CLC/TR 50404:2003
(Main)Electrostatics - Code of practice for the avoidance of hazards due to static electricity
Electrostatics - Code of practice for the avoidance of hazards due to static electricity
This document is a code of practice for avoiding ignition and electric shock hazards arising from static electricity. The processes that most commonly give rise to problems of static electricity are described in detail. They include the handling of solids, liquids, powders, gases, sprays and explosives. In each case, the source and nature of the electrostatic hazard is identified and specific recommendations are given for dealing with them. Basic information about the generation of undesirable static electricity in solids, liquids, gases, explosives, and also on persons, together with descriptions of how the charges generated cause ignitions or electric shocks, is given in the annexes. This document is not applicable to the hazards of static electricity relating to lightning, to damage to electronic components, nor to medical hazards.
Elektrostatika - Pravila ravnanja za izogibanje nevarnostim zaradi statične elektrike
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CLC/TR 50404:2003
01-november-2003
1DGRPHãþD
SIST R044-001:2002
(OHNWURVWDWLND3UDYLODUDYQDQMD]DL]RJLEDQMHQHYDUQRVWLP]DUDGLVWDWLþQHHOHNWULNH
Electrostatics - Code of practice for the avoidance of hazards due to static electricity
Ta slovenski standard je istoveten z: CLC/TR 50404:2003
ICS:
13.230 Varstvo pred eksplozijo Explosion protection
13.260 9DUVWYRSUHGHOHNWULþQLP Protection against electric
XGDURP'HORSRGQDSHWRVWMR shock. Live working
SIST-TP CLC/TR 50404:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CLC/TR 50404:2003
---------------------- Page: 2 ----------------------
SIST-TP CLC/TR 50404:2003
TECHNICAL REPORT CLC/TR 50404
RAPPORT TECHNIQUE
TECHNISCHER BERICHT June 2003
English version
Electrostatics -
Code of practice for the avoidance of hazards
due to static electricity
This Technical Report was approved by CENELEC on 2003-04-19.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. CLC/TR 50404:2003 E
---------------------- Page: 3 ----------------------
SIST-TP CLC/TR 50404:2003
CLC/TR 50404:2003 - 2 -
Foreword
This CENELEC code of practice gives information about the product and process properties necessary
to avoid electrostatic hazards as well as operational requirements to be written in the users manual to
ensure safe use of the product or process. It can be used in a risk assessment of electrostatic hazards
or for the preparation of product family or dedicated product standards for machines (i.e. type C
standards in CEN, as defined in EN 414:1992, 3.1).
This CENELEC document is based on a number of documents including two national Codes of
Practice: from the UK, BS 5958: Parts 1 & 2:1991, Control of undesirable static electricity; and from
Germany, ZH 1/200: October 1989, Code of Practice for preventing risks of ignition due to electrostatic
charges: Guidelines in static electricity, and a document published by Shell International Petroleum:
Static electricity - Technical and safety aspects. It gives the best available accepted state of the art
guidance for the avoidance of hazards due to static electricity.
This document is mainly written for designers of processes, manufacturers and test houses.
Appropriate information about the procedures necessary to avoid electrostatic hazards shall be written
in the users manual or on the product to ensure safety. This document can also be used by suppliers
of equipment (e.g. machines) when no product family or dedicated product standard exists or where
the existing standard does not deal with electrostatic hazards.
This CENELEC document was originally prepared by the Technical Committee CENELEC TC 44X,
Safety of machinery: electrotechnical aspects. The text of the first edition approved by CLC/TC 44X on
1997-11-07 and its publication was authorised by the CENELEC Technical Board on 1999-01-01.
Following a decision by CENELEC BT, the maintenance of the document was undertaken by the
Technical Committee CENELEC TC 31, Electrical apparatus for explosive atmospheres - General
requirements, which has delegated the revision to its Working Group 20 dealing with electrostatic
hazards.
The text of the draft was submittted to the National Committees for approval by correspondence and was
approved by CENELEC as CLC/TR 50404 on 2003-04-19.
This Technical Report supersedes R044-001:1999.
____________
---------------------- Page: 4 ----------------------
SIST-TP CLC/TR 50404:2003
- 3 - CLC/TR 50404:2003
Contents
Clause Page
1 Scope. 5
2 Definitions. 5
3 General. 7
3.1 Standard approaches. 7
3.2 Alternative approaches .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.