EN 50193-2-2:2016

Electric instantaneous water heaters - Part 2-2: Performance requirements - Single point of use electric instantaneous showers - Efficiency

This clause of part 1 is applicable except as follows. Addition: This standard applies to open outlet, single point of use, electric instantaneous water heaters intended for household or similar use, for showering purposes without downstream mixing. This standard only specifies tests for the assessment of energy efficiency. This standard does not apply to electrical instantaneous water heaters covered by other parts of this series of standards.

Elektro-Durchfluss-Wassererwärmer - Teil 2-2: Anforderungen an die Gebrauchseigenschaften - Durchfluss-Wassererwärmer für eine einzelne Zapfstelle - Effizienz

Chauffe-eau électriques instantanés - Partie 2-2 : Exigences d’aptitude à la fonction - Chauffe-eau instantanés de douches à un seul point d'utilisation - Efficacité.

L’article de la partie 1 est applicable avec les exceptions suivantes. Addition: La présente norme s'applique aux chauffe-eau électriques instantanés à écoulement libre, un seul point d'utilisation, destinés à des usages domestiques et analogues, prévus pour les douches sans mitigeur situé en aval. La présente norme spécifie uniquement les essais relatifs à l'évaluation de l'efficacité énergétique. La présente norme n'est pas applicable aux chauffe-eau électriques instantanés couverts par d'autres parties de la présente série de normes.

Električni pretočni grelniki vode - 2-2. del: Zahtevane lastnosti - Električni pretočni grelniki vode za uporabo na enem mestu - Učinkovitost

Ta točka 1. dela se uporablja, razen kot sledi.
Dodatek:
Ta standard se uporablja za odprte električne pretočne grelnike vode za uporabo na enem mestu v gospodinjstvih ali podobnih okoljih za namene tuširanja brez mešanja v smeri toka.
Ta standard zgolj določa preskuse za oceno energijske učinkovitosti.
Ta standard se ne uporablja za električne pretočne grelnike vode, ki so zajeti v drugih delih te skupine standardov.

General Information

• Status: Published
• Publication Date: 22-Dec-2016
• ICS: 91.140.65 - Water heating equipment
• Technical Committee: CLC/TC 59X - Consumer information related to household electrical appliances
• Drafting Committee: CLC/TC 59X - Consumer information related to household electrical appliances
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 07-Jul-2021
• Directive: 2009/125/EC - Directive 2005/32/EC of the European Parliament and of the Council of 6 July 2005 establishing a framework for the setting of ecodesign requirements for energy-using products and amending Council Directive 92/42/EEC and Directives 96/57/EC and 2000/55/EC of the European Parliament and of the Council
• Directive: 812/2013 - Commission Delegated Regulation (EU) No 812/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of water heaters, hot water storage tanks and packages of water heater and solar device
• Directive: 813/2013 - Commission Regulation (EU) No 813/2013 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for space heaters and combination heaters
• Directive: 814/2013 - Commission Regulation (EU) No 814/2013 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for water heaters and hot water storage tanks
• Mandate: M/495 - Standardisation mandate to CEN, CENELEC and ETSI under Directive 2009/125/EC relating to harmonised standards in the field of Ecodesign
• Mandate: M/534 - [C(2015)2625] Standardisation request to the European standardisation organisations pursuant to Article 10(1) of Regulation (EU) No 1025/2012 of the European Parliament and of the Council in support of implementation of Commission Regulation (EU) No 814/2013 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for water heaters and hot water storage tanks and Commission Delegated Regulation (EU) No 812/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of water heaters, hot water storage tanks and packages of water heater and solar device
• Ref Project: SIST EN 50193-2-2:2017 - Electric instantaneous water heaters - Part 2-2: Performance requirements - Single point of use electric instantaneous showers - Efficiency

Relations

• Amended By: EN 50193-2-2:2016/A1:2020 - Electric instantaneous water heaters - Part 2-2: Performance requirements - Single point of use electric instantaneous showers - Efficiency
• Effective Date: 30-Jun-2020

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektro-Durchfluss-Wassererwärmer - Teil 2-2: Anforderungen an die Gebrauchseigenschaften - Durchfluss-Wassererwärmer für eine einzelne Zapfstelle - EffizienzChauffe-eau
électriques instantanés - Partie 2-2 : Exigences d’aptitude à la fonction - Chauffe-eau instantanés de douches à un seul point d'utilisation - EfficacitéElectric instantaneous water heaters - Part 2-2: Performance requirements - Single point of use electric instantaneous showers - Efficiency97.100.10Electric heaters91.140.65Oprema za ogrevanje vodeWater heating equipmentICS:Ta slovenski standard je istoveten z:EN 50193-2-2:2016SIST EN 50193-2-2:2017en,fr01-februar-2017SIST EN 50193-2-2:2017SLOVENSKI
STANDARD



SIST EN 50193-2-2:2017



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 50193-2-2
December 2016 ICS 91.140.65 English Version
Electric instantaneous water heaters - Part 2-2: Performance requirements - Single point of use electric instantaneous showers - Efficiency
Chauffe-eau
électriques instantanés - Partie 2-2 : Exigences d'aptitude à la fonction - Chauffe-eau instantanés de douches à un seul point d'utilisation - Efficacité.
Elektro-Durchfluss-Wassererwärmer - Teil 2-2: Anforderungen an die Gebrauchseigenschaften - Durchfluss-Wassererwärmer für eine einzelne Zapfstelle - Effizienz This European Standard was approved by CENELEC on 2016-10-10. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50193-2-2:2016 ESIST EN 50193-2-2:2017



EN 50193-2-2:2016
2
Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions. 4 4 General test conditions . 4 5 Energy efficiency . 4 5.1 Test method . 4 Annex A (normative)
Load pattern . 6 Annex B (normative)
Test Set Up. 7 Annex ZZA (informative)
Relationship between this European Standard and the energy labelling requirements of Commission Delegated Regulation (EU) No 812/2013 aimed to be covered. 9 Annex ZZB (informative)
Relationship between this European Standard and the ecodesign requirements of Commission Regulation (EU) No 814/2013 aimed to be covered . 10 Bibliography .
...