prEN IEC 63316:2023
(Main)Audio/video, information and communication technology equipment - Safety - Power transfer between communications equipment ports using communications cabling at ≥ 60 vd.c. and AC
Audio/video, information and communication technology equipment - Safety - Power transfer between communications equipment ports using communications cabling at ≥ 60 vd.c. and AC
Equipements des technologies de l'audio/vidéo, de l'information et de la communication - Sécurité - Transfert de puissance entre les accès d'équipements de communication au moyen de câblages de communication ≥ 60 v en courant continu et en courant alternatif
Oprema za avdio/video, informacijsko in komunikacijsko tehnologijo - Varnost - Prenos moči med vrati komunikacijske opreme z uporabo komunikacijskih kablov pri ≥ 60 Vd.c. in AC
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2023
Oprema za avdio/video, informacijsko in komunikacijsko tehnologijo - Varnost -
Prenos moči med vrati komunikacijske opreme z uporabo komunikacijskih kablov
pri ≥ 60 Vd.c. in AC
Audio/Video, Information and Communication Technology Equipment - Safety - Power
transfer between Communications equipment ports using Communications cabling at ≥
60 Vd.c. and AC
Equipements des technologies de l'audio/vidéo, de l'information et de la communication -
Sécurité - Transfert de puissance entre les accès d'équipements de communication au
moyen de câblages de communication ≥ 60 V en courant continu et en courant alternatif
Ta slovenski standard je istoveten z: prEN IEC 63316:2023
ICS:
31.020 Elektronske komponente na Electronic components in
splošno general
33.160.01 Avdio, video in avdiovizualni Audio, video and audiovisual
sistemi na splošno systems in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
108/799/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 63316 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-01-27 2023-04-21
SUPERSEDES DOCUMENTS:
108/773/CD, 108/792/CC
IEC TC 108 : SAFETY OF ELECTRONIC EQUIPMENT WITHIN THE FIELD OF AUDIO/VIDEO, INFORMATION TECHNOLOGY AND
COMMUNICATION TECHNOLOGY
SECRETARIAT: SECRETARY:
United States of America Ms Valara Davis
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of
• any relevant patent rights of which they are aware and to provide supporting documentation,
• any relevant “in some countries” clauses to be included should this proposal proceed. Recipients are
reminded that the enquiry stage is the final stage for submitting "in some countries" clauses. See
AC/22/2007.
TITLE:
Audio/Video, Information and Communication Technology Equipment – Safety – Power transfer
between Communications equipment ports using Communications cabling at ≥ 60 Vd.c. and AC
PROPOSED STABILITY DATE: 2027
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
IEC CDV 63316 ED1 © IEC 2022 – 2 – 108/799/CDV
NOTE FROM TC/SC OFFICERS:
IEC CDV 63316 ED1 © IEC 2022 – 3 – 108/799/CDV
1 CONTENTS
3 FOREWORD . 5
4 INTRODUCTION . 7
5 1 Scope . 8
6 2 Normative references . 9
7 3 Terms and definitions . 10
8 3.1 Terms and definitions . 10
9 3.2 Abbreviated terms . 13
10 4 General requirements . 13
11 5 Communications power transfer using ≥ 60 V DC but ≤ 120 V DC, classified as
12 external ES2 circuit . 13
13 5.1 General Requirements . 13
14 5.2 Electrical-caused injury, electrical sources and safeguards . 14
15 5.3 Electrical-caused fire, power sources and safeguards . 14
16 5.3.1 DC power transfer interconnection to building wiring (3.1.1) . 14
17 5.3.2 DC power transfer interconnection to other equipment . 15
18 6 RFT-V and -C Network Powering (ES2 or ES3) . 15
19 6.1 General requirements . 15
20 6.2 General . 15
21 6.3 Connection to ICT networks operating at RFT . 16
22 6.4 Electrically caused injury . 17
23 6.4.1 Classification and limits of electrical energy sources . 17
24 6.4.2 Accessibility to electrical energy sources and safeguards . 24
25 6.5 Electrically caused fire . 26
26 6.5.1 Fire Protection requirements for RFT power sources . 26
27 7 AC/DC Power transfer of Hazardous Voltage Coax power circuits used by Cable TV
28 utility service providers . 26
29 7.1 General requirements . 26
30 7.2 Electrically caused injury . 27
31 7.2.1 Classification and limits of electrical energy sources . 27
32 7.2.2 Accessibility. 27
33 7.2.3 Safeguards . 27
34 Annex A (informative) Remote power feeding . 28
35 A.1 Overview . 28
36 A.2 Operational considerations . 29
37 A.3 Safety considerations . 29
38 A.3.1 Work practices . 30
39 A.4 Principle of remote power feeding . 30
40 A.4.1 RFT-C circuits . 30
41 A.4.2 RFT-V circuits (3.1.7) . 31
42 A.5 Safety aspects . 32
43 A.5.1 Steady-state body current . 32
44 A.5.2 Body resistance . 33
45 A.5.3 Charged capacitance . 33
46 Annex B (normative) Flammability test for fire enclosure materials of equipment . 35
47 Bibliography . 36
IEC CDV 63316 ED1 © IEC 2022 – 4 – 108/799/CDV
49 Figure 1 –Field of application. 15
50 Figure 2 – Maximum current after a single fault. 18
51 Figure 3 – RFT-C circuit capacitance limits . 19
52 Figure 4 – Charge and body resistance versus touch voltage . 20
53 Figure 5 – Basic charge measuring circuit . 20
54 Figure 6 – Characterization circuit . 22
55 Figure 7 – Maximum voltages permitted after a single fault . 24
56 Figure 8 – ES3 CATV Network Example . 26
57 Figure A.1 – Field of application of this recommendation . 28
58 Figure A.2 – Example of a remote power feeding RFT-C system . 31
59 Figure A.3 – Example of a remote power feeding RFT-V system with a repeater . 31
60 Figure A.4 – Example of a remote power feeding system . 31
62 Table 1 . 13
63 Table A.1 . 33
IEC CDV 63316 ED1 © IEC 2022 – 5 – 108/799/CDV
66 INTERNATIONAL ELECTROTECHNICAL COMMISSION
67 ____________
69 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY
70 EQUIPMENT – SAFETY – POWER TRANSFER BETWEEN
71 COMMUNICATIONS EQUIPMENT PORTS USING COMMUNICATIONS
72 CABLING AT ≥ 60 V D.C. AND AC –
74 FOREWORD
75 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
76 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
77 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
78 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
79 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
80 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
81 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
82 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
83 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
84 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
85 consensus of opinion on the relevant subjects since each technical committee has representation from all
86 interested IEC National Committees.
87 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
88 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
89 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
90 misinterpretation by any end user.
91 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
92 transparently to the maximum extent possible in their national and regional publications. Any divergence between
93 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
94 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
95 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
96 services carried out by independent certification bodies.
97 6) All users should ensure that they have the latest edition of this publication.
98 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
99 members of its technical committees and IEC National Committees for any personal injury, property damage or
100 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
101 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
102 Publications.
103 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
104 indispensable for the correct application of this publication.
105 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
106 rights. IEC shall not be held responsible for identifying any or all such patent rights.
107 IEC 63316 was prepared by IEC Technical Committee 108, Safety of electronic equipment within
108 the field of audio/video, information technology and communication technology. This standard
109 is
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.