EN 61587-4:2012

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 4: Combination of performance levels for modular cabinets

IEC 61587-4:2012 provides the combinations of different degrees of protection for cabinet systems regarding IP code, climate levels, static and dynamics load tests, electromagnetic shielding and seismic requirements. Optimal economical solution can be ensured by ordering a cabinet with specific properties for which this design guide provides the easy selection of defined performance levels. Keywords: Modular cabinets

Mechanische Bauweisen für elektronische Einrichtungen - Prüfungen für die Normenreihen IEC 60917 und IEC 60297 - Teil 4: Kombination von Anforderungsstufen für modulare Schränke

Structures mécaniques pour équipement électronique - Essais pour les séries CEI 60917 et CEI 60297 - Partie 4: Combinaison des niveaux de performance pour les baies modulaires

La CEI 61587-4:2012 donne des combinaisons de différents degrés de protection pour les systèmes de baie concernant les exigences en matière de code IP, de niveaux climatiques, d'essais de charges statiques et dynamiques, de blindage électromagnétique et de niveau sismique. Le présent guide de conception permet une sélection facile des niveaux de performance définis pour des économies optimisées par la commande d'une baie présentant des propriétés spécifiques. Mots clé : baies modulaires

Mehanske strukture elektronske opreme - Preskusi za IEC 60917 in IEC 60297 - 4. del: Kombinacija ravni zmogljivosti modularnih omaric

Ta del standarda IEC 61587 določa kombinacije različnih stopenj zaščite za sisteme omaric v zvezi s kodo IP, podnebnimi ravnmi, statičnimi in dinamičnimi preskusi obremenitve, elektromagnetnim zaslanjanjem in potresnimi zahtevami. Optimalna ekonomska rešitev se lahko zagotovi z naročilom omaric s specifičnimi lastnostmi, za katere je v tem načrtu

General Information

• Status: Published
• Publication Date: 11-Oct-2012
• Withdrawal Date: 16-Sep-2015
• ICS: 31.240 - Mechanical structures for electronic equipment
• Technical Committee: CLC/SR 48D - Mechanical structures for electronic equipment
• Drafting Committee: IEC/SC 48D - IEC_SC_48D
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 12-Oct-2012
• Completion Date: 12-Oct-2012
• Ref Project: SIST EN 61587-4:2013 - Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 4: Combination of performance levels for modular cabinets

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61587-4:2013
01-januar-2013
Mehanske strukture elektronske opreme - Preskusi za IEC 60917 in IEC 60297 - 4.
del: Kombinacija ravni zmogljivosti modularnih omaric
Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 -
Part 4: Combination of performance levels for modular cabinets
Structures mécaniques pour équipement électronique - Essais pour la CEI 60917 et la
CEI 60297 - Partie 4: Combinaison des niveaux de performance pour les baies
modulaires
Ta slovenski standard je istoveten z: EN 61587-4:2012
ICS:
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
SIST EN 61587-4:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61587-4:2013

---------------------- Page: 2 ----------------------

SIST EN 61587-4:2013

EUROPEAN STANDARD
EN 61587-4

NORME EUROPÉENNE
October 2012
EUROPÄISCHE NORM

ICS 31.240


English version


Mechanical structures for electronic equipment -
Tests for IEC 60917 and IEC 60297 series -
Part 4: Combination of performance levels for modular cabinets
(IEC 61587-4:2012)


Structures mécaniques pour équipement Mechanische Bauweisen für elektronische
électronique - Einrichtungen -
Essais pour les séries CEI 60917 Prüfungen für die Normenreihen
et CEI 60297 - IEC 60917 und IEC 60297 -
Partie 4: Combinaison des niveaux de Teil 4: Kombination von
performance pour les baies modulaires Anforderungsstufen für modulare
(CEI 61587-4:2012) Schränke
(IEC 61587-4:2012)




This European Standard was approved by CENELEC on 2012-09-17. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61587-4:2012 E

---------------------- Page: 3 ----------------------

SIST EN 61587-4:2013
EN 61587-4:2012 - 2 -
Foreword
The text of document 48D/514/FDIS, future edition 1 of IEC 61587-4, prepared by SC 48D
"Mechanical structures for electronic equipment" of IEC/TC 48 "Electromechanical components and
mechanical structures for electronic equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 61587-4:2012.
The following dates are fixed:
(dop) 2013-06-17
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-09-17
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 61587-4:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60297 Series NOTE Harmonised as EN 60297 Series (not modified).
IEC 60917 Series NOTE Harmonised as EN 60917 Series (not modified).
IEC 60950-1 NOTE Harmonised as EN 60950-1.

---------------------- Page: 4 ----------------------

SIST EN 61587-4:2013
- 3 - EN 61587-4:2012
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
...