Metal halide lamps - Performance specification

IEC 61167:2011 specifies the performance requirements for metal halide lamps for general lighting purposes. This second edition replaces the first edition published in 1992 and its Amendments 1 (1995), 2 (1997) and 3 (1998). This second edition constitutes a technical revision. Compared to the 1st edition, measurement methods for electrical and photometric parameters are included and safety related requirements are deleted as far as they are now covered by IEC 62035. Modern kind of ignition (e.g. aggregated pulse widths) and operation (low frequency square wave) is added with extensive description of methods of calculation for peak current ratio. At the same time, a review was made on lamps in the market which are fit for standardising, leading to a big number of new lamp data sheets in the range of 20 W up to 250 W lamp power.

Halogen-Metalldampflampen - Anforderungen an die Arbeitsweise

Lampes aux halogénures métalliques - Spécifications de performance

La CEI 61167:2011 spécifie les exigences de performance relatives aux lampes aux halogénures métalliques pour l'éclairage à usage général. La seconde édition remplace la première édition publiée en 1992 ainsi que ses premier (1995), deuxième (1997) et troisième (1998) amendements. Cette seconde édition constitue une révision technique. Comparé à la 1e édition, des méthodes de mesure pour les paramètres électriques et photométriques ont été incluses et des exigences relatives à la sécurité ont été supprimées dans la mesure où elles sont désormais couvertes par la CEI 62035. Le type moderne d'allumage (par exemple les durées d'impulsion agrégées) et de fonctionnement (onde carrée de basse fréquence) est ajouté avec une description étendue de méthodes de calcul du rapport de courants de crête. Dans le même temps, les lampes du marché qui sont adaptées à la normalisation ont été passées en revue, ce qui a conduit à un grand nombre de nouvelles feuilles de caractéristiques de lampes dont la plage de puissance se situe entre 20 W et 250 W.

Sijalke s kovinskim halidom - Tehnične specifikacije

Ta mednarodni standard določa zahteve za delovanje za sijalke s kovinskim halidom za splošno razsvetljavo. Za nekatere zahteve, podane v tem standardu, je podana referenca do »ustreznih tehničnih podatkov za sijalko«. Za nekatere sijalke so ti tehnični podatki navedeni v tem standardu. Za druge sijalke v okviru uporabe tega standarda je ustrezne podatke podal proizvajalec sijalk ali odgovorni prodajalec. Zahteve tega standarda se nanašajo samo na tipsko preskušanje.

General Information

Status
Withdrawn
Publication Date
12-May-2011
Withdrawal Date
03-May-2014
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
10-Jun-2019
Completion Date
10-Jun-2019

Relations

Effective Date
29-Jan-2023
Effective Date
29-Jan-2023
Effective Date
29-Jan-2023
Effective Date
29-Jan-2023

Buy Standard

Standard
EN 61167:2011
English language
161 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61167:2011
01-september-2011
6LMDONHVNRYLQVNLPKDOLGRP7HKQLþQHVSHFLILNDFLMH
Metal halide lamps - Performance specifications
Lampes aux halogénures métalliques - Spécifications de performance
Ta slovenski standard je istoveten z: EN 61167:2011
ICS:
29.140.30 )OXRUHVFHQþQHVLMDONH6LMDONH Fluorescent lamps.
Discharge lamps
SIST EN 61167:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61167:2011

---------------------- Page: 2 ----------------------

SIST EN 61167:2011

EUROPEAN STANDARD
EN 61167

NORME EUROPÉENNE
May 2011
EUROPÄISCHE NORM

ICS 29.140.30 Supersedes EN 61167:1994 + A1:1995 + A2:1997 + A3:1998


English version


Metal halide lamps -
Performance specification
(IEC 61167:2011)


Lampes aux halogénures métalliques -  Halogen-Metalldampflampen -
Spécifications de performance Anforderungen an die Arbeitsweise
(CEI 61167:2011) (IEC 61167:2011)




This European Standard was approved by CENELEC on 2011-05-04. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61167:2011 E

---------------------- Page: 3 ----------------------

SIST EN 61167:2011
EN 61167:2011 - 2 -
Foreword
The text of document 34A/1442/FDIS, future edition 2 of IEC 61167, prepared by SC 34A, Lamps, of
IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 61167 on 2011-05-04.
This European Standard supersedes EN 61167:1994 + A1:1995 + A2:1997 + A3:1998.
Compared to EN 61167:1994, measurement methods for electrical and photometric parameters are
included and safety related requirements are deleted as far as they are now covered by EN 62035.
Modern kind of ignition (e.g. aggregated pulse widths) and operation (low frequency square wave) is
added with extensive description of methods of calculation for peak current ratio. At the same time, a
review was made on lamps in the market which are fit for standardising, leading to a big number of new
lamp data sheets in the range of 20 W up to 250 W lamp power.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2012-02-04
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-05-04
NOTE In this standard, the following print types are used:
– Requirements proper: in roman type.
– Test specifications: in italic type.
– Explanatory matter: in smaller roman type.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61167:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60081:1997 NOTE  Harmonized as EN 60081:1998 (not modified).
A1:2000 A1:2002 (modified)
A2:2003 A2:2003 (not modified)
IEC 60188 NOTE  Harmonized as EN 60188.
IEC 60357:2002 NOTE  Harmonized as EN 60357:2003 (modified).
IEC 60682 NOTE  Harmonized as EN 60682.
IEC 61231 NOTE  Harmonized as EN 61231.
__________

---------------------- Page: 4 ----------------------

SIST EN 61167:2011
- 3 - EN 61167:2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.