iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60745-2-1:2003/A11:2007

(Amendment)

Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills

Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills

Superseded by EN 60745-2-1:2010

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-1: Besondere Anforderungen für Bohrmaschinen und Schlagbohrmaschinen

Outils électroportatifs à moteurs - Sécurité - Partie 2-1: Règles particulières pour les perceuses

Ročna električna orodja - Varnost - 2-1. del: Posebne zahteve za vrtalnike in udarne (vibracijske)vrtalnike

General Information

Status
Withdrawn
Publication Date
29-Jan-2007
Withdrawal Date
30-Jun-2007
ICS
25.140.20 - Electric tools
25.140.30 - Hand-operated tools
Technical Committee
CLC/TC 116 - Safety of hand-held motor-operated electric tools
Drafting Committee
IEC/TC 116 - Safety of hand-held motor-operated electric tools
Parallel Committee
IEC/SC 61F - IEC_SC_61F --> TC 116
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Feb-2013
Completion Date
01-Feb-2013
Directive
98/37/EC - Machinery
Ref Project
SIST EN 60745-2-1:2003/A11:2007 - Hand-held motor-operated electric tools - Safety -- Part 2-1: Particular requirements for drills and impact drills

Relations

Replaced By
EN 60745-2-1:2010 - Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills
Effective Date
28-Jan-2023
Amends
EN 60745-2-1:2003 - Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills
Effective Date
28-Jan-2023

Buy Standard

EN 60745-2-1:2003/A11:2007EN 60745-2-1:2003/A11:2007
PreviousNext
Amendment
EN 60745-2-1:2003/A11:2007
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60745-2-1:2003/A11:2007
01-maj-2007
5RþQDHOHNWULþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DYUWDOQLNHLQ
XGDUQH YLEUDFLMVNH YUWDOQLNH
Hand-held motor-operated electric tools - Safety -- Part 2-1: Particular requirements for
drills and impact drills
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-1: Besondere
Anforderungen für Bohrmaschinen und Schlagbohrmaschinen
Outils électroportatifs à moteurs - Sécurité -- Partie 2-1: Règles particulières pour les
perceuses
Ta slovenski standard je istoveten z: EN 60745-2-1:2003/A11:2007
ICS:
25.080.40 Vrtalniki Drilling machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 60745-2-1:2003/A11:2007 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60745-2-1:2003/A11:2007

---------------------- Page: 2 ----------------------

SIST EN 60745-2-1:2003/A11:2007


EUROPEAN STANDARD
EN 60745-2-1/A11

NORME EUROPÉENNE
January 2007
EUROPÄISCHE NORM

ICS 25.140.20; 25.140.30


English version


Hand-held motor-operated electric tools -
Safety -
Part 2-1: Particular requirements for drills and impact drills



Outils électroportatifs à moteurs -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-1: Règles particulières Sicherheit -
pour les perceuses Teil 2-1: Besondere Anforderungen
für Bohrmaschinen und
Schlagbohrmaschinen





This amendment A11 modifies the European Standard EN 60745-2-1:2003; it was approved by CENELEC on
2006-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-1:2003/A11:2007 E

---------------------- Page: 3 ----------------------

SIST EN 60745-2-1:2003/A11:2007
EN 60745-2-1:2003/A11:2007 – 2 –
Foreword
This amendment to the European Standard EN 60745-2-1:2003 was prepared by the Technical
Committee CENELEC TC 61F, Safety of hand-held and transportable motor-operated electric tools. The
text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC
as amendment A11 to EN 607445-2-1:2003 on 2006-07-01.
This amendment was prepared to align Subclause 6.2 with the new Subclause 6.2 in
EN 60745-1:2006. Moreover, vibration values determined with the new 6.2 are complying with the
requirements of the Physical Agents Directive Vibration 2002/44/EC.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-07-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2007-07-01

_________________

---------------------- Page: 4 ----------------------

SIST EN 60745-2-1:2003/A11:2007
– 3 – EN 60745-2-1:2003/A11:2007
Foreword
th
Replace the 7 paragraph by:
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and covers essential requirements of
EC Directive 98/37/EC (Machinery Directive), amended by Directive 98/79/EC. See Annex ZZ.
th th
Replace the 11 and 12 paragraphs by:
This standard follows the overall requirements of EN ISO 12100-1 and EN ISO 12100-2.
This Part 2-1 is to be used in conjunction with EN 60745-1:2006. When this standard states "addition",
"modification" or "replacement", the relevant text in Part 1 is to be adapted accordingly.
3 Definitions
Add the following new definition:
3.101.Z1
diamond core drill
drill designed to be equ
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 62841-2-11:2016/A1:2020(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
SIST EN 62841-2-11:2016/A1:2020

2020-01-06 JF: the Annex ZZ which had been approved by  the BT is not the most recent one -> need to submit the correct Annex ZZ to the BT. The BT document under preparation.
2019-11-05 JF: Through the BT decision D163/C100, the BT approved the revised Annex ZZ of the standard. Standard under publlication.
NEXT ACTION: CCMC ACTION BY 2019-08-30: submission of the revised Annex ZZ for the BT approval.
Compliant assessment of the Annex ZA received.
2019-05-08 JF: HAS Consultants confirmed that the request for assessment will be accepted but asked to  issue a new request by CCMC. CCMC made a new request. The indicative deadline to receive it: 2019-06-12
2019-04-19 JF: EC clarified that HAS Consutlants will carry out the assessment of the corrected Annex ZZ. NEXT ACTION: HAS CONSULTANT ASSESSMENT EXPECTED BY 2019-05-23.
2019-01-30 Assessment request rejected by HAS Consultants on the grounds that it is a second requset at this stage. CCMC asked the EC to clarify.
2019-

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62841-2-11:2016(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
SIST EN 62841-2-11:2016

IEC 62841-2-11:2015 applies to applies to reciprocating saws such as jig saws and sabre saws.The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools is given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. This Part 2-11 is to be used in conjunction with the first edition of IEC 62841-1. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication. Key words: reciprocating saw, jig saw, sabre saw, hand-held tool, transportable tool

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60745-2-4:2009(Main)
Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
SIST EN 60745-2-4:2010

Applies to sanders with the exception of all types of disc-type sanders, which are covered by IEC 60745-2-3. Tools covered include but are not limited to belt sanders, reciprocating sanders or polishers, orbital sanders or polishers, and random orbit sanders or polishers.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62841-2-11:2016/FprAB:2024(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
SIST EN 62841-2-11:2016/kFprAB:2024

This part of EN 62841 applies to reciprocating saws such as jig saws and sabre saws.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62841-2-11:2016/A1:2020(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
SIST EN 62841-2-11:2016/A1:2020

2020-01-06 JF: the Annex ZZ which had been approved by  the BT is not the most recent one -> need to submit the correct Annex ZZ to the BT. The BT document under preparation.
2019-11-05 JF: Through the BT decision D163/C100, the BT approved the revised Annex ZZ of the standard. Standard under publlication.
NEXT ACTION: CCMC ACTION BY 2019-08-30: submission of the revised Annex ZZ for the BT approval.
Compliant assessment of the Annex ZA received.
2019-05-08 JF: HAS Consultants confirmed that the request for assessment will be accepted but asked to  issue a new request by CCMC. CCMC made a new request. The indicative deadline to receive it: 2019-06-12
2019-04-19 JF: EC clarified that HAS Consutlants will carry out the assessment of the corrected Annex ZZ. NEXT ACTION: HAS CONSULTANT ASSESSMENT EXPECTED BY 2019-05-23.
2019-01-30 Assessment request rejected by HAS Consultants on the grounds that it is a second requset at this stage. CCMC asked the EC to clarify.
2019-

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62841-2-11:2016(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
SIST EN 62841-2-11:2016

IEC 62841-2-11:2015 applies to applies to reciprocating saws such as jig saws and sabre saws.The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools is given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. This Part 2-11 is to be used in conjunction with the first edition of IEC 62841-1. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication. Key words: reciprocating saw, jig saw, sabre saw, hand-held tool, transportable tool

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60745-2-4:2009(Main)
Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
SIST EN 60745-2-4:2010

Applies to sanders with the exception of all types of disc-type sanders, which are covered by IEC 60745-2-3. Tools covered include but are not limited to belt sanders, reciprocating sanders or polishers, orbital sanders or polishers, and random orbit sanders or polishers.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62841-2-11:2016/FprAB:2024(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
SIST EN 62841-2-11:2016/kFprAB:2024

This part of EN 62841 applies to reciprocating saws such as jig saws and sabre saws.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61169-70:2024(Main)
Radio-frequency connectors - Part 70: Sectional specification for series HD-BNC radio-frequency coaxial connectors - Characteristic Impedance 75 Ω
SIST EN IEC 61169-70:2024

IEC 61169-70:2024, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) of HD-BNC series RF coaxial connectors together with the pro forma blank detail specification. HD-BNC series connectors with characteristic impedance of 75 Ω are used with RF cables or micro-strips in microwave, telecommunication, wireless and other fields. The operating frequency limit is up to 18 GHz. It also prescribes mating face dimensions for general purpose connectors, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to series HD-BNC RF connectors. This specification indicates the recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H.

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61300-2-44:2024(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices and components
SIST EN IEC 61300-2-44:2024

IEC 61300-2-44:2024 specifies a test to determine the influence of flexing under tensile load of the strain relief of fibre optic interconnecting devices or components. The intention is to simulate the number of flexing cycles which would typically be experienced during service life. This test is applied to both single fibre cable and multiple fibre cable. This fourth edition cancels and replaces the third edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) replaced active monitoring with transient loss for measurements during test; b) harmonized recommended severities according to IEC 61753-1.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day