Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"

IEC 60079-31:2008 is applicable to electrical equipment protected by enclosure and surface temperature limitation for use in explosive dust atmospheres. It specifies requirements for design, construction and testing of electrical equipment. This standard supplements and modifies the general requirements of IEC 60079-0. Where a requirement of this standard conflicts with a requirement of IEC 60079-0, the requirement of this standard shall take precedence. This first edition of IEC 60079-31 has been developed from the first edition of IEC 61241-1 (2004) which it now cancels and supersedes. The significant changes with respect to the previous edition are: - Title changed to Equipment dust ignition protection by enclosure 't' - Combination and rationalisation of practice A and B into a single practice, and some constructional requirements that may have applied to only one practice now apply to all enclosures - Introduction of three levels of protection, 'ta', 'tb' and 'tc' - Defined test voltage ranges and overload conditions for thermal tests - Introduction of a pressure test prior to the IP test - Restrictions on power and voltage levels for level of protection 'ta' - Introduction of a variant of the IP6X test for level of protection 'ta' - Compulsory dust layer thermal test for protection level 'ta' by surrounding the enclosure with dust to a depth of at least 500 mm on all available surfaces. The contents of the corrigendum of March 2009 have been included in this copy.

Explosionsfähige Atmosphäre - Teil 31: Geräte-Staubexplosionsschutz durch Gehäuse "t"

Atmosphères explosives - Partie 31: Protection du matériel contre l'inflammation des poussières par enveloppe "t"

La CEI 60079-31:2008 est applicable au matériel électrique protégé par enveloppe et limitation de la température de surface, pour une utilisation en atmosphère de poussière explosive. Elle spécifie les exigences de conception, de construction et d'essai pour le matériel électrique. La présente norme complète et modifie les exigences générales de la CEI 60079-0. Lorsqu'une exigence de la présente norme est en conflit avec une exigence de la CEI 60079-0, l'exigence de la présente norme prévaut. Cette première édition de la CEI 60079-31 est issue de la première édition de la CEI 61241-1 (2004) qu'elle annule et remplace. Les modifications importantes par rapport à l'édition précédente sont: - Titre modifié pour Protection du matériel contre l'inflammation de poussières par enveloppe 't' - Regroupement et rationalisation des méthodes A et B en une seule méthode, et de certaines exigences de constructions qui n'étaient appliquées qu'à une seule méthode et qui maintenant sont applicables à toutes les enveloppes - Introduction des trois niveaux de protection, 'ta', 'tb' et 'tc' - Les gammes de tensions d'essai et les conditions de surcharge pour les essais thermiques ont été définies - Introduction d'un essai de pression avant l'essai IP - Réduction des niveaux de puissance et de tension pour le niveau de protection 'ta' - Introduction d'une variante de l'essai IP6X pour le niveau de protection 'ta' - Essai thermique de couche de poussière obligatoire pour le niveau de protection 'ta' par enfouissement de l'enveloppe dans de la poussière dont la couche a une épaisseur d'au moins 500 mm sur toutes les surfaces accessibles. Le contenu du corrigendum de mars 2009 a été pris en considération dans cet exemplaire.

Eksplozivne atmosfere - 31. del: Zaščita opreme pred vžigom gorljivega prahu z ohišjem "t" (IEC 60079-31:2008 + corrigendum Mar. 2009)

Ta del IEC 60079 velja za električno opremo, zaščiteno z ohišjem, in za omejevanje temperature površine za uporabo v eksplozivnih prašnih atmosferah. Določa zahteve za načrtovanje, izgradnjo in preskušanje električne opreme. Ta standard dopolnjuje in spreminja splošne zahteve IEC 60079-0. Kjer zahteva tega standarda nasprotuje zahtevi IEC 60079-0, ima zahteva tega standarda prednost. Ta standard ne velja za prah eksplozivov, ki ne potrebuje atmosferskega kisika za zgorevanje ali za piroforne snovi.  Ta standard ne velja za električno opremo, namenjeno uporabi v podzemnih delih rudnikov, in za tiste dele površinskih naprav teh rudnikov, ki jih ogroža jamski plin in/ali gorljiv prah. Ta standard ne upošteva kakršnega koli tveganje zaradi emisije gorljivih ali strupenih plinov iz prahu.

General Information

Status
Withdrawn
Publication Date
03-Dec-2009
Withdrawal Date
30-Sep-2012
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Jan-2017
Completion Date
01-Jan-2017

Relations

Buy Standard

Standard
EN 60079-31:2010
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60079-31:2010
01-marec-2010
(NVSOR]LYQHDWPRVIHUHGHO=DãþLWDRSUHPHSUHGYåLJRPJRUOMLYHJDSUDKX]
RKLãMHPW ,(&FRUULJHQGXP0DU
Explosive atmospheres -- Part 31: Equipment dust ignition protection by enclosure t
Explosionsfähige Atmosphäre -- Teil 31: Geräte - Staubexplosionsschutz durch Gehäuse
t
Atmosphères explosives -- Partie 31: Protection du matériel contre l'inflammation des
poussières par enveloppe t
Ta slovenski standard je istoveten z: EN 60079-31:2009
ICS:
29.260.20 (OHNWULþQLDSDUDWL]D Electrical apparatus for
HNVSOR]LYQDR]UDþMD explosive atmospheres
SIST EN 60079-31:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60079-31:2010

---------------------- Page: 2 ----------------------

SIST EN 60079-31:2010

EUROPEAN STANDARD
EN 60079-31

NORME EUROPÉENNE
December 2009
EUROPÄISCHE NORM

ICS 29.260.20 Supersedes EN 61241-1:2004 + corr. Dec. 2006


English version


Explosive atmospheres -
Part 31: Equipment dust ignition protection by enclosure "t"
(IEC 60079-31:2008 + corrigendum 2009)


Atmosphères explosives -  Explosionsfähige Atmosphäre -
Partie 31: Protection du matériel Teil 31: Geräte-Staubexplosionsschutz
contre l'inflammation des poussières durch Gehäuse "t"
par enveloppe "t" (IEC 60079-31:2008 + Corrigendum 2009)
(CEI 60079-31:2008 + corrigendum 2009)




This European Standard was approved by CENELEC on 2009-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60079-31:2009 E

---------------------- Page: 3 ----------------------

SIST EN 60079-31:2010
EN 60079-31:2009 - 2 -
Foreword
The text of document 31/765/FDIS, future edition 1 of IEC 60079-31, prepared by IEC TC 31, Equipment
for explosive atmospheres, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60079-31 on 2009-10-01.
This European Standard supersedes EN 61241-1:2004 + corrigendum December 2006.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-07-01
– latest date by which the national standards conflicting
(dow) 2012-10-01
with the EN have to be withdrawn
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and covers essential requirements of
EC Directive 94/9/EC. See Annex ZZ.
CENELEC/TC 31 as the responsible committee has concluded that this edition of EN 60079-31 does not
contain substantial changes regarding the ESRs.
The State of the Art is included in Annex ZY “Significant changes between this European Standard and
EN 61241-1:2004".
Annexes ZA, ZY and ZZ have been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60079-31:2008 + corrigendum March 2009 was approved by
CENELEC as a European Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60079-31:2010
- 3 - EN 60079-31:2009
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.