EN 55103-1:2009

Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emissions

This European Standard for EMC emission requirements applies to professional audio, video, audio-visual and entertainment lighting control apparatus as defined in 3.6 intended for use in the environments described in Clause 4. This includes the digital apparatus defined in 3.5 and sub-assemblies, see 6.3. Disturbances in the frequency range 0 Hz to 400 GHz are covered, but requirements are not set over the whole of that range. See Note 5. NOTE 1 In Annex D, information is included on infra-red radiation in the wavelength range 0,7 μm to 1,6 μm. Fault conditions of source or victim apparatus are not taken into account. Apparatus as defined in 3.4, 3.5 and 3.6 may be operated with any source of power. NOTE 2 Sources of power may include, for example: the public low-voltage supply; private supplies with similar characteristics; a d.c. source provided specifically for the apparatus; batteries internal to the apparatus; stand-by generators. Some standards may not apply to private low-voltage supplies. NOTE 3 In special cases, for instance when highly susceptible apparatus is being used in proximity, additional mitigation measures may have to be employed to reduce the electromagnetic emission further, below the specified levels. NOTE 4 Professional-user receiving apparatus may be very sensitive to disturbance; see Annex E. This European Standard does not apply to - consumer apparatus, - apparatus specifically designed for security systems, and - apparatus designed to radiate electromagnetic energy for radio communications purposes. NOTE 5 To ensure freedom from interference, manufacturers should consider the characteristics of other equipment likely to be in the same environment and thus determine whether limitation of emissions in additional frequency ranges is necessary. The objective of this standard is to define limits and methods of measurement for apparatus defined in the scope, in relation to continuous and transient, conducted and radiated disturbances. These requirements represent essential electromagnetic compatibility requirements.

Elektromagnetische Verträglichkeit - Produktfamiliennorm für Audio-, Video- und audiovisuelle Einrichtungen sowie für Studio-Lichtsteuereinrichtungen für professionellen Einsatz - Teil 1: Störaussendungen

Compatibilité électromagnétique - Norme de famille de produits pour les appareils à usage professionnel audio, vidéo, audiovisuels et de commande de lumière pour spectacles - Partie 1: Emissions

Elektromagnetna združljivost - Standard za družino izdelkov za regulacijo avdio, video, avdiovizualnih in osvetlitvenih zabaviščnih naprav za profesionalno uporabo - 1. del: Oddajanje

Ta evropski standard za zahteve glede oddajanja EMC velja za profesionalne avdio, video, avdiovizualne in osvetlitvene zabaviščne naprave, kot so opredeljene v točki 3.6, namenjene za uporabo v okoljih, opisanih v Klavzuli 4. Vključuje digitalne naprave, opredeljene v točki 3.5., in podsklope  (glej točko 6.3). Motnje v frekvenčnem razponu od 0 Hz do 400 GHz so zajete, vendar zahteve niso podane za ta celotni razpon (glej Opombo 5). OPOMBA 1: V Dodatku D so vključene informacije o infrardečem sevanju v razponu valovnih dolžin od 0,7 do 1,6 µm. Okvare vira ali prizadete naprave niso upoštevane. Naprave, opredeljene v točkah 3.4, 3.5 in 3.6, lahko napaja kakršen koli vir energije. OPOMBA 2: Viri energije lahko na primer vključujejo: javno nizkonapetostno oskrbo; zasebne oskrbe s podobnimi značilnostmi; enosmerni vir, namenjen posebej za napravo; notranje baterije naprave; generatorje v stanju pripravljenosti. Nekateri standardi morda ne veljajo za zasebne nizkonapetostne oskrbe. OPOMBA 3: V posebnih primerih, na primer kadar se v bližini uporabi zelo dovzetna naprava, se lahko uporabijo dodatni omilitveni ukrepi za dodatno zmanjševanje elektromagnetnih motenj pod določenimi ravnmi. OPOMBA 4: Naprava za sprejemanje za profesionalnega uporabnika je lahko zelo občutljiva na motnje (glej Dodatek E). Ta evropski standard ne velja za - potrošniške naprave; naprave, posebej zasnovane za varnostne sisteme in - naprave, zasnovane za oddajanje elektromagnetne energije za namene radijskih komunikacij.

General Information

• Status: Withdrawn
• Publication Date: 16-Jul-2009
• Withdrawal Date: 30-Jun-2012
• ICS: 33.100.10 - Emission
• Technical Committee: CLC/TC 210 - Electromagnetic Compatibility (EMC)
• Drafting Committee: CLC/TC 210 - Electromagnetic Compatibility (EMC)
• Parallel Committee: IEC/TC 100 - IEC_TC_100
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 05-Mar-2017
• Completion Date: 05-Mar-2017
• Directive: 2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Directive: 89/336/EEC - Electromagnetic compatibility (EMC)
• Ref Project: SIST EN 55103-1:2010 - Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emissions

Relations

• Replaces: EN 55103-1:1996 - Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission
• Effective Date: 28-Jan-2023
• Replaced By: EN 55032:2012 - Electromagnetic compatibility of multimedia equipment - Emission requirements
• Effective Date: 29-Jan-2023
• Amended By: EN 55103-1:2009/A1:2012 - Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emissions
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 55103-1:2010
01-december-2010
1DGRPHãþD
SIST EN 55103-1:1998
(OHNWURPDJQHWQD]GUXåOMLYRVW6WDQGDUG]DGUXåLQRL]GHONRY]DUHJXODFLMRDYGLR
YLGHRDYGLRYL]XDOQLKLQRVYHWOLWYHQLK]DEDYLãþQLKQDSUDY]DSURIHVLRQDOQR
XSRUDERGHO2GGDMDQMH
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and
entertainment lighting control apparatus for professional use - Part 1: Emissions
Elektromagnetische Verträglichkeit - Produktfamiliennorm für Audio-, Video- und
audiovisuelle Einrichtungen sowie für Studio-Lichtsteuereinrichtungen für professionellen
Einsatz - Teil 1: Störaussendungen
Compatibilité électromagnétique - Norme de famille de produits pour les appareils à
usage professionnel audio, vidéo, audiovisuels et de commande de lumière pour
spectacles - Partie 1: Emissions
Ta slovenski standard je istoveten z: EN 55103-1:2009
ICS:
33.100.10 Emisija Emission
33.160.01 Avdio, video in avdiovizualni Audio, video and audiovisual
sistemi na splošno systems in general
SIST EN 55103-1:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 55103-1:2010

---------------------- Page: 2 ----------------------

SIST EN 55103-1:2010


EUROPEAN STANDARD
EN 55103-1

NORME EUROPÉENNE
July 2009
EUROPÄISCHE NORM

ICS 33.100.10 Supersedes EN 55103-1:1996


English version


Electromagnetic compatibility -
Product family standard for audio, video, audio-visual
and entertainment lighting control apparatus for professional use -
Part 1: Emissions



Compatibilité électromagnétique - Elektromagnetische Verträglichkeit -

Norme de famille de produits Produktfamiliennorm für Audio-, Video-
pour les appareils à usage professionnel und audiovisuelle Einrichtungen sowie
audio, vidéo, audiovisuels et de für Studio-Lichtsteuereinrichtungen
commande de lumière pour spectacles - für professionellen Einsatz -
Partie 1: Emissions Teil 1: Störaussendungen




This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 55103-1:2009 E

---------------------- Page: 3 ----------------------

SIST EN 55103-1:2010
EN 55103-1:2009 - 2 -
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 210, Electromagnetic
compatibility (EMC).
The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 55103-1 on
2009-07-01.
This European Standard supersedes EN 55103-1:1996.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-07-01
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and covers protection requirements of EC Directive
2004/108/EC. See Annex ZZ.
___________

---------------------- Page: 4 ----------------------

SIST EN 55103-1:2010
- 3 - EN 55103-1:2009
Contents
e1 Sc o p e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 Normative references . 4
3 Definitions .
...