Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 11: EVA cords and flexible cables

This Part 11 of the HD details the particular specifications for cross-linked EVA or equivalent synthetic elastomer insulated and vulcanised EVA or equivalent synthetic elastomer sheathed cords and flexible cables of rated voltages up to and including 300/500 V for use with a conductor temperature not exceeding 110 °C. Each cable shall comply with the appropriate requirements given in Part 1 of this HD and the particular requirements of this part. NOTE The overall dimensions of the cables in this part of HD 22 have been calculated in accordance with EN 60719.

Starkstromleitungen mit vernetzter Isolierhülle für Nennspannungen bis 450/750 V - Teil 11: EVA-Schlauchleitungen

Dieser Teil 11 ist die Bauart-Norm für wärmebeständige Gummischlauchleitungen mit Isolierhülle und Mantel aus vernetztem EVA oder einem gleichwertigen synthetischen Elastomer mit Nennspannungen bis einschließlich 300/500 V für eine maximale Leitertemperatur von 110 °C. Alle Leitungen müssen mit den in Teil 1 von diesem HD angegebenen Anforderungen und den besonderen Anforderungen dieses Teils übereinstimmen. ANMERKUNG Die Außenmaße der Leitungen nach diesem Teil des HD 22 sind in Übereinstimmung mit EN 60719 errechnet worden.

Conducteurs et câbles isolés avec des matériaux réticulés de tension assignée au plus égale à 450/750 V - Partie 11: Câbles souples à isolation EVA

La présente Partie 11 de ce HD précise les spécifications particulières applicables aux câbles souples à isolation et gaine EVA vulcanisé ou élastomère synthétique équivalent, de tension assignée au plus égale à 300/500 V pour une température maximale de l’âme de 110 °C. Chaque câble doit répondre aux prescriptions appropriées données dans la Partie 1 de ce HD et aux prescriptions particulières de la présente partie. NOTE Les dimensions extérieures de la présente partie du HD 22 ont été calculées conformément à la EN 60719.

Kabli z omreženo izolacijo za naznačene napetosti do vključno 450/750 V – 11. del: EVA-vrvice in zvijavi kabli

Določa posebne specifikacije za omreženo EVA ali ekvivalentno sintetično elastomerno izolirano in vulkanizirano EVA, ali ekvivalentno sintetično elastomerno oplaščene vrvice in zvijave kable za naznačene napetosti do vključno 300/500 V, za uporabo pri prevodni temperaturi, ki ne presega 110 oC.

General Information

Status
Withdrawn
Publication Date
21-Feb-2007
Withdrawal Date
30-Nov-2008
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
17-Jan-2014
Completion Date
17-Jan-2014

Relations

Buy Standard

Standardization document
HD 22.11 S2:2007
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2007
1DGRPHãþD
SIST HD 22.11 S1:1998
SIST HD 22.11 S1:1998/A1:1999
.DEOL]RPUHåHQRL]RODFLMR]DQD]QDþHQHQDSHWRVWLGRYNOMXþQR9±GHO
(9$YUYLFHLQ]YLMDYLNDEOL
Cables of rated voltages up to and including 450/750 V and having cross-linked
insulation -- Part 11: EVA cords and flexible cables
Starkstromleitungen mit vernetzter Isolierhülle für Nennspannungen bis 450/750 V – Teil
11: EVA-Schlauchleitungen
Conducteurs et câbles isolés avec des matériaux réticulés de tension assignée au plus
égale a 450/750 V – Partie 11: Câbles souples a isolation EVA
Ta slovenski standard je istoveten z: HD 22.11 S2:2007
ICS:
29.060.20 Kabli Cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

HARMONIZATION DOCUMENT
HD 22.11 S2
DOCUMENT D'HARMONISATION
February 2007
HARMONISIERUNGSDOKUMENT
ICS 29.060.20 Supersedes HD 22.11 S1:1995 + A1:1999

English version
Cables of rated voltages up to and including 450/750 V
and having cross-linked insulation –
Part 11: EVA cords and flexible cables

Conducteurs et câbles isolés  Starkstromleitungen mit vernetzter
avec des matériaux réticulés Isolierhülle für Nennspannungen
de tension assignée bis 450/750 V –
au plus égale à 450/750 V – Teil 11: EVA-Schlauchleitungen
Partie 11: Câbles souples à isolation EVA

This Harmonization Document was approved by CENELEC on 2006-12-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for implementation of this
Harmonization Document at national level.

Up-to-date lists and bibliographical references concerning such national implementations may be obtained on
application to the Central Secretariat or to any CENELEC member.

This Harmonization Document exists in three official versions (English, French, German).

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. HD 22.11 S2:2007 E
Foreword
This Harmonization Document was prepared by the Technical Committee CENELEC TC 20,
Electric cables.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by
CENELEC as HD 22.11 S2 on 2006-12-01.
This Harmonization Document supersedes HD 22.11 S1:1995 + A1:1999.
The following dates were fixed:
– latest date by which the existence of the HD
has to be announced at national level (doa) 2007-06-01
– latest date by which the HD has to be implemented
at national level by publication of a harmonized
national standard or by endorsement (dop) 2007-12-01

– latest date by which the national standards conflicting
(dow) 2008-12-01
with the HD have to be withdrawn
HD 22, Cables of rated voltages up to and including 450/750 V and having cross-linked
insulation, now has the following parts:
HD 22.1 S4 General requirements
1)
Test methods
HD 22.2 S3
HD 22.3 S4 Heat resistant silicone rubber insulated cables
HD 22.4 S4 Cords and flexible cables
HD 22.5 (Spare)
HD 22.6 S2 Arc welding cables
HD 22.7 S2 Cables with increased heat resistance for internal wiring for a conductor
temperature of 110 °C
HD 22.8 S2 Polychloroprene or equivalent synthetic elastomer sheathed cable for
decorative chains
HD 22.9 S3 Single core halogen-free non-sheathed cables for fixed wiring having low
emission of smoke
HD 22.10 S2 EPR insulated and polyurethane sheathed flexible cables
HD 22.11 S2 EVA cords and flexible cables
HD 22.12 S2 Heat resistant EPR cords and flexible cables
HD 22.13 S2 Halogen-free flexible cables having low emission of smoke
HD 22.14 S3 Cords for applications requiring high flexibility
HD 22.15 S2 Multicore cables insulated and sheathed with heat resistant silicone
rubber
HD 22.16 S2 Water resistant polychloroprene or equivalent synthetic elastomer
sheathed cables
__________
1)
HD 22.2 is superseded by EN 50395 and EN 50396.

- 3 - HD 22.11 S2:2007
Contents
Page
1 Scope.4
2 Normative references.4
3 Ordinary heat-resistant EVA or equivalent synthetic elastomer insulated and
EVA or equivalent synthetic elastomer sheathed cord and cable for a maximum
conductor temperature of 110 °C.4
3.1 Code designation.4
3.2 Rated voltage.4
3.3 Construction.4
3.4 Tests.5
3.5 Guide to use (informative) .5
Annex A (normative) Requirements for compatibility test .8
Bibliography.9
Table 1 - Dimensions of Type H05GG-F and H05GGH2-F.6
Table 2 - Tests for types H05GG-F and H05GGH2-F .7
Table A.1 - Requirements .8

1 Scope
This Part 11 of the HD details the particular specifications for cross-linked EVA or equivalent
synthetic elastomer insulated and vulcanised EVA or equivalent synthetic elastomer sheathed
cords and flexible cables of rated voltages up to and including 300/500 V for use with a
conductor temperature not exceeding 110 °C.

Each cable shall comply with the appropriate requirements given in Part 1 of this HD and the
particular requirements
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.