EN IEC 62044-3:2023
(Main)Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level
Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level
IEC 62044-3:2023 is available as IEC 62044-3:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62044-3:2023 specifies measuring methods for power loss and amplitude permeability of magnetic cores forming the closed magnetic circuits intended for use at high excitation levels in inductors, chokes, transformers and similar devices for power electronics applications. This second edition cancels and replaces the first edition published in 2000. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: addition of Annex F and Annex G.
Kerne aus weichmagnetischen Materialien - Messverfahren - Teil 3: Messungen der magnetischen Eigenschaften im Leistungsapplikationsbereich
Noyaux en matériaux magnétiques doux - Méthodes de mesure - Partie 3: Propriétés magnétiques à niveau élevé d'excitation
IEC 62044-3:2023 est disponible sous forme de IEC 62044-3:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 62044-3:2023 spécifie les méthodes de mesure de la perte de puissance et de la perméabilité d'amplitude des noyaux magnétiques qui forment les circuits magnétiques fermés destinés à être utilisés à des niveaux élevés d'excitation dans les bobines d'inductance, les bobines d'arrêt, les transformateurs et les dispositifs similaires pour les applications d'électronique de puissance. Cette deuxième édition annule et remplace la première édition parue en 2000. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: ajout de l'Annexe F et de l'Annexe G.
Jedra iz mehkomagnetnih materialov - Merilne metode - 3. del: Magnetne lastnosti pri močnem vzbujanju
V tem delu standarda IEC 62044 so določene merilne metode za izgubo moči in amplitudno prepustnost magnetnih jeder, ki tvorijo zaprta magnetna vezja, namenjena za uporabo pri močnem vzbujanju v induktorjih, dušilkah, transformatorjih in podobnih napravah z močnostno elektroniko.
Metode, podane v tem dokumentu, lahko zajemajo merjenje magnetnih lastnosti za frekvence v območju od enosmernega toka do 10 MHz in morda še celo več, za kalorimetrične in odbojne metode. Uporabnost posameznih metod za določena frekvenčna območja je odvisna od stopnje natančnosti, ki jo je treba doseči.
Metode v tem dokumentu so v osnovi najprimernejše za sinusno vzbujanje. Uporabiti je mogoče tudi druge periodične valovne oblike, vendar zadostno natančnost je mogoče doseči le, če so uporabljena merilna vezja in instrumenti zmožni obravnavati ter obdelati amplitude in faze signalov, vključene v frekvenčnem spektru, ki ustreza dani gostoti magnetnega pretoka in valovnim oblikam jakosti polja z le nekoliko manjšo natančnostjo.
OPOMBA: Za nekatere magnetno mehke kovinske materiale bo morda treba upoštevati posebna splošna načela v zvezi s pripravo primerkov in podanimi izračuni, ki so za takšne materiale običajna. Ta načela so navedena v standardu IEC 60404-8-6.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62044-3:2023
01-november-2023
Jedra iz mehkomagnetnih materialov - Merilne metode - 3. del: Magnetne lastnosti
pri močnem vzbujanju
Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic
properties at high excitation level
Kerne aus weichmagnetischen Materialien - Messverfahren - Teil 3: Messungen der
magnetischen Eigenschaften im Leistungsapplikationsbereich
Noyaux en matériaux magnétiques doux - Méthodes de mesure - Partie 3: Propriétés
magnétiques à niveau élevé d'excitation
Ta slovenski standard je istoveten z: EN IEC 62044-3:2023
ICS:
17.220.20 Merjenje električnih in Measurement of electrical
magnetnih veličin and magnetic quantities
29.100.10 Magnetne komponente Magnetic components
SIST EN IEC 62044-3:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62044-3:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 62044-3:2023
EUROPEAN STANDARD EN IEC 62044-3
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2023
ICS 29.030; 29.100.10 Supersedes EN 62044-3:2001;
EN 62044-3:2001/AC:2021-11
English Version
Cores made of soft magnetic materials - Measuring methods -
Part 3: Magnetic properties at high excitation level
(IEC 62044-3:2023)
Noyaux en matériaux magnétiques doux - Méthodes de Kerne aus weichmagnetischen Materialien - Messverfahren
mesure - Partie 3: Propriétés magnétiques à niveau élevé - Teil 3: Messungen der magnetischen Eigenschaften im
d'excitation Leistungsapplikationsbereich
(IEC 62044-3:2023) (IEC 62044-3:2023)
This European Standard was approved by CENELEC on 2023-08-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62044-3:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62044-3:2023
EN IEC 62044-3:2023 (E)
European foreword
The text of document 51/1426/CDV, future edition 2 of IEC 62044-3, prepared by IEC/TC 51
"Magnetic components, ferrite and magnetic powder materials" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62044-3:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-05-11
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-08-11
document have to be withdrawn
This document supersedes EN 62044-3:2001 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62044-3:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60051-1 NOTE Approved as EN 60051-1
IEC 60205 NOTE Approved as EN 60205
IEC 60401-3:2015 NOTE Approved as EN 60401-3:2016 (not modified)
IEC 60404-8-6 NOTE Approved as EN 60404-8-6
IEC 61332:2016 NOTE Approved as EN 61332:2017 (not modified)
2
---------------------- Page: 4 ----------------------
SIST EN IEC 62044-3:2023
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.