnique Internationale CODE PRIX
International Electrotechnical Commission
PRICE CODE J
Me>tutyt+apoaI4aa 3neftrporexHHVect+aa
IEC HoMHCa+n
• Pour prix, voir catalogue en vigueur

For price, see current catalogue

---------------------- Page: 7 ----------------------

SIST EN 60931-2:1999
- 3 -
931-2 ©I EC:1995
CONTENTS
Page
FOREWORD 5
Clause
SECTION 1: GENERAL
1 Scope 7
2 Normative references 7
SECTION 2: QUALITY REQUIREMENTS AND TESTS
17 Ageing test
11
18 Self-healing test
11
19 Destruction test

---------------------- Page: 8 ----------------------

SIST EN 60931-2:1999
- 5 -
931-2 ©I EC:1995
INTERNATIONAL ELECTROTECHNICAL COMMISSION
-HEALING TYPE
SHUNT POWER CAPACITORS OF THE NON-SELF
FOR A.C. SYSTEMS HAVING A
RATED VOLTAGE UP TO AND INCLUDING 1 000 V –
Part 2: Ageing test and destruction test
FOREWORD
The IEC (International Electrotechnical Commission) is a worldwide organization for standardization
1)
comprising all national electrotechnical committees (IEC National Committees). The object of the 1EC is to
promote international cooperation on all questions concerning standardization in the electrical and
electronic fields. To this end and in addition to other activities, the IEC publishes International Standards.
Their preparation is entrusted to technical committees; any IEC National Committee interested in
the subject dealt with may participate in this preparatory work. International, governmental and
non-governmental organizations liaising with the IEC also participate in this preparation. The IEC
collaborates closely with the International Organization for Standardization (ISO) in accordance with
conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of the IEC on technical matters, express as nearly as possible an
international consensus of opinion on the relevant subjects since each technical committee has
representation from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the
form of standards, technical reports or guides and they are accepted by the National Committees in that
sense.
In order to promote international unification, IEC National Committees undertake to apply IEC International
4)
Standards transparently to the maximum extent possible in their national and regio
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.