EN 60317-0-4:1998/A2:2005

Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-4: Allgemeine Anforderungen - Flachdrähte aus Kupfer, blank oder lackisoliert und umhüllt mit Glasgewebe, imprägniert mit Harz oder Lack

Spécifications pour types particuliers de fils de bobinage - Partie 0-4: Prescriptions générales - Fil de section rectangulaire en cuivre nu ou émaillé guipé de fibres de verre imprégnées de vernis ou de résine

Specifikacije za posebne vrste navijalnih žic - 0-4. del: Splošne zahteve - Bakrena žica s pravokotnim prerezom, gola ali emajlirana, ovita z optičnimi vlakni in impregnirana s smolo ali lakom (IEC 60317-0-4:1997/A2:2005)

General Information

• Status: Withdrawn
• Publication Date: 06-Dec-2005
• Withdrawal Date: 31-Oct-2008
• ICS: 29.060.10 - Wires
• Technical Committee: CLC/TC 55 - Winding wires
• Drafting Committee: IEC/TC 55 - IEC_TC_55
• Parallel Committee: IEC/TC 55 - IEC_TC_55
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 27-Nov-2018
• Completion Date: 27-Nov-2018
• Ref Project: SIST EN 60317-0-4:2001/A2:2006 - Specifications for particular types of winding wires -- Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire

Relations

• Replaced By: EN 60317-0-4:2016 - Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire
• Effective Date: 26-Jan-2016
• Amends: EN 60317-0-4:1998 - Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire
• Effective Date: 28-Jan-2023

Standards Content (Sample)

55/925/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJET DE COMITÉ POUR VOTE (CDV)

Project number IEC 60317-0-4, A2 Ed. 2
Numéro de projet
IEC/TC or SC: Date of circulation Closing date for voting (Voting
TC 55
Date de diffusion mandatory for P-members)
CEI/CE ou SC:

Date de clôture du vote (Vote
2004-11-19
obligatoire pour les membres (P))
2005-04-22
Titre du CE/SC: Fils de bobinage TC/SC Title: Winding Wires
Secretary: M. LEIBOWITZ - USA
       E-Mail: [e-mail]
Also of interest to the following committees Supersedes document
Intéresse également les comités suivants Remplace le document
   55/899/CD - 55/912/CC
Functions concerned
Fonctions concernées
Safety EMC Environment Quality assurance
Sécurité
CEM Environnement Assurance qualité
CE DOCUMENT EST TOUJOURS À L'ÉTUDE ET SUSCEPTIBLE DE THIS DOCUMENT IS STILL UNDER STUDY AND SUBJECT TO CHANGE. IT
MODIFICATION. IL NE PEUT SERVIR DE RÉFÉRENCE. SHOULD NOT BE USED FOR REFERENCE PURPOSES.
LES RÉCIPIENDAIRES DU PRÉSENT DOCUMENT SONT INVITÉS À RECIPIENTS OF THIS DOCUMENT ARE INVITED TO SUBMIT, WITH THEIR
PRÉSENTER, AVEC LEURS OBSERVATIONS, LA NOTIFICATION DES COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF
DROITS DE PROPRIÉTÉ DONT ILS AURAIENT ÉVENTUELLEMENT WHICH THEY ARE AWARE AND TO PROVIDE SUPPORTING
CONNAISSANCE ET À FOURNIR UNE DOCUMENTATION EXPLICATIVE. DOCUMENTATION.



Titre : Amendement 2 à la CEI 60317-0-4, Ed. 2: Title : Amendment 2 to IEC 60317-0-4, Ed. 2:
Spécifications pour types particuliers de fils de Specifications for particular types of winding
bobinage – Partie 0-4: Prescriptions générales – wire – Part 0-4: General requirements – Glass-
Fil de section rectangulaire en cuivre nu ou fibre wound resin or varnish impregnated, bare
émaillé guipé de fibres de verre imprégnées de or enamelled rectangular copper wire
vernis ou de résine




Note d'introduction Introductory note

La révision la plus importante proposée dans ce The most critical revision proposed in this CDV
CDV est la révision de la Table 4 pour is the revised in Table 4 for increase in
l’accroissement des dimensions. dimensions.

ATTENTION ATTENTION

CDV soumis en parallèle au vote (CEI) Parallel IEC CDV/CENELEC Enquiry
et à l’enquête (CENELEC)

Copyright © 2004 International Electrotechnical Commission, IEC. All rights reserved. It is
permitted to download this electronic file, to make a copy and to print out the content for the sole
purpose of preparing National Committee positions. You may not copy or "mirror" the file or
printed version of the document, or any part of it, for any other purpose without permission in
writing from IEC.
FORM CDV (IEC)
2002-08-09

---------------------- Page: 1 ----------------------

2
60317-0-4, A2 Ed. 2 © IEC
INTERNATIONAL ELECTROTECHNICAL COMMISSION
__________

SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES –

Part 0-4: General requirements –
Glass-fibre wound resin or varnish impregnated,
bare or enamelled rectangular copper wire



FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national
electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all
questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, the
IEC publishes International Standards. Their preparation is entrusted to technical committees; any IEC National Committee
interested in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with the
International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all interested National
Committees.
3) The documents produced have the form of recommendations for international use and are published in the form of standards,
technical specifications, technical reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International Standards
transparently to the maximum extent possible in their national and regional standards. Any divergence between the IEC
Standard and the corresponding national or regional standard shall be clearly indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment
declared to be in conformity with one of its standards.
...

SLOVENSKI STANDARD
SIST EN 60317-0-4:2001/A2:2006
01-februar-2006
6SHFLILNDFLMH]DSRVHEQHYUVWHQDYLMDOQLKåLFGHO6SORãQH]DKWHYH%DNUHQD
åLFDVSUDYRNRWQLPSUHUH]RPJRODDOLHPDMOLUDQDRYLWD]RSWLþQLPLYODNQLLQ
LPSUHJQLUDQDVVPRORDOLODNRP,(&$
Specifications for particular types of winding wires -- Part 0-4: General requirements -
Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper
wire
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten -- Teil 0-4:
Allgemeine Anforderungen - Flachdrähte aus Kupfer, blank oder lackisoliert und umhüllt
mit Glasgewebe, imprägniert mit Harz oder Lack
Spécifications pour types particuliers de fils de bobinage -- Partie 0-4: Prescriptions
générales - Fil de section rectangulaire en cuivre nu ou émaillé guipé de fibres de verre
imprégnées de vernis ou de résine
Ta slovenski standard je istoveten z: EN 60317-0-4:1998/A2:2005
ICS:
29.060.10 Žice Wires
SIST EN 60317-0-4:2001/A2:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60317-0-4:2001/A2:2006

---------------------- Page: 2 ----------------------

SIST EN 60317-0-4:2001/A2:2006
EUROPEAN STANDARD EN 60317-0-4/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2005

ICS 29.060.10


English version


Specifications for particular types of winding wires
Part 0-4: General requirements –
Glass-fibre wound, resin or varnish impregnated,
bare or enamelled rectangular copper wire
(IEC 60317-0-4:1997/A2:2005)


Spécifications pour types particuliers  Technische Lieferbedingungen für
de fils de bobinage bestimmte Typen von Wickeldrähten
Partie 0-4: Prescriptions générales – Teil 0-4: Allgemeine Anforderungen -
Fil de section rectangulaire en cuivre nu Flachdrähte aus Kupfer, blank oder
ou émaillé guipé de fibres de verre lackisoliert und umhüllt mit Glasgewebe,
imprégnées de vernis ou de résine imprägniert mit Harz oder Lack
(CEI 60317-0-4:1997/A2:2005) (IEC 60317-0-4:1997/A2:2005)


This amendment A2 modifies the European Standard EN 60317-0-4:1998; it was approved by CENELEC
on 2005-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60317-0-4:1998/A2:2005 E

---------------------- Page: 3 ----------------------

SIST EN 60317-0-4:2001/A2:2006
EN 60317-0-4:1998/A2:2005 - 2 -
Foreword
The text of document 55/968/FDIS, future amendment 2 to IEC 60317-0-4:1997, prepared by
IEC TC 55, Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as amendment A2 to EN 60317-0-4:1998 on 2005-11-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-08-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2008-11-01
__________
Endorsement notice
The text of amendment 2:2005 to the International Standard IEC 60317-0-4:1997 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60317-0-4:2001/A2:2006
NORME CEI
INTERNATIONALE
IEC



60317-0-4
INTERNATIONAL


1997
STANDARD


AMENDEMENT 2
AMENDMENT 2

2005-11

Amendement 2
Spécifications pour types particuliers
de fils de bobinage –
Partie 0-4: Prescriptions générales –
Fil de section rectangulaire en cuivre nu ou émaillé
guipé de fibres de verre imprégnées
de vernis ou d
...