Ferrite cores - Dimensions - Part 11: EC-cores for use in power supply applications

IEC 62317-11:2015 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of EC-cores, the essential dimensions of coil formers to be used with them, and the effective parameter values to be used in calculations involving them. This first edition cancels and replaces the first edition of IEC 60647 published in 1979. This edition constitutes a technical revision and includes the following significant technical changes with respect to the first edition of IEC 60647: - addition of EC90 and EC120 cores in Table 1, - addition of effective parameter and Amin values and main dimensions of coil formers for EC90 and EC120 cores.

Ferritkerne - Maße - Teil 11: EC-Kerne für den Einsatz in Netzteilen

Noyaux ferrites - Dimensions - Partie 11: Noyaux EC utilisés dans des applications d’alimentation électrique

L'IEC 62317-11:2015 spécifie les dimensions qui revêtent une importance particulière pour l'interchangeabilité mécanique pour une plage préférentielle de noyaux EC, les dimensions essentielles des carcasses à utiliser avec ces noyaux et les valeurs des paramètres effectifs à utiliser pour les calculs qui s'y rapportent. Cette première édition annule et remplace la première édition de l'IEC 60647 parue en 1979. Cette édition constitue une révision technique et inclut les modifications techniques majeures suivantes par rapport à la première édition de l'IEC 60647: - ajout des noyaux EC90 et EC120 dans le Tableau 1, - ajout des valeurs de paramètres effectifs et des valeurs de Amin, ainsi que des principales dimensions des carcasses pour les noyaux EC90 et EC120.

Feritna jedra - Mere - 11. del: EC-jedra za uporabo v napajalnikih

Ta del standarda IEC 62317 določa mere, ki so pomembne za mehansko medsebojno zamenljivost prednostnega razpona EC-jeder, bistvene mere tuljave, ki se uporablja s temi jedri, in vrednosti efektivnih parametrov, ki se uporabljajo pri izračunih, povezanih z jedri. Izbira velikosti jeder za ta standard temelji na načelu vključevanja tistih velikosti, ki se na podlagi vključenosti v nacionalni standard ali vsesplošne uporabe v industriji smatrajo za industrijske velikosti. Za podrobnosti glede načela izbiranja velikosti jeder, ki bodo vključena v standard, glej standard 62317-1.

General Information

Status
Withdrawn
Publication Date
25-Feb-2016
Withdrawal Date
22-Dec-2018
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
30-Aug-2021
Completion Date
30-Aug-2021

Relations

Buy Standard

Standard
EN 62317-11:2016
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62317-11:2016
01-april-2016
Feritna jedra - Mere - 11. del: EC-jedra za uporabo v napajalnikih
Ferrite cores - Dimensions - Part 11: EC-cores for use in power supply applications
Noyaux ferrites - Dimensions - Partie 11: Noyaux EC utilisés dans des applications
d’alimentation électrique
Ta slovenski standard je istoveten z: EN 62317-11:2016
ICS:
29.100.10 Magnetne komponente Magnetic components
SIST EN 62317-11:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62317-11:2016

---------------------- Page: 2 ----------------------

SIST EN 62317-11:2016


EUROPEAN STANDARD EN 62317-11

NORME EUROPÉENNE

EUROPÄISCHE NORM February 2016
ICS 29.100.10
English Version
Ferrite cores - Dimensions - Part 11: EC-cores for use in power
supply applications
(IEC 62317-11:2015)
Noyaux ferrites - Dimensions - Partie 11: Noyaux EC Ferritkerne - Maße - Teil 11: EC-Kerne für den Einsatz in
utilisés dans des applications d'alimentation électrique Netzteilen
(IEC 62317-11:2015) (IEC 62317-11:2015)
This European Standard was approved by CENELEC on 2015-12-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62317-11:2016 E

---------------------- Page: 3 ----------------------

SIST EN 62317-11:2016
EN 62317-11:2016
European foreword
The text of document 51/1077/CDV, future edition 1 of IEC 62317-11, prepared by IEC/TC 51
"Magnetic components and ferrite materials" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 62317-11:2016.
The following dates are fixed:
(dop) 2016-09-23
 latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2018-12-23
 latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62317-11:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60205:2006 NOTE Harmonized as EN 60205:2006.

2

---------------------- Page: 4 ----------------------

SIST EN 62317-11:2016



IEC 62317-11

®


Edition 1.0 2015-11




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Ferrite cores – Dimensions –

Part 11: EC-cores for use in power supply applications




Noyaux ferrites – Dimensions –

Partie 11: Noyaux EC utilisés dans des applications d’alimentation électrique
















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 29.100.10 ISBN 978-2-8322-2961-3



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 5 ----------------------

SIST EN 62317-11:2016
– 2 – IEC 62317-11:2015 © I
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.