EN 60708:2005/AC:2016-08 - Low-frequency cables with polyolefin insulation and moisture barrier

Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath

IEC Corrigendum

Niederfrequenzkabel mit Isolierung aus Polyolefin und mit Polyolefin-Schichtenmantel

Câbles pour basses fréquences à isolation polyoléfine et gaine polyoléfine à barrière d'étanchéité

Nizkofrekvenčni kabli s poliolefinsko izolacijo in poliolefinskim plaščem za zaščito pred vlago (IEC 60708:2005/COR1:2016) - Popravek AC

General Information

Status

Published

Publication Date

18-Aug-2016

ICS

29.060.20 - Cables

Technical Committee

CLC/TC 46X - Communication cables

Drafting Committee

CLC/TC 46X - Communication cables

Current Stage

6060 - Document made available - Publishing

Start Date

19-Aug-2016

Completion Date

19-Aug-2016

Ref Project

SIST EN 60708:2008/AC:2016 - Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath (IEC 60708:2005/COR1:2016)

Relations

Corrects

EN 60708:2005 - Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath

Effective Date

23-Aug-2016

Buy Standard

Corrigendum

EN 60708:2008/AC:2016

English and French language

3 pages

sale 10% off

Preview

sale 10% off

Preview

e-Library read for

1 day

Create e-Library subscription and get permanent access to the document. Subscriptions are available for: 29 29.060 29.060.20

Standards Content (Sample)

EN 60708:2008/AC:2016

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Niederfrequenzkabel mit Isolierung aus Polyolefin und mit Polyolefin-Schichtenmantel (IEC 60708:2005/COR1:2016)Câbles pour basses fréquences à isolation polyoléfine et gaine polyoléfine à barrière d'étanchéité (IEC 60708:2005/COR1:2016)Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath (IEC 60708:2005/COR1:2016)29.060.20KabliCablesICS:Ta slovenski standard je istoveten z:EN 60708:2005/AC:2016-08SIST EN 60708:2008/AC:2016en,fr01-oktober-2016SIST EN 60708:2008/AC:2016SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 60708:2005/AC:2016-08
August 2016
ICS 29.060.20 English Version
Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath (IEC 60708:2005/COR1:2016)
Câbles pour basses fréquences à isolation polyoléfine et gaine polyoléfine à barrière d'étanchéité (IEC 60708:2005/COR1:2016)
Niederfrequenzkabel mit Isolierung aus Polyolefin und mit Polyolefin-Schichtenmantel (IEC 60708:2005/COR1:2016) This corrigendum becomes effective on 19 August 2016 for incorporation in the English language version of the EN. European Committee for Electrotechnical Standardization
Comité Européen d
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC

EN 60708:2005(Main)

Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath

SIST EN 60708:2008

Is intended to define polyolefin insulated cables for insertion into local outdoor networks.is applicable to polyolefin insulated and moisture barrier polyolefin sheathed telephone cables, filled or unfilled with copper conductors,includes general design details and requirements for dimensions and other constructional details as well as mechanical, electrical and environmental characteristics for all types of low-frequency cables with polyolefin insulation (solid or cellular), filled or unfilled, and moisture barrier polyolefin sheath (with integral suspension strand)

Standard
30 pages
English language
sale 10% off
e-Library read for
1 day

28-Nov-2005
30-Sep-2008
29.060.20
CLC/TC 46X

CLC

EN 50620:2017/A2:2024(Amendment)

Electric cables - Charging cables for electric vehicles

SIST EN 50620:2017/A2:2024

This standard specifies design, dimensions and test requirements for halogen-free cables with extruded insulation and sheath having a voltage rating of up to and including 450/750 V for flexible applications under severe condition for the power supply between the electricity supply point or the charging station and the electric vehicle (EV). The EV charging cable is intended to supply power and if needed communication (details see EN 61851 1 and the EN 62196 series) to an electric vehicle. The charging cables are applicable for charging modes 1-3 of EN 61851 1. The cables in this standard with rated voltage 300/500 V are only permitted for charging mode 1 of EN 61851 1. The maximum conductor operating temperatures for the cables in this standard is 90 °C. The cables may be: a) an integral part of the vehicle (case A of EN 61851 1); or b) a detachable cable assembly with a vehicle connector and AC supply connection to a socket outlet (case B of EN 61851 1); or c) permanently attached to a fixed charging point (case C of EN 61851 1). This standard describes cables whose safety and reliability is ensured when they are installed and/or used in accordance to the guide to use EN 50565 1 and Annex B

Amendment
9 pages
English language
sale 10% off
e-Library read for
1 day

CLC

EN IEC 60228:2024(Main)

Conductors of insulated cables

SIST EN IEC 60228:2024

IEC 60228:2023 specifies the nominal cross-sectional areas, in the range 0,5 mm2 to 3 500 mm2, for conductors in electric power cables and cords of a wide range of types. Requirements for numbers and sizes of wires and resistance values are also included. These conductors include solid, stranded and Milliken, copper, aluminium and aluminium alloy conductors in cables for fixed installations and flexible copper conductors. This document does not apply to conductors for telecommunication purposes. The applicability of this document to a particular type of cable is as specified in the standard for the type of cable. Unless specified otherwise in a particular clause, IEC 60028 ED4 relates to the conductors in the finished cable and not to the conductor as made or supplied for inclusion into a cable. Conductors described in this document are specified in metric sizes. Informative annexes provide supplementary information covering temperature correction factors for resistance measurement (Annex B) and guidance on dimensional limits of circular conductors (Annex C). This document has the status of a horizontal publication in accordance with IEC Guide 108.

Standard
27 pages
English language
sale 10% off
e-Library read for
1 day

This document covers the construction, requirements and particular test methods for flat, flexible PVC or halogen-free insulated and sheathed cables, of rated voltage Uo/U 300/500 V and above 1 mm2, Uo/U 450/750 V for use in passenger and goods lifts (elevators), and Uo/U 450/750 V for general purposes and for special applications such as hoists and travelling cranes. NOTE 1 This revision is in accordance with an agreement with CEN TC 10 to specify in the same standard a) flexible cables for lifts as required by EN 81-series, and b) flexible cable for applications such as hoists and travelling cranes, previously found in HD 359. In accordance with this agreement, only those cables in Clauses 5 and 6 are suitable for use with EN 81-series. NOTE 2 The limits for the overall diameter of the cables have been calculated in accordance with EN 60719.

Standard
31 pages
English language
sale 10% off
e-Library read for
1 day

CLC

HD 629.3 S1:2024(Main)

Test requirements for accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 3: Transition joints between cables with impregnated paper insulation and cables with extruded insulation

SIST HD 629.3 S1:2024

1.1 General This document specifies performance requirements for type tests for transition joints for use between extruded insulated power cables as specified in HD 620 and impregnated paper insulated power cables as specified in HD 621 or another relevant standard. Once type test for an accessory is successfully completed, it is not necessary to repeat the test, unless changes are made in the materials, design or manufacturing process, which might affect the performance characteristics. Possible extra thermo-mechanical forces due to high current loads from renewable sources of power generation are not covered by these tests (under consideration). Accessories for special applications such as submarine cables, ships cables or hazardous situations (explosive environments, fire resistant cables or seismic conditions) are not included. Test methods are included in EN IEC 61442:- and Annex E. NOTE 1 This document does not invalidate existing approvals of products achieved on the basis of national standards and specifications and/or the demonstration of satisfactory service performance. However, products approved according to such national standards or specifications cannot directly claim approval to this document. NOTE 2 It might be possible, subject to agreement between supplier and purchaser, and/or the relevant conformity assessment body, to demonstrate that conformity to the earlier standard can be used to claim conformity to this document, provided an assessment is made of any additional type testing that might need to be carried out. Any such additional testing that is part of a sequence of testing cannot be done separately. 1.2 Type of accessories The accessories covered by this document are straight and branch transition joints of all designs, suitable for use underground or in air. 1.3 Rated voltage The rated voltages U0/U (Um) of the accessories covered by this document are 3,6/6(7,2) - 3,8/6,6(7,2) - 6/10(12) - 6,35/11(12) - 8,7/15(17,5) - 12/20(24) - 12,7/22(24) - 18/30(36) - 19/33(36) - 20,8/36(42) kV.

Standardization document
33 pages
English language
sale 10% off
e-Library read for
1 day

CLC

HD 629.2 S3:2024(Main)

Test requirements for accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 2: Cables with impregnated paper insulation

SIST HD 629.2 S3:2024

1.1 General This document specifies performance requirements for type tests for cable accessories for use on impregnated paper insulated power cables as specified in HD 621. It is not necessary to repeat these tests, once successfully completed, unless changes are made in the materials, design or manufacturing process, which might affect the performance characteristics. Accessories for special applications such as submarine cables, ships cables or hazardous situations (explosive environments, fire resistant cables or seismic conditions) are not included. Test methods are included in EN 61442:2005. NOTE It might be possible, subject to agreement between supplier and purchaser, and/or the relevant conformity assessment body, to demonstrate that conformity to the earlier standard can be used to claim conformity to this document, provided an assessment is made of any additional type testing that might need to be carried out. Any such additional testing that is part of a sequence of testing cannot be done separately. 1.2 Type of accessories The accessories covered by this document are listed below: - indoor and outdoor terminations of all designs, including terminal boxes; - straight joints, branch joints and stop end joints of all designs, suitable for use underground or in air; - screened or unscreened plug-in type or bolted-type separable connectors capable of interfacing with bushing profiles as specified in EN 50180 series and EN 50181. 1.3 Rated voltage The rated voltages U0/U(Um) of the accessories covered by this document are 3,6/6(7,2) - 3,8/6,6(7,2) - 6/10(12) - 6,35/11(12) - 8,7/15(17,5) - 12/20(24) - 12,7/22(24) - 18/30(36) - 19/33(36) - 20,8/36(42) kV.