EN 62153-1-1:2004

Metallic communication cables test methods - Part 1-1: Electrical - Measurement of the pulse/step return loss in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT)

Describes the test which determines the regularity of impedance of r.f. cables by measuring the return loss in the frequency domain using a vector network analyser equipped with a reflection test set (bridge) and transferring the results into the time domain by using the Inverse Discrete Fourier Transformation (IDFT).

Prüfverfahren für metallische Kommunikationskabel - Teil 1-1: Impuls-/Sprungreflexion aus der Messung im Frequenzbereich über inverse diskrete Fouriertransformation (IDFT)

Méthodes d'essai des câbles métalliques de communication - Partie 1-1: Electrique - Mesure de la perte par réflexions à une impulsion/échelon dans le domaine fréquentiel en utilisant la Transformée Inverse de Fourier Discrète (TIFD)

Décrit un essai qui détermine la régularité d'impédance des câbles pour fréquences radioélectriques (RF) en mesurant la perte par réflexions dans le domaine fréquentiel. Cette mesure est effectuée en utilisant un analyseur vectoriel de réseaux équipé d'un mesureur de réflexion (pont) et en transposant les résultats obtenus dans le domaine temporel en utilisant la Transformée Inverse de Fourier Discrète (TIFD).

Metallic communication cables test methods - Part 1-1: Electrical - Measurement of the pulse/step return loss in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT) (IEC 62153-1-1:2003)

General Information

• Status: Published
• Publication Date: 07-Jan-2004
• Withdrawal Date: 30-Nov-2006
• ICS: 33.100 - Electromagnetic compatibility (EMC)
• ICS: 33.120.10 - Coaxial cables. Waveguides
• Technical Committee: CLC/TC 46X - Communication cables
• Drafting Committee: CLC/SC 46XA - Coaxial cables
• Parallel Committee: IEC/SC 46A - IEC_SC_46A
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 08-Jan-2004
• Completion Date: 08-Jan-2004
• Ref Project: SIST EN 62153-1-1:2004 - Metallic communication cables test methods -- Part 1-1: Electrical - Measurement of the pulse/step return loss in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT)

Standards Content (Sample)

SLOVENSKI SIST EN 62153-1-1:2004

STANDARD
april 2004
Metallic communication cables test methods - Part 1-1: Electrical - Measurement of
the pulse/step return loss in the frequency domain using the Inverse Discrete
Fourier Transformation (IDFT) (IEC 62153-1-1:2003)
ICS 33.120.10 Referenčna številka
SIST EN 62153-1-1:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 62153-1-1
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2004

ICS 33.100; 33.120.10


English version


Metallic communication cables test methods
Part 1-1: Electrical –
Measurement of the pulse/step return loss in the frequency domain
using the Inverse Discrete Fourier Transformation (IDFT)
(IEC 62153-1-1:2003)


Méthodes d'essai des câbles métalliques Prüfverfahren für metallische
de communication Kommunikationskabel
Partie 1-1: Electrique – Teil 1-1: Impuls-/Sprungreflexion aus
Mesure de la perte par réflexions der Messung im Frequenzbereich über
à une impulsion/échelon dans le domaine inverse diskrete Fouriertransformation
fréquentiel en utilisant la Transformée (IDFT)
Inverse de Fourier Discrète (TIFD) (IEC 62153-1-1:2003)
(CEI 62153-1-1:2003)


This European Standard was approved by CENELEC on 2003-12-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 62153-1-1:2004 E

---------------------- Page: 2 ----------------------

EN 62153-1-1:2004 - 2 -
Foreword
The text of document 46A/559/FDIS, future edition 1 of IEC 62153-1-1, prepared by SC 46A, Coaxial
cables, of IEC TC 46, Cables, wires, waveguides, r.f. connectors, r.f. and microwave passive
components and accessories, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 62153-1-1 on 2003-12-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62153-1-1:2003 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 62153-1-1:2004
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050 Série International Electrotechnical - -
Vocabulary (IEV)

IEC 61156-1 2002 Multicore and symmetrical pair/quad - -
cables for digital communications
Part 1: Generic specification

IEC 61196-1 1995 Radio-frequency cables - -
Part 1: Generic specification - General,
definitions, requirements and test
methods
A1 1999 - -

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE IEC
62153-1-1
INTERNATIONAL
Première édition
STANDARD
First edition
2003-10
Méthodes d'essai des câbles métalliques
de communication –
Partie 1-1:
Electrique – Mesure de la perte par réflexions
à un
...