General Information

Abstract

Deals with the safety of electrically heated gullies for de-icing the inlet of the drainage system of flat roofs, balconies, and similar structures. The rated voltage is not more than 250 V.

Status
Published
Publication Date
29-Oct-2002
Withdrawal Date
31-Jan-2005
Drafting Committee
IEC/TC 61 - IEC_TC_61
Parallel Committee
IEC/TC 61 - IEC_TC_61
Current Stage
6060 - Document made available - Publishing
Start Date
30-Oct-2002
Completion Date
30-Oct-2002

Buy Documents

Standard

EN 60335-2-83:2003

English language (14 pages)
Preview
Preview
e-Library read for
×1 day

Overview

EN 60335-2-83:2002 (based on IEC 60335-2-83:2001) is the European safety standard for electrically heated gullies for roof drainage. It covers appliances designed to de-ice and maintain the inlet of drainage systems on flat roofs, balconies and similar structures. The standard applies to devices with a rated voltage not exceeding 250 V and is intended to be used together with EN/IEC 60335‑1 (Safety of household and similar electrical appliances - Part 1: General requirements).

Approved by CENELEC (2002-02-01) and adopted nationally (e.g., SIST EN 60335-2-83:2003), this part‑2 standard supplements and modifies the general requirements in Part 1 to address the specific hazards and testing needs of heated gullies.

Key topics and requirements

EN 60335-2-83 focuses on safety aspects tailored to roof-drainage heating devices. Key technical topics and requirements include:

  • Scope and definitions specific to heated gullies and roof drainage components.
  • Mandatory use with EN/IEC 60335‑1: Part 2‑83 supplements or modifies general clauses from Part 1.
  • Electrical safety: protection against access to live parts, leakage current, insulation and electric strength at operating temperature.
  • Thermal and fire safety: heating performance, resistance to heat, fire behavior and thermal protection.
  • Mechanical safety: stability, mechanical strength and hazards relevant to rooftop installation and environmental exposure.
  • Environmental and durability tests: moisture resistance, salt‑mist and cyclic environment testing (reference to IEC 60068‑2‑52), endurance and abnormal-operation tests.
  • Construction and components: internal wiring, terminals, earthing, screws/connections and components selection.
  • Marking and instructions: required labelling, installation and maintenance instructions for safe use and compliance.
  • Test specifications and numbering: additional subclauses, annexes and testing conventions that extend Part 1 for this product family.

(EN 60335‑2‑83 addresses electrical, mechanical, thermal, fire and radiation risks as they apply to heated gullies.)

Applications and who uses this standard

EN 60335-2-83 is used by:

  • Manufacturers and product designers of electrically heated gullies and roof-deicing systems to design safe, compliant products.
  • Test laboratories and certification bodies performing type testing and conformity assessment.
  • Compliance engineers and regulatory authorities verifying alignment with the Low Voltage Directive and relevant national standards.
  • Installers, specifiers and building engineers choosing suitable devices for flat roofs, balconies and similar drainage in cold climates.
  • Procurement and facility managers requiring certified equipment for building drainage reliability.

Related standards and directives

  • EN/IEC 60335‑1 - General requirements for household and similar electrical appliances (must be used in conjunction).
  • IEC 60335‑2‑83:2001 - International edition on which EN 60335‑2‑83 is based.
  • IEC 60068‑2‑52 - Environmental testing: salt mist, cyclic (referenced for corrosion testing).
  • EU Directives: Low Voltage Directive (73/23/EEC) (covered); Machinery Directive (98/37/EC) considered not applicable for primarily electrical risks.

Keywords: EN 60335-2-83, IEC 60335-2-83, heated gullies, roof drainage, de-icing, electrical safety standard, household appliance safety.

Relations

Effective Date
03-Feb-2026
Effective Date
09-Feb-2026
Effective Date
09-Feb-2026
Effective Date
28-Jan-2023

Buy Documents

Standard

EN 60335-2-83:2003

English language (14 pages)
Preview
Preview
e-Library read for
×1 day

Get Certified

Connect with accredited certification bodies for this standard

DIBt (Deutsches Institut für Bautechnik)

German Institute for Building Technology.

DAKKS Germany Verified

DIN CERTCO

DIN Group product certification.

DAKKS Germany Verified

Aboma Certification B.V.

Specialized in construction, metal, and transport sectors.

RVA Netherlands Verified

Sponsored listings

Frequently Asked Questions

EN 60335-2-83:2002 is a standard published by CLC. Its full title is "Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage". This standard covers: Deals with the safety of electrically heated gullies for de-icing the inlet of the drainage system of flat roofs, balconies, and similar structures. The rated voltage is not more than 250 V.

Deals with the safety of electrically heated gullies for de-icing the inlet of the drainage system of flat roofs, balconies, and similar structures. The rated voltage is not more than 250 V.

EN 60335-2-83:2002 is classified under the following ICS (International Classification for Standards) categories: 91.060.20 - Roofs. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 60335-2-83:2002 has the following relationships with other standards: It is inter standard links to EN 60068-2-52:1996, EN 12976-1:2017, EN 12976-1:2021, EN 60335-2-83:2002/A1:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 60335-2-83:2002 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 2014/35/EU, 2014/53/EU, 73/23/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 60335-2-83:2002 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI SIST EN 60335-2-83:2003

STANDARD
marec 2003
Gospodinjski in podobni električni aparati - Varnost - 2-83. del: Splošne
zahteve za ogrevanje strešnih žlebov (IEC 60335-2-83:2001)
Household and similar electrical appliances - Safety -- Part 2-83: Particular
requirements for heated gullies for roof drainage
ICS 91.060.20 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 60335-2-83
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2002

ICS 91.060.20
English version
Household and similar electrical appliances -
Safety
Part 2-83: Particular requirements for heated gullies
for roof drainage
(IEC 60335-2-83:2001)
Appareils électrodomestiques et Sicherheit elektrischer Geräte für den
analogues - Sécurité Hausgebrauch und ähnliche Zwecke
Partie 2-83: Règles particulières pour Teil 2-83: Besondere Anforderungen für
les dispositifs électriques de chauffage beheizbare Dachabläufe
des gouttières (IEC 60335-2-83:2001)
(CEI 60335-2-83:2001)
This European Standard was approved by CENELEC on 2002-02-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60335-2-83:2002 E
Foreword
The text of document 61/2056/FDIS, future first edition of IEC 60335-2-83, prepared by the IEC Technical
Committee 61, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60335-2-83 on 2002-02-01.
The following dates are applicable:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-07-01
- date on which national standards
conflicting with the EN have to be withdrawn (dow) 2005-02-01
This part 2 has to be used in conjunction with EN 60335-1, Safety of household and similar electrical
appliances, Part 1: General requirements. It was established on the basis of the 2002 edition of that
standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when
such changes become applicable will be stated in the relevant amendment or revision of Part 1.
This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the
European Standard: Safety requirements for electric heated gullies for roof drainage.
When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is
reasonable. When this standard states "addition", "modification" or "replacement", the relevant text of
Part 1 is to be adapted accordingly.
NOTE 1 The following numbering system is used:
- subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
- unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a
replaced clause or subclause;
- additional annexes are lettered AA, BB, etc.
Subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z.
NOTE 2 The following print types are used:
- requirements: in roman type;
- test specifications: in italic type;
- notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun
are also in bold.
There are no special national conditions causing a deviation from this European Standard, other than
those listed in annex ZA to EN 60335-1.
There are no national deviations from this European Standard, other than those listed in annex ZB to
EN 60335-1.
p NOTE  In this document, p is used in the margin to indicate instructions for preparing the printed version.
_____________
- 3 - EN 60335-2-83:2002
Introduction
p Add:
An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this
standard are fully covered by the Low Voltage Directive, 73/23/EEC. For products having mechanical
moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown that
the risks are mainly of electrical origin and consequently this directive is not applicable. However, the
relevant essential safety requirements of the Machinery Directive are covered by this standard together
with the principal objectives of the Low Voltage Directive.
____________
Endorsement notice
The text of the International Standard IEC 60335-2-83:2001 was approved by CENELEC as a European
Standard without any modification.
____________
Annex ZC
(normative)
Normative references to international publications
with their corresponding European publications
Addition:
Publication Year Title EN/HD Year
1) 2)
IEC 60068-2-52 - Environmental testing - EN 60068-2-52 1996
Part 2: Tests - Test Kb: Salt mist, cyclic
(sodium chloride solution)
__________
1)
undated reference
2)
valid edition at date of issue

NORME CEI
INTERNATIONALE IEC
60335-2-83
INTERNATIONAL
Première édition
STANDARD
First edition
2001-11
Appareils électrodomestiques et analogues –
Sécurité –
Partie 2-83:
Règles particulières pour les dispositifs
électriques pour le chauffage des gouttières
Household and similar electrical appliances –
Safety –
Part 2-83:
Particular requirements for heated gullies
for roof drainage
 IEC 2003 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch  Web: www.iec.ch
CODE PRIX
L
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60335-2-83  IEC:2003 – 3 –
CONTENTS
FOREWORD . 5
INTRODUCTION .9
1 Scope .11
2 Normative references.11
3 Definitions .11
4 General requirement .11
5 General conditions for the tests .13
6 Classification .13
7 Marking and instructions .13
8 Protection against access to live parts .13
9 Starting of motor-operated appliances .13
10 Power input and current.13
11 Heating.13
12 Void .15
13 Leakage current and electric strength at operating temperature .15
14 Transient overvoltages.15
15 Moisture resistance.15
16 Leakage current and electric strength .15
17 Overload protection of transformers and associated circuits.15
18 Endurance .15
19 Abnormal operation.15
20 Stability and mechanical hazards.15
21 Mechanical strength.17
22 Construction .17
23 Internal wiring.17
24 Components .17
25 Supply connection and external flexible cords.17
26 Terminals for external conductors .17
27 Provision for earthing.19
28 Screws and connections .19
29 Clearances, creepage distances and solid insulation .19
30 Resistance to heat and fire .19
31 Resistance to rusting .19
32 Radiation, toxicity and similar hazards .19
Annexes.20

60335-2-83  IEC:2003 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-83: Particular requirements for
heated gullies for roof drainage
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides
...