Passive filter units for electromagnetic interference suppression - Part 1: Generic specification

IEC 60939-1:2010 relates to passive filter units for electromagnetic interference suppression for use within, or associated with, electronic or electrical equipment and machines. Both single and multi-channel filters within one enclosure are included within the scope of this generic specification. This generic specification establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications within the IECQ-CECC system for electronic components. This edition includes the following significant technical changes with respect to the previous edition: a) table 3 has been updated, specifying how to handle the Neutral by 3-phase filter with Neutral; b) all details about 'Quality assessment' have been deleted in this edition, because this standard is a safety standard; c) filters shall be subjected to Test Aa of IEC 60068-2-1 for 16 h, using the degree of severity of the lower category temperature as prescribed in the relevant specification; d) since IEC 60068-2-20 does no longer make a difference between Method 1A and 1B, but only describes Method 1, references to the method to be used are updated.

Passive Filter für die Unterdrückung von elektromagnetischen Störungen - Teil 1: Fachgrundspezifikation

Filtres passifs d'antiparasitage - Partie 1: Spécification générique

La CEI 60939-1:2010 a trait aux filtres passifs d'antiparasitage utilisés dans les équipements et machines électroniques ou électriques, ou en association avec ceux-ci. Les filtres à voie unique et à voies multiples à l'intérieur d'une enveloppe font partie du domaine d'application de la présente spécification générique. La présente spécification générique établit les termes normalisés, les procédures de contrôle et les méthodes d'essai utilisés dans les spécifications intermédiaires et particulières dans le cadre du système IECQ-CECC pour les composants électroniques. La présente édition inclut les modifications techniques significatives suivantes par rapport à l'édition antérieure: a) Le Tableau 3 a été mis à jour: il spécifie la façon de traiter le Neutre par un filtre triphasé avec Neutre; b) Tous les détails se rapportant à l'Assurance de la Qualité' ont été supprimés dans la présente édition, car la présente norme est une norme de sécurité; c) Les filtres doivent être soumis à l'essai Aa de la CEI 60068-2-1 pendant 16 h en utilisant le degré de sévérité de la température de catégorie inférieure prescrite dans la spécification appropriée; d) Étant donné que la CEI 60068-2-20 n'établit plus de différence entre la Méthode 1A et la Méthode 1B, mais décrit uniquement la Méthode 1, les références à la méthode à utiliser sont mises à jour.

Pasivni filtri za dušenje elektromagnetnega motenja - 1. del: Generična specifikacija (IEC 60939-1:2010)

Ta generična specifikacija se nanaša na pasivne filtre za dušenje elektromagnetnega motenja za uporabo pri elektronski ali električni opremi ali napravah ali v povezavi z njimi. V okvir te generične specifikacije sodijo eno- in večkanalni filtri v enem zaprtem prostoru. Predmet te specifikacije so tudi filtri, narejeni iz kapacitivnih elementov, pri katerih je induktivnost del konstrukcije filtra. Podobno so tudi filtri, narejeni iz induktivnih elementov, pri katerih je kapacitivnost del konstrukcije filtra, predmet te specifikacije. Proizvajalec mora navesti, ali je določen sestavni del narejen kot kondenzator, induktor ali filter. Filtri, ki so predmet te generične specifikacije, se nadalje delijo na tiste, za katere so varnostni preskusi primerni (npr. tisti, ki so povezani z omrežnim napajanjem), in tiste, za katere ti preskusi niso primerni. Ločena presečna specifikacija zajema pasivne filtre, za katere so varnostni preskusi primerni. Ta generična specifikacija vzpostavlja standardne izraze, nadzorne postopke in metode preskušanja, ki se uporabljajo za presečno in podrobno specifikacijo v okviru sistema IECQ-CECC za elektronske komponente.

General Information

Status
Published
Publication Date
14-Oct-2010
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
08-Apr-2020

Relations

Buy Standard

Standard
EN 60939-1:2010
English language
38 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2010
1DGRPHãþD
SIST EN 60939-1:2005
3DVLYQLILOWUL]DGXãHQMHHOHNWURPDJQHWQHJDPRWHQMDGHO*HQHULþQD
VSHFLILNDFLMD ,(&
Passive filter units for electromagnetic interference suppression - Part 1: Generic
specification (IEC 60939-1:2010)
Passive Filter für die Unterdrückung von elektromagnetischen Störungen - Teil 1:
Fachgrundspezifikation (IEC 60939-1:2010)
Filtres passifs d'antiparasitage - Partie 1: Spécification générique (CEI 60939-1:2010)
Ta slovenski standard je istoveten z: EN 60939-1:2010
ICS:
31.160 (OHNWULþQLILOWUL Electric filters
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60939-1
NORME EUROPÉENNE
October 2010
EUROPÄISCHE NORM
ICS 31.160 Supersedes EN 60939-1:2005 + corr. Apr.2009

English version
Passive filter units for electromagnetic interference suppression -
Part 1: Generic specification
(IEC 60939-1:2010)
Filtres passifs d'antiparasitage -  Passive Filter für die Unterdrückung von
Partie 1: Spécification générique elektromagnetischen Störungen -
(CEI 60939-1:2010) Teil 1: Fachgrundspezifikation
(IEC 60939-1:2010)
This European Standard was approved by CENELEC on 2010-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60939-1:2010 E
Foreword
The text of document 40/2046/FDIS, future edition 3 of IEC 60939-1, prepared by IEC TC 40, Capacitors
and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 60939-1 on 2010-10-01.
This European Standard supersedes EN 60939-1:2005 + corr. Apr.2009.
This EN 60939-1:2010 includes the following significant technical changes with respect to
EN 60939-1:2005 + corr. Apr.2009:
a) Table 3 has been updated, specifying how to handle the Neutral by 3-phase filter with Neutral;
b) all details about “Quality assessment” have been deleted in this edition, because this standard is a
safety standard;
c) filters shall be subjected to Test Aa of EN 60068-2-1 for 16 h, using the degree of severity of the lower
category temperature as prescribed in the relevant specification;
d) since EN 60068-2-20 does no longer make a difference between Method 1A and 1B, but only
describes Method 1, references to the method to be used are updated.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-07-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-10-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60939-1:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60990 NOTE  Harmonized as EN 60990.
__________
- 3 - EN 60939-1:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60027 Series Letter symbols to be used in electrical - -
technology
IEC 60050 Series International Electrotechnical Vocabulary - -

IEC 60062 - Marking codes for resistors and capacitors EN 60062 -

1)
IEC 60068-1 1988 Environmental testing - EN 60068-1 1994
Part 1: General and guidance
IEC 60068-2-1 - Environmental testing - EN 60068-2-1 -
Part 2-1: Tests - Test A: Cold

IEC 60068-2-2 - Environmental testing - EN 60068-2-2 -
Part 2-2: Tests - Test B: Dry heat

IEC 60068-2-6 - Environmental testing - EN 60068-2-6 -
Part 2-6: Tests - Test Fc: Vibration
(sinusoidal)
IEC 60068-2-13 - Environmental testing - EN 60068-2-13 -
Part 2-13: Tests - Test M: Low air pressure

IEC 60068-2-14 - Environmental testing - EN 60068-2-14 -
Part 2-14: Tests - Test N: Change of
temperature
IEC 60068-2-17 - Environmental testing - EN 60068-2-17 -
Part 2-17: Tests - Test Q: Sealing

IEC 60068-2-20 - Environmental testing - EN 60068-2-20 -
Part 2-20: Tests - Test T: Test methods for
solderability and resistance to soldering heat
of devices with leads
IEC 60068-2-21 - Environmental testing - EN 60068-2-21 -
Part 2-21: Tests - Test U: Robustness of
terminations and integral mounting devices

IEC 60068-2-27 - Environmental testing - EN 60068-2-27 -
Part 2-27: Tests - Test Ea and guidance:
Shock
2)
IEC 60068-2-29 - Environmental testing - EN 60068-2-29 -
Part 2: Tests - Test Eb and guidance: Bump

1)
EN 60068-1 includes A1 to IEC 60068-1 + corr. October .
2)
EN 60068-2-29 is superseded by EN 60068-2-27:2009, which is based on IEC 60068-2-27:2008.

Publication Year Title EN/HD Year

IEC 60068-2-30 2005 Environmental testing - EN 60068-2-30 2005
Part 2-30: Tests - Test Db: Damp heat, cyclic
(12 h + 12 h cycle)
IEC 60068-2-45 1980 Environmental testing - EN 60068-2-45 1992
Part 2: Tests - Test Xa and guidance:
Immersion in cleaning solvents

IEC 60068-2-78 - Environmental testing - EN 60068-2-78 -
Part 2-78: Tests - Test Cab: Damp heat,
steady state
IEC 60085 - Electrical insulation - Thermal evaluation and EN 60085 -
designation
IEC 60294 - Measurement of the dimensions of a - -
cylindrical component having two axial
terminations
IEC 60384-14 2005 Fixed capacitors for use in electronic EN 60384-14 2005
equipment -
Part 14: Sectional specification - Fixed
capacitors for electromagnetic interference
suppression and connection to the supply
mains
IEC 60410 - Sampling plans and procedures for inspection - -
by attributes
IEC 60695-11-5 - Fire hazard testing - EN 60695-11-5 -
Part 11-5: Test flames - Needle-flame test
method - Apparatus, confirmatory test
arrangement and guidance
CISPR 17 - Methods of measurement of the suppression EN 55017 -
characteristics of passive radio interference
filters and suppression components

ISO 1000 - SI units and recommendations for the use of - -
their multiples and of certain other units

IEC 60939-1 ®
Edition 3.0 2010-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Passive filter units for electromagnetic interference suppression –
Part 1: Generic specification
Filtres passifs d’antiparasitage –
Partie 1: Spécification générique

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
V
CODE PRIX
ICS 31.160 ISBN 978-2-88912-102-1
– 2 – 60939-1 © IEC:2010
CONTENTS
FOREWORD.5
1 General .7
1.1 Scope.7
1.2 Normative references .7
2 Terms, definitions and technical data .8
2.1 Units, symbols and terminology .8
2.2 Terms and definitions .9
2.3 Preferred values.11
2.4 Marking .11
2.4.1 General .11
2.4.2 Coding.11
2.5 Components .11
3 Test and measurement procedures.11
3.1 General .11
3.2 Standard atmospheric conditions.12
3.2.1 Standard atmospheric conditions for testing .12
3.2.2 Recovery conditions .12
3.2.3 Referee conditions .12
3.2.4 Reference conditions.13
3.3 Drying .13
3.4 Visual examination and check of dimensions.13
3.4.1 Visual examination .13
3.4.2 Dimensions (gauging).13
3.4.3 Dimensions (detail).13
3.4.4 Creepage distances and clearances .13
3.5 Insulation resistance .13
3.5.1 Measuring voltage .14
3.5.2 Application of measuring voltage .14
3.5.3 Mean time to measuring .15
3.5.4 Temperature correction factor.15
3.5.5 Information to be given in a detail specification.15
3.6 Voltage proof.16
3.6.1 Test circuit and procedure for a d.c. test.17
3.6.2 Test circuit and procedure for an a.c. test.17
3.6.3 Tests .18
3.6.4 Requirements .18
3.6.5 Repetition of the voltage proof test .19
3.6.6 Information to be given in a detail specification.19
3.7 Insertion loss.19
3.8 Discharge resistance.19
3.9 Robustness of terminations .19
3.9.1 General .19
3.9.2 Test Ua1 – Tensile .19
3.9.3 Test Ub – Bending.20
3.9.4 Test Uc – Torsion .20
3.9.5 Test Ud – Torque.20

60939-1 © IEC:2010 –
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.