EN 60317-0-5:2007

Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire

This part of IEC 60317 specifies general requirements of glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire. The range of nominal conductor dimensions is given in the relevant specification sheet.

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-5: Allgemeine Anforderungen - Flachdrähte aus Kupfer, blank oder lackisoliert und umsponnen mit Glasgewebe, imprägniert mit Harz oder Lack

Spécifications pour types particuliers de fils de bobinage - Partie 0-5: Prescriptions générales - Fil de section rectangulaire en cuivre nu ou émaillé recouvert d'une tresse de fibres de verre imprégnées de résine ou de vernis

La présente partie de la CEI 60317 spécifie les exigences relatives au fil de section rectangulaire en cuivre nu ou émaillé recouvert d'une tresse de fibres de verre imprégnées de résine ou de vernis. La gamme des dimensions nominales des conducteurs est donnée dans la feuille de spécification concernée.

Specifikacije za posebne vrste navijalnih žic - 0-5. del: Splošne zahteve - Bakrena žica s pravokotnim prerezom, gola ali emajlirana, ovita z optičnimi vlakni in impregnirana s smolo ali lakom (IEC 60317-0-5:2006)

General Information

• Status: Withdrawn
• Publication Date: 03-Jan-2007
• Withdrawal Date: 30-Nov-2009
• ICS: 29.060.10 - Wires
• Technical Committee: CLC/TC 55 - Winding wires
• Drafting Committee: IEC/TC 55 - IEC_TC_55
• Parallel Committee: IEC/TC 55 - IEC_TC_55
• Ref Project: SIST EN 60317-0-5:2007 - Specifications for particular types of winding wires -- Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire

Relations

• Replaces: EN 60317-0-5:1994 - Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire
• Effective Date: 29-Jan-2023
• Replaces: EN 60317-0-5:1994/A1:1998 - Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire
• Effective Date: 29-Jan-2023
• Replaces: EN 60317-0-5:1994/A2:2000 - Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire
• Effective Date: 29-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-5: Allgemeine Anforderungen - Flachdrähte aus Kupfer, blank oder lackisoliert und umsponnen mit Glasgewebe, imprägniert mit Harz oder LackSpécifications pour types particuliers de fils de bobinage -- Partie 0-5: Prescriptions générales - Fil de section rectangulaire en cuivre nu ou
émaillé recouvert d'une tresse de fibres de verre imprégnées de résine ou de vernisSpecifications for particular types of winding wires -- Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire29.060.10ŽiceWiresICS:Ta slovenski standard je istoveten z:EN 60317-0-5:2007SIST EN 60317-0-5:2007en01-februar-2007SIST EN 60317-0-5:2007SLOVENSKI
STANDARD



SIST EN 60317-0-5:2007



EUROPEAN STANDARD EN 60317-0-5 NORME EUROPÉENNE
EUROPÄISCHE NORM January 2007
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60317-0-5:2007 E
ICS 29.060.10 Supersedes EN 60317-0-5:1994 + A1:1998 + A2:2000
English version
Specifications for particular types of winding wires Part 0-5: General requirements -
Glass-fibre braided resin or varnish impregnated,
bare or enamelled rectangular copper wire (IEC 60317-0-5:2006)
Spécifications pour types particuliers
de fils de bobinage
Partie 0-5: Prescriptions générales -
Fil de section rectangulaire en cuivre nu ou émaillé recouvert d'une tresse
de fibres de verre imprégnées
de résine ou de vernis (CEI 60317-0-5:2006)
Technische Lieferbedingungen
für bestimmte Typen von Wickeldrähten Teil 0-5: Allgemeine Anforderungen -
Flachdrähte aus Kupfer,
blank oder lackisoliert und umsponnen
mit Glasgewebe, imprägniert
mit Harz oder Lack (IEC 60317-0-5:2006)
This European Standard was approved by CENELEC on 2006-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 60317-0-5:2007



EN 60317-0-5:2006
- 2 -
Foreword The text of document 55/993/CDV, future edition 2 of IEC 60317-0-5, prepared by IEC TC 55, Winding wires, was submitted to the IEC-CENELEC parallel Unique Acceptance Procedure and was approved by CENELEC as EN 60317-0-5 on 2006-12-01. This European Standard supersedes EN 60317-0-5:1994 + A1:1998 + A2:2000. The main changes from EN 60317-0-5:1994 are to the abbreviations used for the various glass fibre wound winding wires described in the scope of the standard, and provided in Tables 4 and 7. This standard is to be used in conjunction with the EN 60851 series. The clause numbers used in this part of EN 60317 are identical with the respective test numbers of EN 60851. In case of inconsistencies between EN 60851 and this part of EN 60317, the latter shall prevail. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2007-09-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2009-12-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60317-0-5:2006 was approved by CENELEC as a European Standard without any modification. __________ SIST EN 60317-0-5:2007



- 3 - EN 60317-0-5:2006 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modif
...